9,465 research outputs found

    The effect of tool fixturing quality on the design of condition monitoring systems for detecting tool conditions

    Get PDF
    Condition monitoring systems of machining processes are essential technology for improving productivity and automation. Tool wear monitoring of cutting tools is one of the important applications in this area. In this paper, the effect of collet fixturing quality on the design of condition monitoring systems to detect tool wear is discussed. The paper investigates the difference in the system's behaviour and the changes in the condition monitoring system when the cutting tool is not rigidly fastened to the collet. A group of sensors, namely acoustic emission, force, strain, vibration and sound, are used to design the condition monitoring system. Automated Sensor and Signal Processing Selection (ASPS) approach1 is implemented to address the effect of the tool holding device (collet) on the monitoring system and the most sensitive sensors and signal processing method to detect tool wear. The results prove that the change in the fixturing quality could have significant effect on the design of the condition monitoring system and the behaviour of the system

    Sensitivity limits of an infrared heterodyne spectrometer for astrophysical applications

    Get PDF
    A discussion and an evaluation of the degradation in sensitivity is given for a heterodyne spectrometer employing a HgCdTe photodiode mixer and tunable diode lasers. The minimum detectable source brightness is considered as a function of the mixer parameters, transmission coefficient of the beam splitter, and local oscillator emission powers. The degradation in the minimum detectable line source brightness which results from the bandwidth being a function of the line width is evaluated and plotted as a function of the wavelength and bandwidth for various temperature to mass ratios. It is shown that the minimum achievable degradation in the sensitivity of a practical astronomical heterodyne spectrometer is approximately 30. Estimates of signal-to-noise ratios with which infrared line emission from astronomical sources of interest may be detected are given

    The 43GHz SiO maser in the circumstellar envelope of the AGB star R Cassiopeiae

    Full text link
    We present multi-epoch, total intensity, high-resolution images of 43GHz, v=1, J=1-0 SiO maser emission toward the Mira variable R Cas. In total we have 23 epochs of data for R Cas at approximate monthly intervals over an optical pulsation phase range from 0.158 to 1.78. These maps show a ring-like distribution of the maser features in a shell, which is assumed to be centred on the star at a radius of 1.6 to 2.3 times the stellar radii. It is clear from these images that the maser emission is significantly extended around the star. At some epochs a faint outer arc can be seen at 2.2 stellar radii. The intensity of the emission waxes and wanes during the stellar phase. Some maser features are seen infalling as well as outflowing. We have made initial comparisons of our data with models by Gray et. al. (2009).Comment: 12 pages, 14 figure

    Spectral characteristics of normal and nutrient-deficient maize leaves

    Get PDF
    Reflectance, transmittance and absorbance spectra of normal and six types of mineral-deficient (N,P,K,S,Mg and Ca) maize (Zea mays L.) leaves were analyzed at 30 selected wavelengths along the electromagnetic spectrum from 500 to 2600 nm. Chlorophyll content and percent leaf moisture were also determined. Leaf thermograms were obtained for normal, N- and S- deficient leaves. The results of the analysis of variance showed significant differences in reflectance, transmittance and absorbance in the visible wavelengths among leaf numbers 3, 4, and 5, among the seven nutrient treatments, and among the interactions of leaves and treatments. In the reflective infrared wavelengths only treatments produced significant differences. The chlorophyll content of leaves was reduced in all deficiencies in comparison to controls. Percent moisture was increased in S-, Mg- and N- deficiencies. Positive correlation (r = 0.707) between moisture content and percent absorption at both 1450 and 1930 nm were obtained. Polynomial regression analysis of leaf thickness and leaf moisture content showed that these two variables were significantly and directly related (r = 0.894)

    Unstable Disk Galaxies. II. the Origin of Growing and Stationary Modes

    Full text link
    I decompose the unstable growing modes of stellar disks to their Fourier components and present the physical mechanism of instabilities in the context of resonances. When the equilibrium distribution function is a non-uniform function of the orbital angular momentum, the capture of stars into the corotation resonance imbalances the disk angular momentum and triggers growing bar and spiral modes. The stellar disk can then recover its angular momentum balance through the response of non-resonant stars. I carry out a complete analysis of orbital structure corresponding to each Fourier component in the radial angle, and present a mathematical condition for the occurrence of van Kampen modes, which constitute a continuous family. I discuss on the discreteness and allowable pattern speeds of unstable modes and argue that the mode growth is saturated due to the resonance overlapping mechanism. An individually growing mode can also be suppressed if the corotation and inner Lindblad resonances coexist and compete to capture a group of stars. Based on this mechanism, I show that self-consistent scale-free disks with a sufficient distribution of non-circular orbits should be stable under perturbations of angular wavenumber m>1m>1. I also derive a criterion for the stability of stellar disks against non-axisymmetric excitations.Comment: 15 Pages (emulateapj), 7 Figures, Accepted for Publication in The Astrophysical Journa

    Complex Role of Secondary Electron Emissions in Dust Grain Charging in Space Environments: Measurements on Apollo 11 and 17 Dust Grains

    Get PDF
    Dust grains in various astrophysical environments are generally charged electrostatically by photoelectric emissions with radiation from nearby sources, or by electron/ion collisions by sticking or secondary electron emissions. Knowledge of the dust grain charges and equilibrium potentials is important for understanding of a variety of physical and dynamical processes in the interstellar medium (ISM), and heliospheric, interplanetary, planetary, and lunar environments. The high vacuum environment on the lunar surface leads to some unusual physical and dynamical phenomena involving dust grains with high adhesive characteristics, and levitation and transportation over long distances. It has been well recognized that the charging properties of individual micron/submicron size dust grains are expected to be substantially different from the corresponding values for bulk materials and theoretical models. In this paper we present experimental results on charging of individual dust grains selected from Apollo 11 and Apollo 17 dust samples by exposing them to mono-energetic electron beams in the 10- 400 eV energy range. The charging rates of positively and negatively charged particles of approximately 0.2 to 13 microns diameters are discussed in terms of the secondary electron emission (SEE) process, which is found to be a complex charging process at electron energies as low as 10-25 eV, with strong particle size dependence. The measurements indicate substantial differences between dust charging properties of individual small size dust grains and of bulk materials

    Lunar Dust Charging by Secondary Electron Emission and its Complex Role in the Lunar Environment

    Get PDF
    The lunar surface is covered with a thick layer of micron/sub-micron size dust grains formed by billions of years of meteoritic impact. With virtually no atmosphere and exposed to the solar wind plasma and solar electromagnetic radiation, the lunar surface and the dust grains are electrostatically charged. The dominant charging processes include: photoelectric emissions (UV, X-rays), impact of solar wind electrons and ions, and secondary electron emissions (SEE) induced by energetic solar wind electrons. During the Apollo missions, the astronauts found the lunar dust to be extraordinarily high in its adhesive characteristics, sticking to the suits and the mechanical equipment. Electrostatically charged lunar dust is believed to be transported over long distances by the induced electric fields, as indicated by the observed dust streamers and the horizon glow [e.g., 1-3]. The hazardous effects of dust in the lunar environment are recognized to be one of the major issues that must be addressed in planning the forthcoming missions for robotic and human exploration of the Moon. Theoretical studies are being performed along with the development of analytical models and a variety of experimental investigations, to better understand the lunar dust phenomena. [e.g., 4-6]. The lunar dust is believed to be charged negatively on the lunar night-side by interaction With solar wind electrons. However, rigorous theoretical expressions for calculation of SEE yields and the sticking efficiencies of individual micron size dust grains are not yet available, and the information has to be obtained by experiment. On theoretical considerations, however, it is well recognized that SEE yields, similar to the photoelectric yields for small-size grains, would be totally different from the corresponding bulk values [e.g., 7-9]. Some theoretical models for charging of individual small spherical particles have been developed [e.g., 10], and some limited measurements on individual metallic dust grains at keV electron energies have been made [e.g., i 1]. In this paper, we present the first measurements of the secondary electron emission yields of individual micron/sub-micron size dust grains selected from sample returns of Apollo 11 and Apollo 17 missions

    Scale-free equilibria of self-gravitating gaseous disks with flat rotation curves

    Full text link
    We introduce exact analytical solutions of the steady-state hydrodynamic equations of scale-free, self-gravitating gaseous disks with flat rotation curves. We express the velocity field in terms of a stream function and obtain a third-order ordinary differential equation (ODE) for the angular part of the stream function. We present the closed-form solutions of the obtained ODE and construct hydrodynamical counterparts of the power-law and elliptic disks, for which self-consistent stellar dynamical models are known. We show that the kinematics of the Large Magellanic Cloud can well be explained by our findings for scale-free elliptic disks.Comment: AAS preprint format, 21 pages, 8 figures, accepted for publication in The Astrophysical Journa
    corecore