3,738 research outputs found

    Photographic quantification of water quality in mixing zones

    Get PDF
    A method was developed to quantitatively delineate waste concentrations throughout waste effluent mixing zones on the basis of densitometric measurements extracted from aerial photography. A mixing zone is the extent of a receiving water body ultilized to dilute a waste discharge to a concentration characteristic of a totally mixed condition. Simultaneously-acquired color infrared photography and suspended solids water samples were used to quantitatively delineate the mixing zone resulting from the discharge of a paper mill effluent. Digital scanning microdensitometer data was used to estimate and delineate suspended solids concentrations on the basis of a semi-empirical model. Photographic photometry, when predicated on a limited amount of ground sampling, can measure and delineate mixing zone waste distributions in more detail then conventional surface measuring techniques. The method has direct application to: (1) the establishment of definite and rational water quality guidelines; (2) the development of sampling and surveillance programs for use by governmental and private agencies; and (3) the development of design and location criteria for industrial and municipal waste effluent outfalls

    Evaluation of the application of ERTS-1 data to the regional land use planning process

    Get PDF
    The author has identified the following significant results. Employing simple and economical extraction methods, ERTS can provide valuable data to the planners at the state or regional level with a frequency never before possible. Interactive computer methods of working directly with ERTS digital information show much promise for providing land use information at a more specific level, since the data format production rate of ERTS justifies improved methods of analysis

    MIT solar wind plasma data from Explorer 33 and Explorer 35: July 1966 to September 1970

    Get PDF
    The plasma experiments on Explorer 33 and Explorer 35 have yielded large amounts of solar wind data. This report gives a brief review of the method used to obtain the data, provides a description of the plasma parameters, and describes in detail the format of the plots and tapes which are available from the Data Center. Hourly average plots of the data are included at the end of the report. From these plots, the availability and interest of the solar wind data for any period of time may be determined

    A broadband THz receiver for low background space applications

    Get PDF
    We have developed a sensitive bolometric receiver for low background space applications. In a 10 percent bandwidth at 1 THz, this receiver is approximately 100 times more sensitive than a quantum limited heterodyne receiver with a 1 GHz IF bandwidth. This receiver is designed to be used for the long wavelength band (200-700 microns) in the MIPS instrument on NASA's SIRTF satellite. The bolometers are cooled to 100 mK by an adiabatic demagnetization refrigerator. Roughly 60 g of cesium chrome alum salt is partially demagnetized to 100 mK, followed by a slow regulated downramp to compensate for the heat leak. The hold time of the ADR system is about 18 hours with a temperature stability of delta T(sub rms) approx. equals 10 micro-K. The composite bolometers have electrical responsivities of 10(exp 9)V/W and electrical NEP's of about 3x10(exp -17) W/square root of Hz. The bolometer signals are read out by JFET preamplifiers located on the helium plate and operated at 120 K. We have addressed a number of space qualification issues, such as the development of an analog magnet controller, construction of a cryogenic shake-table for bolometers and selection of the paramagnetic salt CCA which can survive a bakeout at 50 C. The receiver is scheduled to be flown in the spring of 1992 on a balloon telescope. This flight has a dual purpose. One is to provide realistic test of the capabilities of the new receiver. The other is to search for anisotropies in the cosmic microwave background on scales of a few degrees

    The mechanistic basis for prostacyclin action in pulmonary hypertension

    Get PDF
    Pulmonary arterial hypertension (PAH) is a progressive disease of the small pulmonary arteries in which patients suffer from elevated pulmonary arterial pressure, right ventricular failure and a reduction in gas exchange. Left untreated the median survival from diagnosis is ~2.8 years, though outcome is significantly worse if patients have underlying pulmonary fibrosis or scleroderma. Injury to the endothelium probably initiates the disease process, with increased production of vasoconstrictors (endothelin and thromboxane) and growth factors accompanying the loss of vasodilator and anti-platelet agents, prostacyclin and nitric oxide, which results in vascular remodelling. To date prostacyclin therapy still remains the most efficacious treatment for PAH, although its short half-life and cumbersome delivery (continuous infusion) meant analogues with improved stability and alternative routes of delivery were developed. Classically, prostacyclin agents are thought to produce haemodynamic and anti-proliferative effects through prostacyclin (IP) receptors coupled to cyclic AMP generation, though other prostanoid receptors may contribute (EP2, EP4) or counterbalance (EP1, EP3) these responses. Increasing evidence suggests peroxisome proliferator-activated receptors (PPARs) are also cellular targets for prostacyclin agonists, regulating cell growth, inflammation and apoptosis through these transcription factors. Activation involves ligand binding and/or membrane receptors but probably not cyclic AMP. Here we discuss recent advances in our understanding of PPARs and how they may represent an important therapeutic target in PA

    Coherent microwave backscatter of natural snowpacks

    Get PDF
    The backscatter of natural snowpacks was measured using a swept-frequency system operating from 5.8 to 8.0 GHz. Snow layering produced sequences of maxima and minima in backscatter intensity, with typical peak-to-valley ratios of 15 db. Wetness produced in the upper portion of the snowpack by solar heat input enhanced the effect of layering. The layer response persisted for incidence exhibits predominantly coherent properties. Frequency modulation of the incident signal masked the layer response by averaging the unmodulated response over the bandwidth represented by the modulation. Further changes in backscatter were attributed to changes in wetness in the surface regions of the snowpack; for a fixed frequency of 13.5 GHz and incidence angle of 39 deg, the backscatter decreased typically 15 db between 11 A.M. and noon, and returned to approximately its initial level of overnight

    Interdisciplinary research on the application of ERTS-1 data to the regional land use planning process

    Get PDF
    The author has identified the following significant results. Although the degree to which ERTS-1 imagery can satisfy regional land use planning data needs is not yet known, it appears to offer means by which the data acquisition process can be immeasurably improved. The initial experiences of an interdisciplinary group attempting to formulate ways of analyzing the effectiveness of ERTS-1 imagery as a base for environmental monitoring and the resolution of regional land allocation problems are documented. Application of imagery to the regional planning process consists of utilizing representative geographical regions within the state of Wisconsin. Because of the need to describe and depict regional resource complexity in an interrelatable state, certain resources within the geographical regions have been inventoried and stored in a two-dimensional computer-based map form. Computer oriented processes were developed to provide for the economical storage, analysis, and spatial display of natural and cultural data for regional land use planning purposes. The authors are optimistic that the imagery will provide revelant data for land use decision making at regional levels

    The use of ERTS-1 data for the inventory of critical land resources for regional land use planning

    Get PDF
    Computer-generated spatial and statistical comparisons of critical land resource data derived from conventional sources, RB-57 photographs, and ERTS images, for an eastern Wisconsin test site, suggest that certain critical land resource data can be mapped from ERTS images on a statewide basis. This paper presents one of the biotic resources, wetlands, as an example of the use of ERTS imagery to inventory land resources
    corecore