Multifractal Analysis of Packed Swiss Cheese Cosmologies

The multifractal spectrum of various three-dimensional representations of Packed Swiss Cheese cosmologies in open, closed, and flat spaces are measured, and it is determined that the curvature of the space does not alter the associated fractal structure. These results are compared to observational data and simulated models of large scale galaxy clustering, to assess the viability of the PSC as a candidate for such structure formation. It is found that the PSC dimension spectra do not match those of observation, and possible solutions to this discrepancy are offered, including accounting for potential luminosity biasing effects. Various random and uniform sets are also analyzed to provide insight into the meaning of the multifractal spectrum as it relates to the observed scaling behaviors.Comment: 3 latex files, 18 ps figure

Apollo 17 mission Report. Supplement 6: Calibration results for gamma ray spectrometer sodium iodide crystal

A major difficulty in medium energy gamma-ray remote sensing spectroscopy and astronomy measurements was the high rate of unwanted background resulting from the following major sources: (1) prompt secondary gamma-rays produced by cosmic-ray interactions in satellite materials; (2) direct charged-particle counts; (3) radioactivity induced in the detector materials by cosmic-ray and trapped protons; (4) radioactivity induced in detector materials by the planetary (e.g., earth or moon) albedo neutron flux; (5) radioactivity induced in the detector materials by the interaction of secondary neutrons produced throughout the spacecraft by cosmic-ray and trapped proton interactions; (6) radioactivity induced in spacecraft materials by the mechanisms outlined in 3, 4, and 5; and (7) natural radioactivity in spacecraft and detector materials. The purpose of this experiment was to obtain information on effects 3, 4, and 5, and from this information start developing calculational methods for predicting the background induced in the crystal detector in order to correct the Apollo gamma-ray spectrometer data for this interference

Surface activation of Concorde by Be-7

Activation analysis of two airframe components from the Concorde aircraft has identified the presence of Be-7, a nuclide found by other investigators that was deposited on the forward edge of the Long Duration Exposure Facility (LDEF) structure. The results of the Concorde analysis indicate that this phenomenon is very much a surface effect, and that the areal densities of the Be-7 are comparable to those found for LDEF. The collection of Be-7 by the aircraft must be greater than in the case of LDEF (since duration for which Concorde is accumulating the nuclide is shorter) and is of the order of 1.2 to 41 nuclei/sq cm(-)s(exp -1) depending upon assumptions made regarding the altitude at which collection becomes appreciable, and the efficiency of the process which removes the radionuclide

Gravitational Lensing Characteristics of the Transparent Sun

The transparent Sun is modeled as a spherically symmetric and centrally condensed gravitational lens using recent Standard Solar Model (SSM) data. The Sun's minimum focal length is computed to a refined accuracy of 23.5 +/- 0.1 AU, just beyond the orbit of Uranus. The Sun creates a single image of a distant point source visible to observers inside this minimum focal length and to observers sufficiently removed from the line connecting the source through the Sun's center. Regions of space are mapped where three images of a distant point source are created, along with their associated magnifications. Solar caustics, critical curves, and Einstein rings are computed and discussed. Extremely high gravitational lens magnifications exist for observers situated so that an angularly small, unlensed source appears near a three-image caustic. Types of radiations that might undergo significant solar lens magnifications as they can traverse the core of the Sun, including neutrinos and gravitational radiation, are discussed

Ablation debris control by means of closed thick film filtered water immersion

The performance of laser ablation generated debris control by means of open immersion techniques have been shown to be limited by flow surface ripple effects on the beam and the action of ablation plume pressure loss by splashing of the immersion fluid. To eradicate these issues a closed technique has been developed which ensured a controlled geometry for both the optical interfaces of the flowing liquid film. This had the action of preventing splashing, ensuring repeatable machining conditions and allowed for control of liquid flow velocity. To investigate the performance benefits of this closed immersion technique bisphenol A polycarbonate samples have been machined using filtered water at a number of flow velocities. The results demonstrate the efficacy of the closed immersion technique: a 93% decrease in debris is produced when machining under closed filtered water immersion; the average debris particle size becomes larger, with an equal proportion of small and medium sized debris being produced when laser machining under closed flowing filtered water immersion; large debris is shown to be displaced further by a given flow velocity than smaller debris, showing that the action of flow turbulence in the duct has more impact on smaller debris. Low flow velocities were found to be less effective at controlling the positional trend of deposition of laser ablation generated debris than high flow velocities; but, use of excessive flow velocities resulted in turbulence motivated deposition. This work is of interest to the laser micromachining community and may aide in the manufacture of 2.5D laser etched patterns covering large area wafers and could be applied to a range of wavelengths and laser types

Optimization of the neutron yield in fusion plasmas produced by Coulomb explosions of deuterium clusters irradiated by a petawatt laser

The kinetic energy of hot (multi-keV) ions from the laser-driven Coulomb explosion of deuterium clusters and the resulting fusion yield in plasmas formed from these exploding clusters has been investigated under a variety of conditions using the Texas Petawatt laser. An optimum laser intensity was found for producing neutrons in these cluster fusion plasmas with corresponding average ion energies of 14 keV. The substantial volume (1-10 mm(3)) of the laser-cluster interaction produced by the petawatt peak power laser pulse led to a fusion yield of 1.6x10(7) neutrons in a single shot with a 120 J, 170 fs laser pulse. Possible effects of prepulses are discussed. DOI: 10.1103/PhysRevE.87.023106Glenn Focht Memorial FellowshipNNSA DE-FC52-08NA28512DOE Office of Basic Energy SciencesPhysic

Local Nodes in Global Networks: The Geography of Knowledge Flows in Biotechnology Innovation

The literature on innovation and interactive learning has tended to emphasize the importance of local networks, inter-firm collaboration and knowledge flows as the principal source of technological dynamism. More recently, however, this view has come to be challenged by other perspectives that argue for the importance of non-local knowledge flows. According to this alternative approach, truly dynamic economic regions are characterized both by dense local social interaction and knowledge circulation, as well as strong inter-regional and international connections to outside knowledge sources and partners. This paper offers an empirical examination of these issues by examining the geography of knowledge flows associated with innovation in biotechnology. We begin by reviewing the growing literature on the nature and geography of innovation in biotechnology research and the commercialization process. Then, focusing on the Canadian biotech industry, we examine the determinants of innovation (measured through patenting activity), paying particular attention to internal resources and capabilities of the firm, as well as local and global flows of knowledge and capital. Our study is based on the analysis of Statistics Canada’s 1999 Survey of Biotechnology Use and Development, which covers 358 core biotechnology firms. Our findings highlight the importance of in-house technological capability and absorptive capacity as determinants of successful innovation in biotechnology firms. Furthermore, our results document the precise ways in which knowledge circulates, in both embodied and disembodied forms, both locally and globally. We also highlight the role of formal intellectual property transactions (domestic and international) in promoting knowledge flows. Although we document the importance of global networks in our findings, our results also reveal the value of local networks and specific forms of embedding. Local relational linkages are especially important when raising capital—and the expertise that comes with it—to support innovation. Nevertheless, our empirical results raise some troubling questions about the alleged pre-eminence of the local in fostering innovation