302 research outputs found
In vitro hip testing in the International Society of Biomechanics coordinate system
Many innovative experiments are designed to answ er research questions about hip biomechanics, however many fail to define a coordinate system. This makes comparisons between studies unreliable and is an unnecessary hurdle in extrapolating experimental results to clinical reality. The aim of this study was to present a specimen mounting protocol which aligns and registers hip specimens in the International Society of Biomechanics (ISB) coordinate system, which is defined by bony landmarks that are identified by palpation of the patient’s body. This wou ld enable direct comparison between experimental testing and clinical gait analysis or radiographic studies. To represent the intact hip, four intact synthetic full - pelves with 8 full - length articulating femora were assembled and digitised to define the IS B coordinate system. Using our proposed protocol, pelvis specimens were bisected into left and right hemi - pelves and femora transected at the mid - shaft, and then mounted in bone pots to represent a typical experimental setup. Anatomical landmarks were re - digitised relative to mechanical features of the bone pots and the misalignment was calculated. The mean misalignment was found to be less than 1.5° flexion/extension, ab/adduction and internal/external rotation for both the pelves and femora; this equate s to less than 2.5 % of a normal range of hip motion. The proposed specimen mounting protocol provides a simple method to align in vitro hip specimens in the ISB coordinate system which enables improved comparison between laboratory testing and clinical s tudies. Engineering drawings are provided to allow others to replicate the simple fixtures used in the protocol
Gesinsmoorde - Waar pas die kerk in?
Taking the final report of the HSRC’s exploratory study on family murder as a point of departure, the involvement of clergy and church regarding the phenomenon of family murder is discussed in this article. After highlighting some of the findings of the exploratory study, specific problematic aspects are addressed. The implications of the Christian message of hope to people in the situation of hopelessness, murder and suicide implicit in the phenomenon of family murder, are also evaluated. Likewise, the problematic relationship between the consequences of the gospel and the requirements for mental health is also touched upon. This relationship is looked at from the perspective of certain aspects of the empirical research done in this field. Furthermore, the possible supportive role of the church is stressed: this 'ecology of care’ and the church's message of hope ought to be functional in the situation of hopelessness accompanying family murder. In conclusion, certain preventative actions, in which the church may be instrumental, are pointed out
Fructan biosynthesis in crop plants : the molecular regulation of fructan biosynthesis in chicory (Cichorium intybus L.)
Fructan is a polymer of fructose produced by plants and microorganisms. Within the plant kingdom about 45.000 species accumulate fructan as storage carbohydrate in addition to, or instead of, starch. Fructan accumulating species are mainly found in temperate and sub-tropical regions with seasonal or sporadic rainfall. During the last decades, the use of fructan in the (food) industry has rapidly evolved, because of its health promoting characteristics and interesting functional properties.Chicory (Cichorium intybus L.) is a biennial taproot-bearing crop plant that is grown for the production of inulin on an industrial scale. Inulin, a ß(2,1) linked linear fructan with a terminal glucose residue, is stored in the chicory taproots. The degree of polymerisation (DP) determines the application of the inulin and hence the value of the crop. This leads us to the central question of this thesis: What regulates the fructan yield and the degree of polymerisation, and how can we modify this? The DP is highly dependent on the field conditions and harvest time, and therefore the first step in answering this question was tostudy the regulation of fructan (inulin) metabolism throughout the growing season. This is described in Chapter 2. Metabolic aspects of inulin production and degradation in chicory were monitored in the field and under controlled conditions. We determined the concentrations of soluble carbohydrates, the inulin mean degree of polymerisation (mDP), inulin yield, gene expression and activity of enzymes involved in inulin metabolism in the taproots. Inulin biosynthesis - catalysed by sucrose: sucrose 1-fructosyltransferase (EC 2.4.1.99) (1-SST) and fructan: fructan 1-fructosyltransferase (EC 2.4.1.100) (1-FFT) - started at the onset of taproot development. Inulin yield increased with time following a sigmoid curve reaching a maximum in November. The maximum inulin mDP of 15 was reached in September and then gradually decreased. Based on the changes observed in the pattern of inulin accumulation, we defined three phases in the growing season and analysed product formation, enzyme activity and gene expression in these defined periods. The results were validated by performing experiments under controlled conditions in climate rooms. Our results show that the decrease in 1-SST is not regulated by day length and temperature. From mid-September onwards the mDP decreased gradually although inulin yield still increased. This is most probably the result from back-transfer activity of 1-FFT and fructan exohydrolase activity (EC 3.2.1.153) (1-FEH). In plants 1-FEH catalyses the breakdown of fructan in order to release the stored carbohydrates necessary in periods of stress, like cold or drought periodsor flowering. This information was used to design two strategies to obtain the desired, increased inulin DP and yield. Overexpression of 1-SSTwas performed to increase the mDP and to keep the sucrose concentration low, to prevent 1-FFT from depolymerizing inulin. The result was a higher mDP during the growing season. Unfortunately, no effect on the mDP was seen at the end of the growing season, most probably due to activity of FEH. Secondly, anFEH I antisense fragment was introduced into chicory in order to block depolymerisation at the end of the growing season. This resulted in a reduction in FEH Iexpression upon cold induction, but had only minor effects on the mDP. The degradation of inulin was most probably caused by the remaining 1-FEH activity. Overall this study showed that inulin metabolism in chicory is tightly regulated, but also revealed options to further steer inulin metabolism in chicory. The next step in answering the central question was to study the regulation of the genes involved in fructan biosynthesis. In Chapter 3this was studied at three different levels. Firstly, fructan gene expression and carbohydrate concentrations were studied in axial sections of mature chicory root, revealing the highest expression levels and carbohydrate levels in the phloem. Correlations were found between the gene expression patterns of 1-SST, 1-FFT and the carbohydrate levels, suggesting a possible involvement of sugars in the regulation of 1-SSTand 1-FFTgene expression. Secondly, the induction of 1-SSTand 1-FFTexpression was studied in excised chicory leaves. Expression of both 1-SSTand 1-FFTwas induced upon sucrose and glucose feeding, suggesting that both genes are at least partly regulated in the same way. Upon fructose feeding, the induction of fructan biosynthesis was less pronounced than with sucrose. The expression of 1-SSTwas induced by fructose but this resulted in only low amounts of 1-kestose. The expression of 1-FFTwas not induced upon fructose feeding.Thirdly, to further unravel the mechanism of induction, the promoters of 1-SSTand 1-FFTfrom chicory were isolated and characterized through in silicoand in planta(only 1-FFT) analysis. Computational analysis of fructosyltransferase (FT) promoters revealed elements that are common in fructan biosynthesis-promoters among different species and also occur in Arabidopsis promoter sequences. One of these elements is predominantly present in genes involved in sugar metabolism and transport. This element did also contain a core sequence involved in MYB transcription factor binding important for fructan biosynthesis activation in wheat, as was published recently. An 1100bp 1-FFTpromoter fragment was shown to be functional in transgenic chicory and in the non-fructan accumulating plants species, Arabidopsis and potato. Application of carbohydrates resulted in the expression of the reporter gene GUS comparable to 1-FFTexpression upon carbohydrate feeding in chicory. This study provides information on the regulation of inulin biosynthesis, suggestions for studies on transcription factors, and provides a promoter for steering the expression of fructan biosynthetic genes in transgenic plants. An alternative way for the production of inulin with the desired DP and yield, circumventing the problems in chicory rather than trying to solve them, is the introduction of the fructan biosynthetic pathway in non-fructan metabolizing and catabolizing plant species. Towards this end we have expressed the inulin synthesizing enzymes, 1-SST and 1-FFT from Jerusalem artichoke, in maize and potato, as described inChapter 4. Transgenic maize plants produced inulin type fructan (at 3.2 milligram per gram kernel) and kernel development was not affected. Potato tubers expressing 1-SSTaccumulated 1.8 milligram inulin per gram tuber while tubers with a combined expression of 1-SSTand 1-FFTaccumulated 2.6 milligram inulin per gram tuber. Inulin accumulation in maize kernels was modulated by kernel development, first peaking in young seeds and then decreasing again through degradation during late kernel development. In potato, inulin mDP was relatively stable throughout tuber development and little evidence of degradation was observed. The accumulation of 1-kestose in transgenic maize correlated positively with kernel sucrose concentration and introduction of the fructan biosynthetic pathway in a high-sucrose maize background increased inulin accumulation to 41 milligram per gram kernel kernel. This study shows the importance of sugar availability and the absence of degradation mechanisms in platform crops for tailor-made fructan production. Further evaluation of the production of tailor-made inulin and putative platform crops is discussed in Chapter5.Here we come to the conclusion that the mDP, the distribution and yield depend on the origin of the fructan biosynthesis genes and the availability of sucrose in the host. The combination of genes from different origins could result in new types and different lengths of fructan molecules resulting in (new) specific properties of fructan. Limitations for the production of tailor-made fructan in chicory are not seen in putative new platform crops, such as sugar beet, sugarcane and rice. The work described in this thesis on fructan biosynthesis in chicory and in new platform crops has resulted in new insights that will lead new applied and fundamental research in this field.</p
Additive manufactured push-fit implant fixation with screw-strength pull out
Additive manufacturing offers exciting new possibilities for improving long-term metallic implant fixation in bone through enabling open porous structures for bony ingrowth. The aim of this research was to investigate how the technology could also improve initial fixation, a precursor to successful long-term fixation. A new barbed fixation mechanism, relying on flexible struts was proposed and manufactured as a push-fit peg. The technology was optimized using a synthetic bone model and compared with conventional press-fit peg controls tested over a range of interference fits. Optimum designs, achieving maximum pull-out force, were subsequently tested in a cadaveric femoral condyle model. The barbed fixation surface provided more than double the pull-out force for less than a third of the insertion force compared to the best performing conventional press-fit peg (p < 0.001). Indeed, it provided screw-strength pull out from a push-fit device (1,124 ± 146 N). This step change in implant fixation potential offers new capabilities for low profile, minimally invasive implant design, while providing new options to simplify surgery, allowing for one-piece push-fit components with high levels of initial stability
Predicting hip-knee-ankle and femorotibial angles from knee radiographs with deep learning
BACKGROUND: Knee alignment affects the development and surgical treatment of knee osteoarthritis. Automating femorotibial angle (FTA) and hip-knee-ankle angle (HKA) measurement from radiographs could improve reliability and save time. Further, if HKA could be predicted from knee-only radiographs then radiation exposure could be reduced and the need for specialist equipment and personnel avoided. The aim of this research was to assess if deep learning methods could predict FTA and HKA angle from posteroanterior (PA) knee radiographs. METHODS: Convolutional neural networks with densely connected final layers were trained to analyse PA knee radiographs from the Osteoarthritis Initiative (OAI) database. The FTA dataset with 6149 radiographs and HKA dataset with 2351 radiographs were split into training, validation, and test datasets in a 70:15:15 ratio. Separate models were developed for the prediction of FTA and HKA and their accuracy was quantified using mean squared error as loss function. Heat maps were used to identify the anatomical features within each image that most contributed to the predicted angles. RESULTS: High accuracy was achieved for both FTA (mean absolute error 0.8°) and HKA (mean absolute error 1.7°). Heat maps for both models were concentrated on the knee anatomy and could prove a valuable tool for assessing prediction reliability in clinical application. CONCLUSION: Deep learning techniques enable fast, reliable and accurate predictions of both FTA and HKA from plain knee radiographs and could lead to cost savings for healthcare providers and reduced radiation exposure for patients
Hip capsule biomechanics after arthroplasty - the effect of implant, approach and surgical repair
Aims The hip’s capsular ligaments passively restrain extreme range of movement (ROM) by wrapping around the native femoral head/neck. We determined the effect of hip resurfacing arthroplasty (HRA), dual-mobility total hip arthroplasty (DM-THA), conventional THA, and surgical approach on ligament function. Materials and Methods Eight paired cadaveric hip joints were skeletonized but retained the hip capsule. Capsular ROM restraint during controlled internal rotation (IR) and external rotation (ER) was measured before and after HRA, DM-THA, and conventional THA, with a posterior (right hips) and anterior capsulotomy (left hips). Results Hip resurfacing provided a near-native ROM with between 5° to 17° increase in IR/ER ROM compared with the native hip for the different positions tested, which was a 9% to 33% increase. DM-THA generated a 9° to 61° (18% to 121%) increase in ROM. Conventional THA generated a 52° to 100° (94% to 199%) increase in ROM. Thus, for conventional THA, the capsule function that exerts a limit on ROM is lost. It is restored to some extent by DM-THA, and almost fully restored by hip resurfacing. In positions of low flexion/extension, the posterior capsulotomy provided more normal function than the anterior, possibly because the capsule was shortened during posterior repair. However, in deep flexion positions, the anterior capsulotomy functioned better. Conclusion Native head-size and capsular repair preserves capsular function after arthroplasty. The anterior and posterior approach differentially affect postoperative biomechanical function of the capsular ligaments
The influence of laser parameters and scanning strategies on the mechanical properties of a stochastic porous material
Additive manufacturing enables architectured porous material design, but 3D-CAD modelling of these materials is prohibitively computationally expensive. This bottleneck can be removed using a line-based representation of porous materials instead, with strut thickness controlled by the supplied laser energy. This study investigated how laser energy and scan strategy affects strut thickness and mechanical strength of porous materials. Specimens were manufactured using varying laser parameters, 3 scan strategies (Contour, Points, Pulsing), 2 porous architectures and 2 materials (Titanium, Stainless Steel), with strut thickness, density, modulus, mechanical strength and build time measured. Struts could be built successfully as low as 15° with a minimum diameter of 0.13 mm. Strut thickness was linearly related to the specific enthalpy delivered by the laser to the melt-pool. For a given stiffness, Titanium specimens built at low power/slow speed had a 10% higher strength than those built at high power/fast speed. The opposite was found in Stainless Steel. As specimen stiffness increased, the Contour Strategy produced samples with the highest strength:stiffness and strength:weight ratio. The Points strategy offered the fastest build time, 20% and 100% faster than the Contour and Pulsing strategies, respectively. This work highlights the importance of optimising build parameters to maximize mechanical performance
BABY BOOM target genes provide diverse entry points into cell proliferation and cell growth pathways
Ectopic expression of the Brassica napus BABY BOOM (BBM) AP2/ERF transcription factor is sufficient to induce spontaneous cell proliferation leading primarily to somatic embryogenesis, but also to organogenesis and callus formation. We used DNA microarray analysis in combination with a post-translationally regulated BBM:GR protein and cycloheximide to identify target genes that are directly activated by BBM expression in Arabidopsis seedlings. We show that BBM activated the expression of a largely uncharacterized set of genes encoding proteins with potential roles in transcription, cellular signaling, cell wall biosynthesis and targeted protein turnover. A number of the target genes have been shown to be expressed in meristems or to be involved in cell wall modifications associated with dividing/growing cells. One of the BBM target genes encodes an ADF/cofilin protein, ACTIN DEPOLYMERIZING FACTOR9 (ADF9). The consequences of BBM:GR activation on the actin cytoskeleton were followed using the GFP:FIMBRIN ACTIN BINDING DOMAIN2 (GFP:FABD) actin marker. Dexamethasone-mediated BBM:GR activation induced dramatic changes in actin organization resulting in the formation of dense actin networks with high turnover rates, a phenotype that is consistent with cells that are rapidly undergoing cytoplasmic reorganization. Together the data suggest that the BBM transcription factor activates a complex network of developmental pathways associated with cell proliferation and growth
The effect of nodal connectivity and strut density within stochastic titanium scaffolds on osteogenesis
Modern orthopaedic implants use lattice structures that act as 3D scaffolds to enhance bone growth into and around implants. Stochastic scaffolds are of particular interest as they mimic the architecture of trabecular bone and can combine isotropic properties and adjustable structure. The existing research mainly concentrates on controlling the mechanical and biological performance of periodic lattices by adjusting pore size and shape. Still, less is known on how we can control the performance of stochastic lattices through their design parameters: nodal connectivity, strut density and strut thickness. To elucidate this, four lattice structures were evaluated with varied strut densities and connectivity, hence different local geometry and mechanical properties: low apparent modulus, high apparent modulus, and two with near-identical modulus. Pre-osteoblast murine cells were seeded on scaffolds and cultured in vitro for 28 days. Cell adhesion, proliferation and differentiation were evaluated. Additionally, the expression levels of key osteogenic biomarkers were used to assess the effect of each design parameter on the quality of newly formed tissue. The main finding was that increasing connectivity increased the rate of osteoblast maturation, tissue formation and mineralisation. In detail, doubling the connectivity, over fixed strut density, increased collagen type-I by 140%, increased osteopontin by 130% and osteocalcin by 110%. This was attributed to the increased number of acute angles formed by the numerous connected struts, which facilitated the organization of cells and accelerated the cell cycle. Overall, increasing connectivity and adjusting strut density is a novel technique to design stochastic structures which combine a broad range of biomimetic properties and rapid ossification
A Biostimulant Seed Treatment Improved Heat Stress Tolerance During Cucumber Seed Germination by Acting on the Antioxidant System and Glyoxylate Cycle
- …