Wake control of a 3D bluff body

Bluff bodies are characterized by massive flow separation responsible of most of the pressure drag. Three main contributions roughly determine the total amount of the body drag : 30% is due to the rolling tire, 45% derive from the rear base and 25% comes from the underbody flow and interferences. In the case of large and medium size trucks employed for short and long distance of transportations the fuel consumption can be considerable reduced through the control of the flow separation from the base. The afterbody geometry plays a key role for the drag contributions as showed by Ahmed [1]. Aider et al. [2] used passive vortex generators while piezoelectric vortex generators were investigated by Orazi et al. [3]. Continuous blowing slots as done by Rouméas et al. [4] have been also used on a semi-infinite body. The present investigation considers a simplified 3D car with square-back rear shape. The wake control consist in the injection of continuous jets through four rectangular slots mounted around the perimeter of the rear part. Furthermore, four curved slots are disposed near the wheel to control the flow separation in this region. The flow analysis is performed by means of CFD commercial code (STAR CCM+® by Cd-Adapco). Results of this preliminary investigation will be presented. The effects of the independent rear slots orientation (i) and of the jet velocity (Vi) are analyzed as well as the effects of the jets around the wheels. The study will be also carry out on a physical model that will be tested in a wind tunnel. In figure 1 the expanded model and a portion of the longitudinal section of the rear part of the body are shown

Aeroelastic-structural coupling in antenna prototype for windy open-space

The interaction between wind and an antenna prototype for the low-frequency radio telescope of the Square Kilometer Array (SKA) is experimentally tested in the wind tunnel of the Politecnico di Torino. The tests aim to predict the antenna behaviour during working conditions, i.e. mounted by means of five contact points to a metal grid on sandy ground in the Australian desert. The wind tunnel is characterised by a circular test section having a diameter equal to 3 m and a length equal to 5 m. The height and the distance between the lateral legs of the antenna are equal respectively to 2.2 m and 1.5 m. The tests were performed at increasing wind speed up to 110 km/h. The system under analysis is an aluminium antenna composed by four parts arranged in axial symmetry and each one made of fifteen rods and small plates/wire elements. A numerical parametric model of the system is developed to numerically study the dynamic behaviour of the antenna in the frequency range of interest. The model is able to handle very high modal density and closed spaced modes in multiplicity of four because of the symmetric structure as well as the different shapes of the elements forming the antenna. The wind tunnel results emphasise the fluid-structure coupling of aerodynamics modes and the critical aspects of the boundary conditions for a good prediction of the oscillations amplitudes

Multi-time delay, multi-point Linear Stochastic Estimation of a cavity shear layer velocity from wall-pressure measurements

Multi-time-delay Linear Stochastic Estimation (MTD-LSE) technique is thoroughly described, focusing on its fundamental properties and potentialities. In the multi-time-delay ap- proach, the estimate of the temporal evolution of the velocity at a given location in the flow field is obtained from multiple past samples of the unconditional sources. The technique is applied to estimate the velocity in a cavity shear layer flow, based on wall-pressure measurements from multiple sensor

Separation delay on thick airfoil using multiple synthetic jets

High momentum 2D synthetic jet actuators are tested experimentally focusing the investigation on the separation delay over the airfoil NACA 0024 at high angles of attack. Four slots are present on the suction side of the airfoil. The number of slots in the downstream direction, the position and the width of the active slots and the forcing frequency were varied to investigate on their effects produced. Pressure measurements and wake analysis were performed at Reynolds number equal to 106. A weak influence was observed at low and medium incidences on the lift and drag curves. Considerable increments of the lift coefficient also associated with drag reductions were obtained at high angles of attack according to the values of the forcing frequency and the slots configuration. The influence of the slot width does not highlight great differences on the lift and drag curves. The upstream location of the slots is more effective to delay separation compared with further downstream positioning. Two consecutive active slots were effective as a single one at the same frequency while the estimated comparison at constant momentum could allow better performances. The tests were carried out operating with forcing frequencies near the resonance conditions of the system synthetic jet- cavity-pneumatic line

Trapped vortex cell for aeronautical applications: flow analysis through PIV and Wavelet transform tools

Results of the application of a trapped vortex cell to an airfoil with the aim of improving the aerodynamic performances are presented for two complementary experiments arranged at CIRA and at Politecnico di Torino. In the CIRA experiments, PIV measurements on a simplified configuration were carried out to characterize the trapped vortical structure and its effect on the separating flow downstream of the cell. In the experimental investigation at Politecnico di Torino, static pressure distributions were measured around a complete airfoil model, to yield lift and pitching moment coefficients. Wake surveys were also carried out to measure the drag. To study the unsteady phenomena inside the cavity pressure fluctuations signals were also investigated using Kulite sensors. In both experiments, the angle of attack of the airfoil and the Reynolds number were varied. It is shown that the flow inside the cell is highly unsteady with significant shedding of flow structures downstream. This phenomenon results in a large region of separated flow, in higher drag and lower lift. By contrast, the cell flow is considerably stabilized and regularized by applying distributed suction over the cell wall. As a result, the flow downstream of the cell reattaches and lower drag and larger lift are observed

Trapped vortex cell for aeronautical applications: flow analysis through PIV and Wavelet transform tools.

Abstract Results of the application of a trapped vortex cell to an airfoil with the aim of improving the aerodynamic performances are presented for two complementary experiments arranged at CIRA and at Politecnico di Torino. In the CIRA experiments, PIV measurements on a simplified configuration were carried out to characterize the trapped vortical structure and its effect on the separating flow downstream of the cell. In the experimental investigation at Politecnico di Torino, static pressure distributions were measured around a complete airfoil model, to yield lift and pitching moment coefficients. Wake surveys were also carried out to measure the drag. To study the unsteady phenomena inside the cavity pressure fluctuations signals were also investigated using Kulite sensors. In both experiments, the angle of attack of the airfoil and the Reynolds number were varied. It is shown that the flow inside the cell is highly unsteady with significant shedding of flow structures downstream. This phenomenon results in a large region of separated flow, in higher drag and lower lift. By contrast, the cell flow is considerably stabilized and regularized by applying distributed suction over the cell wall. As a result, the flow downstream of the cell reattaches and lower drag and larger lift are observed

Loss-of-Function Variants in HOPS Complex Genes VPS16 and VPS41 Cause Early Onset Dystonia Associated with Lysosomal Abnormalities.

OBJECTIVES: The majority of people with suspected genetic dystonia remain undiagnosed after maximal investigation, implying that a number of causative genes have not yet been recognized. We aimed to investigate this paucity of diagnoses. METHODS: We undertook weighted burden analysis of whole-exome sequencing (WES) data from 138 individuals with unresolved generalized dystonia of suspected genetic etiology, followed by additional case-finding from international databases, first for the gene implicated by the burden analysis (VPS16), and then for other functionally related genes. Electron microscopy was performed on patient-derived cells. RESULTS: Analysis revealed a significant burden for VPS16 (Fisher's exact test p value, 6.9 × 109 ). VPS16 encodes a subunit of the homotypic fusion and vacuole protein sorting (HOPS) complex, which plays a key role in autophagosome-lysosome fusion. A total of 18 individuals harboring heterozygous loss-of-function VPS16 variants, and one with a microdeletion, were identified. These individuals experienced early onset progressive dystonia with predominant cervical, bulbar, orofacial, and upper limb involvement. Some patients had a more complex phenotype with additional neuropsychiatric and/or developmental comorbidities. We also identified biallelic loss-of-function variants in VPS41, another HOPS-complex encoding gene, in an individual with infantile-onset generalized dystonia. Electron microscopy of patient-derived lymphocytes and fibroblasts from both patients with VPS16 and VPS41 showed vacuolar abnormalities suggestive of impaired lysosomal function. INTERPRETATION: Our study strongly supports a role for HOPS complex dysfunction in the pathogenesis of dystonia, although variants in different subunits display different phenotypic and inheritance characteristics. ANN NEUROL 2020;88:867-877

Absence of the Autophagy Adaptor SQSTM1/p62 Causes Childhood-Onset Neurodegeneration with Ataxia, Dystonia, and Gaze Palsy

Peer reviewe

Study on psychoeducation enhancing results of adherence in patients with schizophrenia (SPERA-S): study protocol for a randomized controlled trial.

BACKGROUND: Poor adherence to pharmacotherapy negatively affects the course and the outcome of schizophreniaspectrum psychoses, enhancing the risk of relapse. Falloon and coworkers developed a Psychoeducation Program aimed at improving communication and problem-solving abilities in patients and their families. This study set out to evaluate changes in adherence to pharmacotherapy in patients diagnosed with schizophrenia-spectrum psychoses, by comparing one group exposed to the Falloon Psychoeducation Program (FPP) with another group exposed to family supportive therapy with generic information on the disorders. METHODS: 340 patients diagnosed with schizophrenia and related disorders according to standardized criteria from 10 participating units distributed throughout the Italian National Health System (NHS), will be enrolled with 1:1 allocation by the method of blocks of randomized permutations. Patients will be reassessed at 6, 12 and 18 months after start of treatment (duration: 6 months).The primary objective is to evaluate changes in adherence to pharmacotherapy after psychoeducation. Adherence will be assessed at three-month intervals by measuring blood levels of the primary prescribed drug using high pressure liquid chromatography, and via the Medication Adherence Questionnaire and a modified version of the Adherence Interview. Secondary objectives are changes in the frequency of relapse and readmission, as the main indicator of the course of the disorder.Enrolled patients will be allocated to the FPP (yes/no) randomly, 1:1, in a procedure controlled by the coordinating unit; codes will be masked until the conclusion of the protocol (or the occurrence of a severe negative event). The raters will be blind to treatment allocation and will be tested for blinding after treatment completion. Intention-to-treat will be applied in considering the primary and secondary outcomes. Multiple imputations will be applied to integrate the missing data. The study started recruitment in February 2013; the total duration of the study is 27 months. DISCUSSION: If the psychoeducation program proves effective in improving adherence to pharmacotherapy and in reducing relapse and readmissions, its application could be proposed as a standard adjunctive psychosocial treatment within the Italian NHS