Performance of MAX-DOAS measurements of aerosols at Tsukuba, Japan: a comparison with lidar and sky radiometer measurements

International audienceGround-based Multi-Axis Differential Optical Absorption Spectroscopy (MAX-DOAS) measurements were performed at Tsukuba, Japan (36.1° N, 140.1° E), in November?December 2006. The measured spectra of scattered sunlight are analyzed by DOAS and optimal estimation methods to retrieve the aerosol optical depth (?) and the vertical profile of the aerosol extinction coefficient (?) at 476 nm in the lower troposphere. We characterize these retrieved quantities through comparisons with coincident lidar and sky radiometer measurements. The retrieved ? values for layers of 0?1 and 1?2 km agree with lidar data to within 30% and 60%, respectively, for most cases, including partly cloudy conditions. Results similar to ? at 0?1 km are obtained for the retrieved ? values, demonstrating that MAX-DOAS provides the new, unique aerosol dataset in the lower troposphere

Technical Note: Determination of formaldehyde mixing ratios in polluted air with PTR-MS: laboratory experiments and field measurements

International audienceFormaldehyde (HCHO), the most abundant carbonyl compound in the atmosphere, is generated as an intermediate product in the oxidation of nonmethane hydrocarbons. Proton transfer reaction mass spectrometry (PTR-MS) has the capability to detect HCHO from ion signals at m/z 31 with high time-resolution. However, the detection sensitivity is low compared to other detectable species, and is considerably affected by humidity, due to back reactions between protonated HCHO and water vapor prior to analysis. We performed a laboratory calibration of HCHO by PTR-MS and examined the detection sensitivity and humidity dependence at various field strengths. Subsequently, we deployed the PTR-MS instrument in a field campaign at Mount Tai in China in June 2006 to measure HCHO in various meteorological and photochemical conditions; we also conducted intercomparison measurements by Multi-Axis Differential Optical Absorption Spectroscopy (MAX-DOAS). Correction of interference in the m/z 31 signals by fragments from proton transfer reactions with methyl hydroperoxide, methanol, and ethanol greatly improves agreement between the two methods, giving the correlation [HCHO]MAX-DOAS = (0.99±0.16) [HCHO]PTR-MS + (0.02±0.38), where error limits represent 95% confidence levels

Precision Measurements of d(d,p)t and d(d,n)^3He Total Cross Sections at Big-Bang Nucleosynthesis Energies

Recent Wilkinson Microwave Anisotropy Probe (WMAP) measurements have determined the baryon density of the Universe $\Omega_b$ with a precision of about 4%. With $\Omega_b$ tightly constrained, comparisons of Big Bang Nucleosynthesis (BBN) abundance predictions to primordial abundance observations can be made and used to test BBN models and/or to further constrain abundances of isotopes with weak observational limits. To push the limits and improve constraints on BBN models, uncertainties in key nuclear reaction rates must be minimized. To this end, we made new precise measurements of the d(d,p)t and d(d,n)^3He total cross sections at lab energies from 110 keV to 650 keV. A complete fit was performed in energy and angle to both angular distribution and normalization data for both reactions simultaneously. By including parameters for experimental variables in the fit, error correlations between detectors, reactions, and reaction energies were accurately tabulated by computational methods. With uncertainties around 2% +/- 1% scale error, these new measurements significantly improve on the existing data set. At relevant temperatures, using the data of the present work, both reaction rates are found to be about 7% higher than those in the widely used Nuclear Astrophysics Compilation of Reaction Rates (NACRE). These data will thus lead not only to reduced uncertainties, but also to modifications in the BBN abundance predictions.Comment: 15 pages, 11 figures, minor editorial change

Improvement of polyuria, bladder sensation and bladder capacity following renal transplantation

The definitive version is available at www.blackwell-synergy.com.ArticleInternational Journal of Urology. 13(5): 616-618 (2006)journal articl

Scaling and exact solutions for the flux creep problem in a slab superconductor

The flux creep problem for a superconductor slab placed in a constant or time-dependent magnetic field is considered. Logarithmic dependence of the activation energy on the current density is assumed, U=U0 ln(J/Jc), with a field dependent Jc. The density B of the magnetic flux penetrating into the superconductor, is shown to obey a scaling law, i.e., the profiles B(x) at different times can be scaled to a function of a single variable. We found exact solution for the scaling function in some specific cases, and an approximate solution for a general case. The scaling also holds for a slab carrying transport current I resulting in a power-law V(I) with exponent p~1. When the flux fronts moving from two sides of the slab collapse at the center, the scaling is broken and p crosses over to U0/kT.Comment: RevTex, 10 pages including 6 figures, submitted to Phys.Rev.

Impact of open crop residual burning on air quality over Central Eastern China during the Mount Tai Experiment 2006 (MTX2006)

The impact of open crop residual burning (OCRB) on O<sub>3</sub>, CO, black carbon (BC) and organic carbon (OC) concentrations over Central Eastern China (CEC; 30–40° N, 111–120° E), during the Mount Tai Experiment in 2006 (MTX2006) was evaluated using a regional chemical transport model, the Models–3 Community Multiscale Air Quality Modeling System (CMAQ). To investigate these pollutants during MTX2006 in June 2006, daily gridded OCRB emissions were developed based on a bottom-up methodology using land cover and hotspot information from satellites. This model system involving daily emissions captured monthly–averages of observed concentrations and day-to-day variations in the patterns of O<sub>3</sub>, CO, BC and OC at the summit of Mount Tai (36° N, 117° E, 1534 m a.s.l., Shandong Province of the People's Republic of China) with high correlation coefficients between the model and observations ranging from 0.55 to 0.69. These results were significantly improved from those using annual biomass burning emissions. For monthly-averaged O<sub>3</sub>, the simulated concentration of 80.8 ppbv was close to the observed concentration (81.3 ppbv). The MTX2006 period was roughly divided into two parts: 1) polluted days with heavy OCRB in the first half of June; and 2) cleaner days with negligible field burning in the latter half of June. Additionally, the first half of June was characterized by two high-pollution episodes during 5–7 and 12–13 June, separated by a relatively cleaner intermediate period during 8–10 June. In the first high-pollution episode, the model captured the high O<sub>3</sub>, CO, BC and OC concentrations at the summit of Mount Tai, which were associated with OCRB over southern CEC and subsequent northward transport. For this episode, the impacts of OCRB emissions on pollutant concentrations were 26% (O<sub>3</sub>), 62% (CO), 79% (BC) and 80% (OC) at the summit of Mount Tai. The daily OCRB emissions were an essential factor in the evaluation of these pollutants during MTX2006. These emissions have a large impact not only on primary pollutants but also on secondary pollutants, such as O<sub>3</sub>, in the first half of June over northeastern Asia. The model reproduced reasonably well the variation of these pollutants in MTX2006, but underestimated daily averages of both CO and BC by a factor of 2, when using emission data from almost solely anthropogenic fuel sources in the latter half of the observation period when field burning can be neglected

Model for the on-site matrix elements of the tight-binding hamiltonian of a strained crystal: Application to silicon, germanium and their alloys

We discuss a model for the on-site matrix elements of the sp3d5s* tight-binding hamiltonian of a strained diamond or zinc-blende crystal or nanostructure. This model features on-site, off-diagonal couplings between the s, p and d orbitals, and is able to reproduce the effects of arbitrary strains on the band energies and effective masses in the full Brillouin zone. It introduces only a few additional parameters and is free from any ambiguities that might arise from the definition of the macroscopic strains as a function of the atomic positions. We apply this model to silicon, germanium and their alloys as an illustration. In particular, we make a detailed comparison of tight-binding and ab initio data on strained Si, Ge and SiGe.Comment: Submitted to Phys. Rev.