12,107 research outputs found
Internal Friction and Vulnerability of Mixed Alkali Glasses
Based on a hopping model we show how the mixed alkali effect in glasses can
be understood if only a small fraction c_V ofthe available sites for the mobile
ions is vacant. In particular, we reproduce the peculiar behavior of the
internal friction and the steep fall (''vulnerability'') of the mobility of the
majority ion upon small replacements by the minority ion. The single and mixed
alkali internal friction peaks are caused by ion-vacancy and ion-ion exchange
processes. If c_V is small, they can become comparable in height even at small
mixing ratios. The large vulnerability is explained by a trapping of vacancies
induced by the minority ions. Reasonable choices of model parameters yield
typical behaviors found in experiments.Comment: 4 pages, 4 figure
Trace element geochemistry of peridotites from the Izu-Bonin-Mariana Forearc, Leg 125
Trace element analyses (first-series transition elements, Ti, Rb, Sr, Zr, Y, Nb, and REE) were carried out on whole rocks and minerals from 10 peridotite samples from both Conical Seamount in the Mariana forearc and Torishima Forearc Seamount in the Izu-Bonin forearc using a combination of XRF, ID-MS, ICP-MS, and ion microprobe. The concentrations of incompatible trace elements are generally low, reflecting the highly residual nature of the peridotites and their low clinopyroxene content (n ratios in the range of 0.05-0.25; several samples show possible small positive Eu anomalies. LREE enrichment is common to both seamounts, although the peridotites from Conical Seamount have higher (La/Ce)n ratios on extended chondrite-normalized plots, in which both REEs and other trace elements are organized according to their incompatibility with respect to a harzburgitic mantle. Comparison with abyssal peridotite patterns suggests that the LREEs, Rb, Nb, Sr, Sm, and Eu are all enriched in the Leg 125 peridotites, but Ti and the HREEs exhibit no obvious enrichment. The peridotites also give positive anomalies for Zr and Sr relative to their neighboring REEs. Covariation diagrams based on clinopyroxene data show that Ti and the HREEs plot on an extension of an abyssal peridotite trend to more residual compositions. However, the LREEs, Rb, Sr, Sm, and Eu are displaced off this trend toward higher values, suggesting that these elements were introduced during an enrichment event. The axis of dispersion on these plots further suggests that enrichment took place during or after melting and thus was not a characteristic of the lithosphere before subduction.
Compared with boninites sampled from the Izu-Bonin-Mariana forearc, the peridotites are significantly more enriched in LREEs. Modeling of the melting process indicates that if they represent the most depleted residues of the melting events that generated forearc boninites they must have experienced subsolidus enrichment in these elements, as well as in Rb, Sr, Zr, Nb, Sm, and Eu. The lack of any correlation with the degree of serpentinization suggests that low-temperature fluids were not the prime cause of enrichment. The enrichment in the high-field-strength elements also suggests that at least some of this enrichment may have involved melts rather than aqueous fluids. Moreover, the presence of the hydrous minerals magnesio-hornblende and tremolite and the common resorption of orthopyroxene indicate that this high-temperature peridotite-fluid interaction may have taken place in a water-rich environment in the forearc following the melting event that produced the boninites. The peridotites from Leg 125 may therefore contain a record of an important flux of elements into the mantle wedge during the initial formation of forearc lithosphere. Ophiolitic peridotites with these characteristics have not yet been reported, perhaps because the precise equivalents to the serpentinite seamounts have not been analyzed
The Invisible Thin Red Line
The aim of this paper is to argue that the adoption of an unrestricted principle of bivalence is compatible with a metaphysics that (i) denies that the future is real, (ii) adopts nomological indeterminism, and (iii) exploits a branching structure to provide a semantics for future contingent claims. To this end, we elaborate what we call Flow Fragmentalism, a view inspired by Kit Fine (2005)’s non-standard tense realism, according to which reality is divided up into maximally coherent collections of tensed facts. In this way, we show how to reconcile a genuinely A-theoretic branching-time model with the idea that there is a branch corresponding to the thin red line, that is, the branch that will turn out to be the actual future history of the world
Electronic structure and light-induced conductivity in a transparent refractory oxide
Combined first-principles and experimental investigations reveal the
underlying mechanism responsible for a drastic change of the conductivity (by
10 orders of magnitude) following hydrogen annealing and UV-irradiation in a
transparent oxide, 12CaO.7Al2O3, found by Hayashi et al. The charge transport
associated with photo-excitation of an electron from H, occurs by electron
hopping. We identify the atoms participating in the hops, determine the exact
paths for the carrier migration, estimate the temperature behavior of the
hopping transport and predict a way to enhance the conductivity by specific
doping.Comment: 4 pages including 4 figure
Recommended from our members
New observational method framework and application
© 2017 19th ICSMGE Secretariat. All rights reserved. This paper introduces the new holistic Observational Method (OM) framework described in Ciria C760 -the new revision to the Embedded Retaining Wall Design Guide. This new OM framework is described by four approaches and these are explained with reference to case histories. Maximum benefit is achieved by back analyzing case histories in similar ground conditions to derive the most probable soil parameters. These parameters can then be used in an ab initio design to maximize saving in the wall thickness, toe embedment, and propping forces. A contingency plan is based on conventional characteristic design parameters and this involves additional propping. The term ipso tempore is introduced to cover wall redesign after construction starts. This may be to achieve saving in propping where movements are smaller than predicted. Alternatively, additional propping or ground treatment may be required and this is consistent with Peck's 'best way out' approach.Ove Arup Lt
Quantifying uncertainty in acoustic measurements of tidal flows using a ‘Virtual’ Doppler Current Profiler
This is the author accepted manuscript. The final version is available from Elsevier via the DOI in this record.Accurate characterisation of flows at tidal sites can enable the developers of tidal stream energy projects to design and model the loads on, and the performance of, tidal energy converters. Acoustic Doppler technology is versatile in the measurement of sea conditions; however, this technology can be limited in its effectiveness at measuring the small-scale kinematic fluctuations caused by waves and turbulence. A Virtual Doppler Current Profiler (VDCP) is used to sample a simulated tidal flow to understand the limitations of this type of measurement instrument whilst recording the small timescale kinematics of waves and turbulence in tidal currents. Results demonstrate the phase dependency of velocity measurements averaged between two acoustic beams and provide a theoretical error for wave and turbulence characteristics sampled under a range of conditions. Spectral moments of the subsurface longitudinal wave orbital velocities recorded by the VDCP can be between 0.1 and 9 times those measured at a point for certain turbulent current conditions, turbulence intensity measurements may vary between 0.2 and 1.5 times the inputted value in low wave conditions and turbulence length scale calculation can also vary hugely dependent on both current and wave conditions. The continuation of this work will enable effective comparison of a linear model for tidal flow kinematics against field measurements from UK tidal site data, and subsequently validate numerical models for the testing of tidal turbines.This work was supported by the Industrial Centre for Offshore Renewable Energy (IDCORE) with funding from the Energy Technologies Institute and the Research Councils Energy Programme [grant number EP/J500847/1] and DNV GL
Nicotine Enemas for Active Crohn's Colitis: An Open Pilot Study
Background. Smoking has a detrimental effect in Crohn's disease (CD), but this may be due to factors in smoking other than nicotine. Given that transdermal nicotine benefits ulcerative colitis (UC), and there is a considerable overlap in the treatment of UC and CD, the possible beneficial effect of nicotine has been examined in patients with Crohn's colitis. Aims. To assess the efficacy and safety of nicotine enemas in active Crohn's colitis. Patients. Thirteen patients with active rectosigmoid CD; 3 patients were excluded because they received antibiotics.
Methods. Subjects were given 6 mg nicotine enemas, each day for 4 weeks, in an open pilot study. At the beginning and end of the trial, a Crohn's disease activity index (CDAI) score was calculated, sigmoidoscopy was performed, and haematological inflammatory markers measured.
Results. Mean CDAI decreased from 202 to 153—the score was reduced in 6 patients, unchanged in 3, and increased in one. Frequency of bowel movements decreased in 8 patients and the sigmoidoscopy grade was reduced in 7. Mean C-reactive protein decreased from 22.0 to 12.3 mg/L. There were no withdrawals due to adverse events.
Conclusions. In this relatively small study of patients with active Crohn's colitis, 6 mg nicotine enemas appeared to be of clinical benefit in most patients. They were well tolerated and safe
Using Fluid Curtains to Improve Sealing Performance in Turbomachinery Applications
The results from an investigation into the physics of how fluid curtains can be applied to improve the aerodynamic performance of conventional turbomachinery shaft and rotor seals are described in this paper. Computational fluid dynamics and testing on two experimental facilities are used in the study. In the first part of the work, computational fluid dynamics simulations validated against experimental test data demonstrate the fundamental mechanism by which the presence of the curtain can act to reduce leakage flow through conventional seals. These results are consolidated into a single performance carpet map, showing how the leakage reduction performance and the curtain supply pressure needed to achieve it vary with changes in values of key geometrical parameters. In the second part of the work the effect of swirl in the seal inlet flow, as is often encountered in turbomachinery applications, on the performance of the fluid curtain is investigated experimentally. Test results show that if the swirl momentum in the inlet flow is greater than the momentum of the curtain flow, the performance benefit from applying the curtain is greatly diminished. Overall, the results provide some fundamental design rules for applying fluid curtains to enhance turbomachinery sealing performance for the general type of leakage path geometry (cylindrical channel, 45-degree jet angle, curtain upstream of a conventional seal) and working fluid type and conditions (air, ambient temperature, subsonic leakage channel flow), used in the study
- …