23 research outputs found
Model for self-consistent analysis of arbitrary MQW structures
Self-consistent computations of the potential profile in complex
semiconductor heterostructures can be successfully applied for comprehensive
simulation of the gain and the absorption spectra, for the analysis of the
capture, escape, tunneling, recombination, and relaxation phenomena and as a
consequence it can be used for studying dynamical behavior of semiconductor
lasers and amplifiers. However, many authors use non-entirely correct ways for
the application of the method. In this paper the versatile model is proposed
for the investigation, optimization, and the control of parameters of the
semiconductor lasers and optical amplifiers which may be employed for the
creation of new generations of the high-density photonic systems for the
information processing and data transfer, follower and security arrangements.
The model is based on the coupled Schredinger, Poisson and drift-diffusion
equations which allow to determine energy quantization levels and wave
functions of charge carriers, take into account built-in fields, and to
investigate doped MQW structures and those under external electric fields
influence. In the paper the methodology of computer realization based on our
model is described. Boundary conditions for each equation and consideration of
the convergence for the method are included. Frequently encountered in practice
approaches and errors of self-consistent computations are described. Domains of
applicability of the main approaches are estimated. Application examples of the
method are given. Some of regularities of the results which were discovered by
using self-consistent method are discussed. Design recommendations for
structure optimization in respect to managing some parameters of AMQW
structures are given.Comment: 12 pages, 2 table, 4 figures, Optics East Symposium, Conference on
Physics and Applications of Optoelectronic Devices, October 25-28, 2004,
Philadelphia, Pennsylvania, US
Semiconductor THz Lasers and Their Applications in Spectroscopy of Explosives
Recently, applications of THz spectroscopy for detecting explosive agents have attracted much attention due to following reasons: many CBRNE agents have fingerprint-like features in the THz wavelength range; the THz spectroscopy provides an ability for remote and non-destructive identification of explosives; the THz radiation penetrates through many covering dielectric materials including paper, leather, fabric and so on. One of the most important components of THz spectroscopy setups is the source of THz radiation, which has to be high-power, tunable, low-cost and to have compact sizes. In this chapter, we are going to overview recent progress of wide variety of THz emitters considered as candidates for that role. We will pay a special attention to recent trends in engineering of spectral characteristics of THz quantum-cascade lasers and their tunability. Also we will describe the advantages and difficulties that accompany a THz spectroscopy of explosives
Femtosecond parabolic pulse shaping in normally dispersive optical fibers
Formation of parabolic pulses at femtosecond time scale by means of passive nonlinear reshaping in normally dispersive optical fibers is analyzed. Two approaches are examined and compared: the parabolic waveform formation in transient propagation regime and parabolic waveform formation in the steady-state propagation regime. It is found that both approaches could produce parabolic pulses as short as few hundred femtoseconds applying commercially available fibers, specially designed all-normal dispersion photonic crystal fiber and modern femtosecond lasers for pumping. The ranges of parameters providing parabolic pulse formation at the femtosecond time scale are found depending on the initial pulse duration, chirp and energy. Applicability of different fibers for femtosecond pulse shaping is analyzed. Recommendation for shortest parabolic pulse formation is made based on the analysis presented
Design of all-normal dispersion microstructured optical fiber on silica platform for generation of pulse‐preserving supercontinuum under excitation at 1550 nm
We investigated numerically the possibility of all normal dispersion fiber design for near-infrared supercontinuum generation based on a standard air-silica microstructure. The design procedure includes finding of target dispersion profile and subsequent finding of appropriate geometrical fiber design by inverse dispersion engineering. It was shown that the tailoring of dispersion profile could increase the spectral width of generated supercontinuum while maintaining perfect spectral flatness. Conditions necessary for wide and flat supercontinuum generation as well as restrictions imposed by chosen materials were discussed. As a result of design and optimization procedure, an air-silica design was found providing normal dispersion up to 3 μm. Simulation results with 10 nJ, 100 fs pulses demonstrate supercontinuum generation up to 1.3 octave; whereas pumping with 30 nJ, 100 fs pulses could provide 1.8 octave supercontinuum
Formation of ultrashort triangular pulses in optical fibers
Specialty shape ultrashort optical pulses, and triangular pulses in particular, are of great interest in optical signal processing. Compact fiber-based techniques for producing the special pulse waveforms from Gaussian or secant pulses delivered by modern ultrafast lasers are in demand in telecommunications. Using the nonlinear Schr¨odinger equation in an extended form the transformation of ultrashort pulses in a fiber towards triangular shape is characterized by the misfit parameter under variety of incident pulse shapes, energies, and chirps. It is shown that short (1-2 m) conventional single mode fiber can be used for triangular pulse formation in the steady-state regime without any pre-chirping if femtosecond pulses are used for pumping. The pulses obtained are stable and demonstrate linear chirp. The ranges and combinations of the pulse parameters found here will serve as a guide for scheduling the experiments and implementation of various all-fiber schemes for optical signal processing
Supercontinuum generation at 800 nm in all-normal dispersion photonic crystal fiber
We have numerically investigated the supercontinuum generation and pulse compression in a specially designed all-normal dispersion photonic crystal fiber with a flat-top dispersion curve, pumped by typical pulses from state of the art Ti:Sapphire lasers at 800 nm. The optimal combination of pump pulse parameters for a given fiber was found, which provides a wide octave-spanning spectrum with superb spectral flatness (a drop in spectral intensity of ~1.7 dB). With regard to the pulse compression for these spectra, multiple-cycle pulses (~8 fs) can be obtained with the use of a simple quadratic compressor and nearly single-cycle pulses (3.3 fs) can be obtained with the application of full phase compensation. The impact of pump pulse wavelength-shifting relative to the top of the dispersion curve on the generated SC and pulse compression was also investigated. The optimal pump pulse wavelength range was found to be 750nm < \u1d706\u1d45d < 850nm, where the distortions of pulse shape are quite small (< -3.3 dB). The influences of realistic fiber fabrication errors on the SC generation and pulse compression were investigated systematically. We propose that the spectral shape distortions generated by fiber fabrication errors can be significantly attenuated by properly manipulating the pump
Advanced lasers: laser physics and technology for applied and fundamental science
Presenting a blend of applied and fundamental research in highly interdisciplinary subjects of rapidly developing areas, this book contains contributions on the frontiers and hot topics of laser physics, laser technology and laser engineering, and covers a wide range of laser topics, from all-optical signal processing and chaotic optical communication to production of superwicking surfaces, correction of extremely high-power beams, and generation of ultrabroadband spectra. It presents both review-type contributions and well researched and documented case studies, and is intended for graduate students, young scientist, and emeritus scientist working/studying in laser physics, optoelectronics, optics, photonics, and adjacent areas. The book contains both experimental and theoretical studies, as well as combinations of these two, which is known to be a most useful and interesting form of reporting scientific results, allowing students to really learn from each contribution. The book contains over 130 illustrations