Boosting the Power Generation in Wind and Hydro Power Production

When approaching a conventional wind turbine, the air flow is slowed down and widened. This results in a loss of turbine efficiency. In order to exploit wind or water flow power as effectively as possible, it was suggested that the turbine should be placed inside a shroud, which consists of 4 wing-shaped surfaces. Two internal air foils improve the turbine performance by speeding up the flow acting on the turbine blades, two external wings create a field of low pressure behind the turbine, thus, helping to draw more mass flow to the turbine and avoid the loss of efficiency due to flow deceleration. The system accumulates kinetic energy of the flow in a small volume where the smaller (and therefore, cheaper) turbine can be installed. A smaller system can be installed inside the bigger one, which would help to accumulate even more kinetic energy on the turbine. This method implies kinetic energy summation with local flow redistribution. Both experiments and CFD simulations demonstrate a significant increase in velocity and generated mechanical power in comparison to those for a bare turbine

Slow positron beam at the JINR, Dubna

The Low Energy Positron Toroidal Accumulator (LEPTA) at the Joint Institute for Nuclear Research (JINR) proposed for generation of positronium in flight has been adopted for positron annihilation spectroscopy (PAS). The positron injector generates continuous slow positron beam with positron energy range between 50 eV and 35 keV. The radioactive 22Na isotope is used. In distinction to popular tungsten foil, here the solid neon is used as moderator. It allows to obtain the beam intensity of about 105 e+/s width energy spectrum characterized by full width at half maximum (FWHM) of 3.4 eV and a tail to lower energies of about 30 eV. The paper covers the characteristic of variable energy positron beam at the LEPTA facility: parameters, the rule of moderation, scheme of injector, and transportation of positrons into the sample chamber. Recent status of the project and its development in the field of PAS is discussed. As an example, the measurement of the positron diffusion length in pure iron is demonstrated

Electron cooling application for luminosity preservation in an experiment with internal targets at COSY

This report is dedicated to investigation of the beam parameter evolution in the experiments with internal target. In calculations of the proton and deuteron beams we concentrated an cluster, atomic beam, storage cell and pellet targets at ANKE experiment mainly. In these calculations electron and stochastic cooling, intrabeam scattering, scattering an the target and residual gas atoms are taken into account. Beam parameter evolution is investigated in the long-term time scale, up to one hour, at different beam energies in the range from 1.0 to 2.7 GeV for proton beam and from 1 to 2.11 GeV for deuteron beam. The results of numerical simulations of the proton and deuteron beam parameters at different energies obtained using new version of BETACOOL program (elaborated at the first stage of this work [1]) are presented. Optimum parameters of the electron cooling system are estimated. The COSY experiment requirements can be satisfied even when electron cooling time is rather long. That allows to apply an electron cooling system with circulating electron beam [2]. Such a system has potentially low cost in comparison with other possibilities. At the energy range from 500 keV to 1.5 MeV only longitudinal magnetic field can provide an effective focusing of an intensive electron beam. The electron beam acceleration can be produced both by induction acceleration of electrons or using an RF electron LINAC. Specific limitations of such a cooling system are discussed. Preliminary design of the electron cooling system with circulating electron beam is described in the report. This report contains also preliminary program of experiments at LEPTA (Low Energy Particle Toroidal accumulator), which are aimed to study the problems of electron cooling system with circulating electron beam. Presently the construction of LEPTA ring is in the final stage at JINR and experiments with circulating beam will be started the next year

Scientific program of DERICA — prospective accelerator and storage ring facility for radioactive ion beam research

Studies of radioactive ions (RIs) are the most thriving field of low-energy nuclear physics. In this paper, the concept and the scientific agenda of the prospective accelerator and storage ring facility for RI beam (RIB) research are proposed for a large-scale international project based at the Flerov Laboratory of Nuclear Reactions of the Joint Institute for Nuclear Research. The motivation for the new facility is discussed and its characteristics are briefly presented and shown to be comparable to those of advanced world centers, the so-called "RIB factories". In the project, the emphasis is made on studies with short-lived RIBs in storage rings. Aunique feature of the project is the possibility of studying electron-RI interactions in a collider experiment to determine the fundamental properties of nuclear matter, in particular, electromagnetic form factors of exotic nuclei

Observation of WWW Production in pp Collisions at √s = 13 TeV with the ATLAS Detector

This Letter reports the observation of W W W production and a measurement of its cross section using 139     fb − 1 of proton-proton collision data recorded at a center-of-mass energy of 13 TeV by the ATLAS detector at the Large Hadron Collider. Events with two same-sign leptons (electrons or muons) and at least two jets, as well as events with three charged leptons, are selected. A multivariate technique is then used to discriminate between signal and background events. Events from W W W production are observed with a significance of 8.0 standard deviations, where the expectation is 5.4 standard deviations. The inclusive W W W production cross section is measured to be 820 ± 100   ( stat ) ± 80   ( syst )     fb , approximately 2.6 standard deviations from the predicted cross section of 511 ± 18     fb calculated at next-to-leading-order QCD and leading-order electroweak accuracy

Observation of WWWWWW Production in pppp Collisions at s\sqrt s =13 TeV with the ATLAS Detector

International audienceThis Letter reports the observation of $WWW$ production and a measurement of its cross section using 139 fb$^{-1}$ of proton-proton collision data recorded at a center-of-mass energy of 13 TeV by the ATLAS detector at the Large Hadron Collider. Events with two same-sign leptons (electrons or muons) and at least two jets, as well as events with three charged leptons, are selected. A multivariate technique is then used to discriminate between signal and background events. Events from $WWW$ production are observed with a significance of 8.0 standard deviations, where the expectation is 5.4 standard deviations. The inclusive $WWW$ production cross section is measured to be $820 \pm 100\,\text{(stat)} \pm 80\,\text{(syst)}$ fb, approximately 2.6 standard deviations from the predicted cross section of $511 \pm 18$ fb calculated at next-to-leading-order QCD and leading-order electroweak accuracy