Geochemical study of the Mesoproterozoic Belt-Purcell Supergroup, western North America : implications for provenance, weathering and diagenesis

Provenance in the lower Belt-Purcell Supergroup is constrained based on geochemical systematics and chemical monazite ages of argillites and sandstones. Rare earth element (REE), Cr-Ni, and Th/Sc-Sc systematics is equivalent for both facies and consistent with a dominantly post-Archean source area. Detrital monazite chemical ages restrict major provenance for the Appekunny and Grinnell sandstones and argillites to Paleoproterozoic terranes at ~1800-1600 Ma, minor contributions at ~1600-1500 Ma, and marginal contributions from Archean terranes at ~2600, likely in Laurentia. Similar detrital age spectra for monazites of argillites and sandstones of the Appekunny Formation are consistent with a common provenance for the two facies. The Belt-Purcell sequence records three major diagenetic stages displayed in argillites and sandstones: (1) K-addition and rare earth element post-Archean upper continental crust (PA-UCC)-like pattern; (2) a stage characterized by heavy REE enrichment relative to light REE and HFSE fractionation, and U and Ce mobility; and (3) local dolomitization with REE and high field strenght elements (HFSE) mobility. REE and HFSE mobility are interpreted as the result of oxidized alkaline brines developed by dissolution of evaporites. Monazites from the Appekunny and Grinnell formations differ compositionally and texturally in two groups. Rounded or inclusions with ages >~1400 Ma, interpreted as detrital, have higher Th2O, Y2O3 and lower LREE/HREE contents than euhedral individual monazite grains with chemical age

Combination of polymeric superplasticizers, water repellents and pozzolanic agents to improve air lime-based grouts for historic masonry repair

This paper presents the experimental procedure to develop air lime-based injection grouts including polymeric superplasticizers, a water repellent agent and pozzolanic agents as additives. Research focuses on the development of grouts to improve various characteristics simultaneously combining different additions and admixtures. Aiming to improve the injectability of the grouts, in this study different polymeric superplasticizers were added, namely polycarboxylated-ether derivative (PCE), polynaphthalene sulfonate (PNS) and condensate of melamine-formaldehyde sulfonate (SMFC). Sodium oleate was also used as a water repellent agent to reduce the water absorption. The enhancement of the strength and setting time was intended by using microsilica and metakaolin as pozzolanic mineral additions. Compatibility between the different admixtures and action mechanism of the different polymers were studied by means of zeta potential and adsorption isotherms measurements. Diverse grout mixtures were produced and investigated assessing their injectability, fluidity, stability, compressive strength, hydrophobicity and durability. This research leads to several suitable mixtures produced by using more than one component to enhance efficiency and to provide better performance of grouts. According to the results, the grout composed of air lime, metakaolin, sodium oleate and PCE was found the most effective composition improving the mechanical strength, injectability and hydrophobicity

Modified bacterial cellulose scaffolds for localized doxorubicin release in human colorectal HT-29 cells

Bacterial cellulose (BC) films modified by the in situ method with the addition of alginate (Alg) during the microbial cultivation of Gluconacetobacter hansenii under static conditions increased the loading of doxorubicin by at least three times. Biophysical analysis of BC-Alg films by scanning electron microscopy, thermogravimetry, X-ray diffraction and FTIR showed a highly homogeneous interpenetrated network scaffold without changes in the BC crystalline structure but with an increased amorphous phase. The main molecular interactions determined by FTIR between both biopolymers clearly suggest high compatibility. These results indicate that alginate plays a key role in the biophysical properties of the hybrid BC matrix. BC-Alg scaffold analysis by nitrogen adsorption isotherms revealed by the Brunauer?Emmett?Teller (BET) method an increase in surface area of about 84% and in pore volume of more than 200%. The Barrett?Joyner?Halenda (BJH) model also showed an increase of about 25% in the pore size compared to the BC film.Loading BC-Alg scaffolds with different amounts of doxorubicin decreased the cell viability of HT-29 human colorectal adenocarcinoma cell line compared to the free Dox from around 95?53% after 24 h and from 63% to 37% after 48 h. Dox kinetic release from the BC-Alg nanocomposite displayed hyperbolic curves related to the different amounts of drug payload and was stable for at least 14 days. The results of the BC-Alg nanocomposites show a promissory potential for anticancer therapies of solid tumors.Centro de Investigación y Desarrollo en Fermentaciones IndustrialesCentro de Química Inorgánic

Modified bacterial cellulose scaffolds for localized doxorubicin release in human colorectal HT-29 cells

Bacterial cellulose (BC) films modified by the in situ method with the addition of alginate (Alg) during the microbial cultivation of Gluconacetobacter hansenii under static conditions increased the loading of doxorubicin by at least three times. Biophysical analysis of BC-Alg films by scanning electron microscopy, thermogravimetry, X-ray diffraction and FTIR showed a highly homogeneous interpenetrated network scaffold without changes in the BC crystalline structure but with an increased amorphous phase. The main molecular interactions determined by FTIR between both biopolymers clearly suggest high compatibility. These results indicate that alginate plays a key role in the biophysical properties of the hybrid BC matrix. BC-Alg scaffold analysis by nitrogen adsorption isotherms revealed by the Brunauer?Emmett?Teller (BET) method an increase in surface area of about 84% and in pore volume of more than 200%. The Barrett?Joyner?Halenda (BJH) model also showed an increase of about 25% in the pore size compared to the BC film.Loading BC-Alg scaffolds with different amounts of doxorubicin decreased the cell viability of HT-29 human colorectal adenocarcinoma cell line compared to the free Dox from around 95?53% after 24 h and from 63% to 37% after 48 h. Dox kinetic release from the BC-Alg nanocomposite displayed hyperbolic curves related to the different amounts of drug payload and was stable for at least 14 days. The results of the BC-Alg nanocomposites show a promissory potential for anticancer therapies of solid tumors.Fil: Cacicedo, Maximiliano Luis. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigación y Desarrollo en Fermentaciones Industriales. Universidad Nacional de la Plata. Facultad de Ciencias Exactas. Centro de Investigación y Desarrollo en Fermentaciones Industriales; ArgentinaFil: Leon, Ignacio Esteban. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Química Inorgánica ; ArgentinaFil: Gonzalez, Jimena Soledad. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Porto, Luismar M.. Universidade Federal de Santa Catarina; BrasilFil: Alvarez, Vera Alejandra. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Castro, Guillermo Raul. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigación y Desarrollo en Fermentaciones Industriales. Universidad Nacional de la Plata. Facultad de Ciencias Exactas. Centro de Investigación y Desarrollo en Fermentaciones Industriales; Argentin

Computer-assisted dental implant placement following free flap reconstruction: virtual planning, CAD/CAM templates, dynamic navigation and augmented reality

Image-guided surgery, prosthetic-based virtual planning, 3D printing, and CAD/CAM technology are changing head and neck ablative and reconstructive surgical oncology. Due to quality-of-life improvement, dental implant rehabilitation could be considered in every patient treated with curative intent. Accurate implant placement is mandatory for prosthesis long-term stability and success in oncologic patients. We present a prospective study, with a novel workflow, comprising 11 patients reconstructed with free flaps and 56 osseointegrated implants placed in bone flaps or remnant jaws (iliac crest, fibula, radial forearm, anterolateral thigh). Starting from CT data and jaw plaster model scanning, virtual dental prosthesis was designed. Then prosthetically driven dental implacement was also virtually planned and transferred to the patient by means of intraoperative infrared optical navigation (first four patients), and a combination of conventional static teeth supported 3D-printed acrylic guide stent, intraoperative dynamic navigation, and augmented reality for final intraoperative verification (last 7 patients). Coronal, apical, and angular deviation between virtual surgical planning and final guided intraoperative position was measured on each implant. There is a clear learning curve for surgeons when applying guided methods. Initial only-navigated cases achieved low accuracy but were comparable to non-guided freehand positioning due to jig registration instability. Subsequent dynamic navigation cases combining highly stable acrylic static guides as reference and registration markers result in the highest accuracy with a 1-1.5-mm deviation at the insertion point. Smartphone-based augmented reality visualization is a valuable tool for intraoperative visualization and final verification, although it is still a difficult technique for guiding surgery. A fixed screw-retained ideal dental prosthesis was achieved in every case as virtually planned. Implant placement, the final step in free flap oncological reconstruction, could be accurately planned and placed with image-guided surgery, 3D printing, and CAD/CAM technology. The learning curve could be overcome with preclinical laboratory training, but virtually designed and 3D-printed tracer registration stability is crucial for accurate and predictable results. Applying these concepts to our difficult oncologic patient subgroup with deep anatomic alterations ended in comparable results as those reported in non-oncologic patients.This work was supported by grant PI18/01625 (Ministerio de Ciencia e Innovación-Instituto de Salud Carlos III and European Regional Development Fund "Una manera de hacer Europa"). This study was also supported by Ticare® implants (Mozo-Grau, Valladolid, Spain). The funder was not involved in the study design, collection, analysis, interpretation of data, the writing of this article or the decision to submit it for publication

Morteros de relleno para restauración de patrimonio cultural, con base cal con adición puzolánica y diversos aditivos

Los morteros de relleno o inyección, especialmente destinados a reparación de cavidades y defectos de albañilería, deben fluir adecuadamente en estado fresco y combinar resistencia y durabilidad. Para conseguir algunas de estas características pueden utilizarse aditivos químicos: superplastificantes, para mejorar la fluidez; adiciones puzolánicas, para conseguir resistencias adecuadas en ambientes con limitado acceso de CO2 y una mejora de la durabilidad; e hidrofugantes, de manera que, sin perjudicar la permeabilidad de estos materiales al vapor de agua, se evite la penetración de agua por capilaridad mejorando la durabilidad. Sin embargo, en la mayor parte de los casos, toda la información disponible se circunscribe al efecto de un único aditivo, sin contemplar el posible efecto conjunto o incluso sinérgico de las combinaciones más interesantes de dos o más aditivos y/o adiciones puzolánicas. El estudio de las sinergias entre estos componentes ofrece posibilidades muy interesantes de avance científico-técnico. Precisamente este es el objetivo del trabajo: diseño de nuevos morteros de inyección de cal que puedan ser utilizados para la restauración del Patrimonio Edificado mediante combinación adecuada de aditivos superplastificantes (éteres de policarboxilato, condensados de naftaleno-formaldehído, sulfonato de melamina y ácido poliacrílico), hidrofugante (oleato sódico) y adiciones minerales puzolánicas (microsílice y metacaolín)

Mechanism of voltage sensing in Ca2+- and voltage-activated K + (BK) channels

In neurosecretion, allosteric communication between voltage sensors and C

Cardiotrophin-1 promotes a high survival rate in rabbits with lethal fulminant hepatitis of viral origin

Rabbit hemorrhagic disease virus (RHDV) causes lethal fulminant hepatitis closely resembling acute liver failure (ALF) in humans. In this study, we investigated whether cardiotrophin-1 (CT-1), a cytokine with hepatoprotective properties, could attenuate liver damage and prolong survival in virus-induced ALF. Twenty-four rabbits were infected with 2 × 10(4) hemagglutination units of RHDV. Twelve received five doses of CT-1 (100 μg/kg) starting at 12 h postinfection (hpi) (the first three doses every 6 h and then two additional doses at 48 and 72 hpi), while the rest received saline. The animals were analyzed for survival, serum biochemistry, and viral load. Another cohort (n = 22) was infected and treated similarly, but animals were sacrificed at 30 and 36 hpi to analyze liver histology, viral load, and the expression of factors implicated in liver damage and repair. All infected rabbits that received saline died by 60 hpi, while 67% of the CT-1-treated animals survived until the end of the study. Treated animals showed improved liver function and histology, while the viral loads were similar. In the livers of CT-1-treated rabbits we observed reduction of oxidative stress, diminished PARP1/2 and JNK activation, and decreased inflammatory reaction, as reflected by reduced expression of tumor necrosis factor alpha, interleukin-1β, Toll-like receptor 4, VCAM-1, and MMP-9. In addition, CT-1-treated rabbits exhibited marked upregulation of TIMP-1 and increased expression of cytoprotective and proregenerative growth factors, including platelet-derived growth factor B, epidermal growth factor, platelet-derived growth factor receptor β, and c-Met. In conclusion, in a lethal form of acute viral hepatitis, CT-1 increases animal survival by attenuating inflammation and activating cytoprotective mechanisms, thus representing a promising therapy for ALF of viral origin

Active photocatalytic-superhydrophobic coating with TiO2-ZnO nano-heterostructures for lime mortars

Nano-heterostructures of TiO2-ZnO (50:50 and 10:90) were obtained by Flame Spray Pyrolisis as photocatalytic agents with expanded sensitivity towards solar light, instead of the restricted UV dependence of the pure TiO2 or ZnO. A superhydrophobic medium was simultaneously prepared and photocatalytic nanoparticles were added to obtain active coatings to be applied onto hardened surfaces of lime rendering and masonry mortars and stones. The coatings were expected to prevent the water absorption of the substrates and the subsequent degradation effects as well as to act as self-cleaning materials, reducing the dirt deposition and the biological colonization. Dispersions were applied onto the surface of lime mortars and siliceous stone. Measurements of the photocatalytic oxidation activity of the coatings were carried out by means of the NO degradation, showing a very good efficiency of the nanoparticles even at long term tests (values of NO oxidation of ca. 35 %). Water contact angle assessment evidenced a strong hydrophobization of the treated surfaces, with WCA values higher than 140°. The results proved the synergistic effect of these coatings with respect to the durability of the treated substrates

Lime-based rendering mortars with photocatalytic and hydrophobic agents: assessment of the water repellency and biocide effect

Different rendering mortars were prepared by mixing air lime and air lime-pozzolanic nanosilica with TiO2 and sodium oleate as, respectively, photocatalytic and water repellent agents, added in bulk. The aim of the work was to design and obtain new rendering mortars with improved durability focusing in the reduction of the water absorption of these materials and in their self-cleaning and biocide effect. To achieve a better distribution of the TiO2 particles, which was expected to enhance their efficiency, different dispersing agents were also incorporated to the fresh mixtures. Four diverse polycarboxylate ethers superplasticizers and a poly-naphthalene-sulfonate were tested. Workability and fluidity of the fresh rendering mortars were determined to guarantee the applicability of the final products. Water contact angle was monitored with the aim of assessing the hydrophobicity of the mortars lent by the water repeller. The biocide effect was studied by means of the culture of a strain of Pseudomonas fluorescens. The colonization of the mortars’ surface was analyzed by determining the number of colonies forming units (CFU) after several days subjecting the samples to suitable T and RH conditions. At the same time, the surface of the mortars was irradiated with solar light to activate the photocatalyst. Results showed the efficiency of the sodium oleate in reducing the water uptake of the rendering mortars. Good compatibility between the water repellent agent, the pozzolanic additive and some of the polycarboxylate superplasticizers was observed. The presence of the photocatalyst was found to be very effective in preventing microbiological colonization