Numerical computations of pressurized liquefied gas releases into the atmosphere

There is great concern about accidental releases and dispersion of toxic and flammable industrial chemicals into the atmosphere. Their toxic effects and/or flammable properties, combined with their widespread use and transport through urban areas, make most industrial chemicals very dangerous. Many industrial chemicals are transported and stored as pressurized liquefied gases in large quantities. The chemical, petrochemical and petroleum industries, as well as regulatory agencies, need realistic dispersion simulations for risk analysis purposes. If accidentally released into the atmosphere, a pressurized liquefied gas suffers a rapid de-pressurisation and as a consequence boils violently. This process is referred to as the flashing process. Complete flashing results in the formation of a two-phase jet with high momentum. Some of the droplets may deposit on the ground and form a pool which gradually evaporates. This thesis presents the development of a Computational Fluid Dynamics (CFD) methodology for studies of pressurized liquefied gas releases into the atmosphere. The methodology is implemented in the CFD model FLACS. The performances of existing source term models in predicting recent experimental observations are assessed. It is found that the energy balance model gives the best predictions for the mass flow rate at the exit orifice. Uncertainties are present in the quality of the predictions for the size distribution of droplets and it is recommended to perform sensitivity studies. Investigation of the dispersion of heavy particles in isotropic turbulent flows by means of the Kinematic Simulation approach allows emphasizing the importance of the inertia and crossing trajectory effects. An Euler-Euler approach based on the assumption of homogeneous flow, namely the Homogeneous Equilibrium Model (HEM), and an Euler-Lagrange approach are implemented in the FLACS CFD model in order to simulate two-phase flows. The two-phase flow models are validated against laboratory scale experiments. Improvements of the current FLACS models for liquid spreading and evaporation on the ground are developed and an algorithm is implemented in order to solve the equations of the pool model on a user-defined uniform grid. Obstructed and non-obstructed large-scale experiments are simulated with the new methodology. The validation of the methodology with both the HEM and the Euler- Lagrange approaches is shown to be relatively successful. Its simplicity of use makes the HEM approach very attractive for industrial applications. The Euler-Lagrange approach has a wider range of physical applications and provides more options to characterize the dispersed phase and its interaction with the continuous phase. This approach should be used when the HEM approach reaches its limitations

CO2pipehaz : quantitative hazard assessment for next generation CO2 pipelines

International audienceThis paper presents an overview of the recently commenced CO(2)PipeHaz project focused on the hazard assessment of CO2 pipelines to be employed as an integral part of the Carbon Capture and Storage (CCS) chain. Funded by the European Commission FP7 Energy programme, the project's objective is to address the fundamentally important and urgent issue regarding the accurate predictions of fluid phase, discharge rate and subsequent atmospheric dispersion during accidental releases from pressurised CO2 pipelines. This information is pivotal to quantifying all the hazard consequences associated with failure of CO2 transportation pipelines forming the basis for emergency response planning and determining minimum safe distances to populated areas. The developments of the state of the art multi-phase heterogeneous discharge and dispersion models for predicting the correct fluid phase during the discharge process will be given special consideration given the very different hazard profiles of CO2 in the gas and solid states. Model validations are based on both small scale controlled laboratory conditions as well as large scale field trials using a unique CCS facility in China, the world's largest CO2 emitter. A cost/benefit analysis will be performed to determine the optimum level of impurities in the captured CO2 stream based on safety and economic considerations. The project will embody the understanding gained within safety and risk assessment tools that can be used for evaluating the adequacy of controls in CO2 pipelines, with best practice guidelines also being developed