experimental investigation of steam condensation in water tank at sub atmospheric pressure

Abstract The International Thermonuclear Experimental Reactor (ITER) Vacuum Vessel Pressure Suppression System (VVPSS) limits the Vacuum Vessel (VV) internal pressure, in case of loss of coolant (LOCA) or other pressurizing accidents from the in-vessel components, to 150 kPa (abs). This is key safety function because a large internal pressure could lead to a breach of the primary confinement barrier. Safety is ensured by discharging the steam evolved during the accident event to the VVPSS suppression tanks where it is condensed. Steam condensation occurs at sub-atmospheric pressure condition. Moreover, being this latter not standard for traditional nuclear systems, this investigation is quite new (not studied in detail before) and deals with an experimental investigation of the direct contact condensation at VVPSS prototypical thermal-hydraulic conditions. To the purpose, a small-scale experimental rig was properly designed and built at Lab. B. Guerrini of DICI-University of Pisa as well as different temperature, pressure and steam mass (flow rate per hole) conditions and sparger patterns have been investigated. The experimental test matrix is also presented in this study. The obtained results show high efficiency of condensation for all examined conditions. The main condensation regimes at sub-atmospheric pressure conditions were identified. In addition, a comparison was done between the condensation regimes experimentally determined and those available in the literature, which were obtained at atmospheric pressure. Finally, results demonstrated to be representative of the real configuration at ITER reactor

Computational fluid dynamics thermal analysis of ITER pressure suppression tanks

The aim of the paper is to present the results of the investigation of the thermal conditions (temperature distribution, heat losses) in the support system of the vapor suppression tank (VST) of the vacuum vessel pressure suppression system (VVPSS), a safety important system of ITER fusion reactor, protecting the vacuum vessel (VV) against overpressures. The VVPSS includes four VSTs of identical volume and installed as two stacked assemblies. The study focuses on the optimization of the design of the thermal insulation at the bottom of the VSTs, interfacing with the basement and also on the identification of the thermal loads at the interface between the tank support and the tank pressure boundary. A computational fluid dynamics (CFD) analysis of the VST has been performed for four different insulation configurations and considering both steady-state and transient loads following accidental conditions. The results of the analysis are used to provide recommendation on the optimum configuration of the thermal insulation. Measures for minimization of the thermal gradient in the critical area of the joint between the tank hemispherical head and support skirt to limit the thermal fatigue on the welds are also suggested

Development of production process of highly active iron powder for friction, antifriction and electrotechnical materials

Translated from Russian (Proceedings of Advanced Materials '99, Inst. of Materials Science Problems, Nat. Acad. of Sciences of Ukraine 1999)Available from British Library Document Supply Centre-DSC:9023.190(10109)T / BLDSC - British Library Document Supply CentreSIGLEGBUnited Kingdo

METHODOLOGY TO INVESTIGATE VIBRATION PHENOMENA CAUSED BY THE STEAM CONDENSATION AT SUB-ATMOSPHERIC CONDITION

The phenomenon of steam-water direct contact condensation (DCC) was widely investigated in the past because of conventional and nuclear engineering applications, like in the safety suppression system of BWRs. When steam is injected into a sub cooled water, different condensation regimes can be observed, such as chugging, condensation oscillation, bubbling condensation oscillation etc. (these have been identified during the experimental campaign on condensation of steam injected into water at sub-atmospheric conditions carried out at Lab. B. Guerrini of DICI- University of Pisa). According to the thermal hydraulic conditions of the condensing jet plume, vibrations may arise. This paper so deals with the analysis of vibration phenomena that originate during the steam-water direct contact condensation at sub-atmospheric conditions, not treated till today. Numerical investigations (by proper FEM code) as well as experimental activity will be presented and discussed in order to evaluate if vibrations are capable to jeopardise this safety suppression system, which is designed to protect Vacuum Vessel of ITER from pressurizing accidents

Magnetic field studies in the ISAC-II cryomodule

The medium beta section of the ISAC-II heavy ion accelerator consists of five cryomodules each containing four quarter wave bulk niobium resonators and one superconducting solenoid. The 9 T solenoid is not shielded but is equipped with bucking coils to reduce the magnetic field in the neighbouring rf cavities. A prototype cryomodule has been designed and assembled at TRIUMF. The cryomodule vacuum space shares the cavity vacuum and contains a mu-metal shield, an LN2 cooled, copper, thermal shield, plus the cold mass and support system. Several cold tests have been done to characterize the cryomodule. Early operating experience with a high field solenoid inside a cryomodule containing SRF cavities will be given. The results include measurements of the passive magnetic field in the cryomodule. We also estimate changes in the magnetic field during the test due to trapped flux in the solenoid. Residual field reduction due to hysteresis cycling of the solenoid has been demonstrated. (c) 2006 Elsevier B.V. All rights reserved

Experimental investigation of steam condensation in water tank at sub-atmospheric pressure

The International Thermonuclear Experimental Reactor (ITER) Vacuum Vessel Pressure Suppression System (VVPSS) limits the Vacuum Vessel (VV) internal pressure, in case of loss of coolant (LOCA) or other pressurizing accidents from the in-vessel components, to 150 kPa (abs). This is key safety function because a large internal pressure could lead to a breach of the primary confinement barrier. Safety is ensured by discharging the steam evolved during the accident event to the VVPSS suppression tanks where it is condensed. Steam condensation occurs at sub-atmospheric pressure condition. Moreover, being this latter not standard for traditional nuclear systems, this investigation is quite new (not studied in detail before) and deals with an experimental investigation of the direct contact condensation at VVPSS prototypical thermal-hydraulic conditions. To the purpose, a small-scale experimental rig was properly designed and built at Lab. B. Guerrini of DICI-University of Pisa as well as different temperature, pressure and steam mass (flow rate per hole) conditions and sparger patterns have been investigated. The experimental test matrix is also presented in this study. The obtained results show high efficiency of condensation for all examined conditions. The main condensation regimes at sub-atmospheric pressure conditions were identified. In addition, a comparison was done between the condensation regimes experimentally determined and those available in the literature, which were obtained at atmospheric pressure. Finally, results demonstrated to be representative of the real configuration at ITER reactor