Small divisor problem in the theory of three-dimensional water gravity waves

We consider doubly-periodic travelling waves at the surface of an infinitely deep perfect fluid, only subjected to gravity $g$ and resulting from the nonlinear interaction of two simply periodic travelling waves making an angle $2\theta$ between them. \newline Denoting by $\mu =gL/c^{2}$ the dimensionless bifurcation parameter ($L$ is the wave length along the direction of the travelling wave and $c$ is the velocity of the wave), bifurcation occurs for $\mu =\cos \theta$. For non-resonant cases, we first give a large family of formal three-dimensional gravity travelling waves, in the form of an expansion in powers of the amplitudes of two basic travelling waves. "Diamond waves" are a particular case of such waves, when they are symmetric with respect to the direction of propagation.\newline \emph{The main object of the paper is the proof of existence} of such symmetric waves having the above mentioned asymptotic expansion. Due to the \emph{occurence of small divisors}, the main difficulty is the inversion of the linearized operator at a non trivial point, for applying the Nash Moser theorem. This operator is the sum of a second order differentiation along a certain direction, and an integro-differential operator of first order, both depending periodically of coordinates. It is shown that for almost all angles $\theta$, the 3-dimensional travelling waves bifurcate for a set of "good" values of the bifurcation parameter having asymptotically a full measure near the bifurcation curve in the parameter plane $(\theta ,\mu ).$Comment: 119

The magnetic connectivity of coronal shocks from behind-the-limb flares to the visible solar surface during γ\gamma-ray events

Context. The observation of >100 MeV {\gamma}-rays in the minutes to hours following solar flares suggests that high-energy particles interacting in the solar atmosphere can be stored and/or accelerated for long time periods. The occasions when {\gamma}-rays are detected even when the solar eruptions occurred beyond the solar limb as viewed from Earth provide favorable viewing conditions for studying the role of coronal shocks driven by coronal mass ejections (CMEs) in the acceleration of these particles. Aims: In this paper, we investigate the spatial and temporal evolution of the coronal shocks inferred from stereoscopic observations of behind-the-limb flares to determine if they could be the source of the particles producing the {\gamma}-rays. Methods: We analyzed the CMEs and early formation of coronal shocks associated with {\gamma}-ray events measured by the Fermi-Large Area Telescope (LAT) from three eruptions behind the solar limb as viewed from Earth on 2013 Oct. 11, 2014 Jan. 06 and Sep. 01. We used a 3D triangulation technique, based on remote-sensing observations to model the expansion of the CME shocks from above the solar surface to the upper corona. Coupling the expansion model to various models of the coronal magnetic field allowed us to derive the time-dependent distribution of shock Mach numbers and the magnetic connection of particles produced by the shock to the solar surface visible from Earth. Results: The reconstructed shock fronts for the three events became magnetically connected to the visible solar surface after the start of the flare and just before the onset of the >100 MeV {\gamma}-ray emission. The shock surface at these connections also exhibited supercritical Mach numbers required for significant particle energization. [...] (Abridged)Comment: 20 pages, 15 figures, version published in A&

Current-driven filamentation upstream of magnetized relativistic collisionless shocks

The physics of instabilities in the precursor of relativistic collisionless shocks is of broad importance in high energy astrophysics, because these instabilities build up the shock, control the particle acceleration process and generate the magnetic fields in which the accelerated particles radiate. Two crucial parameters control the micro-physics of these shocks: the magnetization of the ambient medium and the Lorentz factor of the shock front; as of today, much of this parameter space remains to be explored. In the present paper, we report on a new instability upstream of electron-positron relativistic shocks and we argue that this instability shapes the micro-physics at moderate magnetization levels and/or large Lorentz factors. This instability is seeded by the electric current carried by the accelerated particles in the shock precursor as they gyrate around the background magnetic field. The compensation current induced in the background plasma leads to an unstable configuration, with the appearance of charge neutral filaments carrying a current of the same polarity, oriented along the perpendicular current. This ``current-driven filamentation'' instability grows faster than any other instability studied so far upstream of relativistic shocks, with a growth rate comparable to the plasma frequency. Furthermore, the compensation of the current is associated with a slow-down of the ambient plasma as it penetrates the shock precursor (as viewed in the shock rest frame). This slow-down of the plasma implies that the ``current driven filamentation'' instability can grow for any value of the shock Lorentz factor, provided the magnetization \sigma <~ 10^{-2}. We argue that this instability explains the results of recent particle-in-cell simulations in the mildly magnetized regime.Comment: 14 pages, 8 figures; to appear in MNRA

Investigation of the electromagnetic compatibility of a frequency-controlled electric drive with supercapacitors

In the paper, the electromagnetic compatibility of a frequency converter with a power supply is investigated. Comparison of the variants of the electric drive with conventional capacitors and supercapacitors, which are connected directly to the DC link of the frequency converter, is given. The simulation results in the MATLAB package and the experimental study of the electric drive with using the power quality analyzer are presented. The paper presents the forms of currents and voltages at the input of the frequency converter, as well as their harmonics composition. Conclusions about the influence of the supercapacitor block on the electromagnetic compatibility of electric drive to the mains are made. © 2018 I.V. Plotnikov and I.S. Uimin.17-08-00188I. V. Plotnikov and I. S. Uimin The reported study was funded by RFBR according to the research project № 17-08-0018

On shape optimization for compressible isothermal Navier-Stokes equations

The steady state system of isothermal Navier-Stokes equations is considered in two dimensional domain including an obstacle. The shape optimisation problem of drag minimisation with respect to the admissible shape of the obstacle is defined. The generalized solutions for the Navier-Stokes equations are introduced. The existence of an optimal shape is proved in the class of admissible domains. In general the solution to the problem under consideration is not unique

Statistical analysis of the total magnetic flux decay rate in solar active regions

We used line-of-sight magnetograms acquired by the Helioseismic and Magnetic Imager on board the Solar Dynamics Observatory to derive the decay rate of total unsigned magnetic flux for 910 ephemeral and active regions (ARs) observed between 2010 and 2017. We found that: i) most of the ARs obey the power law dependence between the peak magnetic flux and the magnetic flux decay rate, $DR$, so that $DR\sim \Phi^{0.70}$; ii) larger ARs lose smaller fraction of their magnetic flux per unit of time than the smaller ARs; iii) there exists a cluster of ARs exhibiting significantly lower decay rate than it would follow from the power law and all of them are unipolar sunspots with total fluxes in the narrow range of $(2 - 8) \times 10^{21}$ Mx; iv) a comparison with our previous results shows that the emergence rate is always higher than the decay rate. The emergence rate follows a power law with a shallower slope than the slope of the decay-rate power law. The results allowed us to suggest that not only the maximum total magnetic flux determines the character of the decaying regime of the AR, some of the ARs end up as a slowly decaying unipolar sunspot; there should be certain physical mechanisms to stabilize such a sunspot

An Indirect Method for Determining the Local Heat Transfer Coefficient of Gas Flows in Pipelines

An indirect method and procedure for determining the local heat transfer coefficient in experimental studies on the intensity of heat transfer at a gas–surface interface is described. The article provides an overview of modern approaches and technical devices for determining the heat flux or friction stresses on surfaces in the study of thermophysical processes. The proposed method uses a constant-temperature hot-wire anemometer and a sensor with a thread sensitive element fixed on the surface of a fluoroplastic substrate. A substrate with the sensor’s sensitive element was mounted flush with the wall of the investigated pipeline. This method is based on the Kutateladze–Leontiev approach (the laws of friction and heat transfer) and the hydrodynamic analogy of heat transfer (the Reynolds analogy): this is an assumption about the unity of momentum and heat transfer in a turbulent flow, which establishes a quantitative relationship between friction stresses on the heat exchange surface and heat transfer through this surface. The article presents a method for determining the speed of the developed measuring system. An example of a successful application of the proposed method in relation to the study of thermomechanical processes in the gas exchange systems of reciprocating internal combustion engines is described. © 2022 by the authors.Ministry of Education and Science of the Russian Federation, MinobrnaukaThe research funding from the Ministry of Science and Higher Education of the Russian Federation (Ural Federal University Program of Development within the Priority-2030 Program) is gratefully acknowledged

Investigation of parameters variation of speed controller on the frequency responses in vector automatic control system

The article considers the method of adjusting the frequency converter on preset quality parameters of transients. Regulation is carried out by means of changing the parameters of proportional-integral speed controller at constant performance of closed-loop current controller. Influence of parameters the proportional-integral speed controller on frequency response of vector control system is shown. Results of the simulation and experimental investigations based on the frequency converter Siemens Sinamics S120 are given. Recommendations for adjust settings of closed-loop speed controller of the vector control system at different performance are proposed as a conclusion.В статье рассматривается методика настройки преобразователя частоты на заданные показатели качества переходного процесса. Регулирование происходит за счет изменения параметров пропорционально интегрального регулятора скорости при неизменном быстродействии контура тока. Показано влияние параметров ПИ регулятора скорости на частотные характеристики векторной системы управления и показатели качества переходных процессов. Приводятся результаты моделирования и экспериментальных исследований на базе преобразователя частоты Siemens Sinamics S120. В качестве вывода предложены рекомендации для настройки контура скорости векторных систем управления с различным быстродействием