21 research outputs found
Ion beam effect on Ge-Se chalcogenide glass films: Non-volatile memory array formation, structural changes and device performance
The conductive bridge non-volatile memory technology is an emerging way to
replace traditional charge based memory devices for future neural networks and
configurable logic applications. An array of the memory devices that fulfills
logic operations must be developed for implementing such architectures. A
scheme to fabricate these arrays, using ion bombardment through a mask, has
been suggested and advanced by us. Performance of the memory devices is
studied, based on the formation of vias and damage accumulation due to the
interactions of Ar+ ions with GexSe1-x (x=0.2, 0.3 and 0.4) chalcogenide
glasses as a function of the ion energy and dose dependence. Blanket films and
devices were created to study the structural changes, surface roughness, and
device performance. Raman Spectroscopy, Atomic Force Microscopy (AFM), Energy
Dispersive X-Ray Spectroscopy (EDS) and electrical measurements expound the Ar+
ions behavior on thin films of GexSe1-x system. Raman studies show that there
is a decrease in area ratio between edge-shared to corner-shared structural
units, revealing occurrence of structural reorganization within the system as a
result of ion/film interaction. AFM results demonstrate a tendency in surface
roughness improvement with increased Ge concentration, after ion bombardment.
EDS results reveal a compositional change in the vias, with a clear tendency of
greater interaction between ions and the Ge atoms, as evidenced by greater
compositional changes in the Ge rich films
Fabrication and properties of luminescence polymer composites with erbium/ytterbium oxides and gold nanoparticles
Rare-earth-doped optical materials are important for light sources in
optoelectronics, as well as for efficient optical amplification elements and
other elements of photonics. On the basis of the previously developed method of
anhydrous, low-temperature synthesis of Er/Yb oxides from their chlorides we
fabricated proper nanoparticles with defined parameters and used them for the
development of optically transparent, luminescent polymer nanocomposite with
low optical scattering, suitable for direct, light-induced formation of
photonic elements. Introduction of preformed gold nanoparticles in such a
nanocomposite was also performed and an enhancement of luminescence due to the
influence of plasmon effects was detected
Arsenic trisulfide-doped silica-based porous glass
Novel composite material based on silica porous glass as low refractive index matrix and high refractive index As2S3 nanoparticles filled in the pores has been made. Chalcogenide nanoparticles were dissolved and the porous glass matrix was impregnated in the obtained solution. Subsequently, the solvent was evaporated by annealing the porous glass. Various optical parameters of the created composite material are presented in this paper. These parameters are based on optical and structural transformations which occur under active illumination and heat treatment in such chalcogenide-containing composite and compared with thin As2S3 light-sensitive layers. New functionalities may be added this way to the composite, such as illumination and/or thermally driven optical parameters. Developing and optimizing the optical properties of the obtained As2S3-porous glass composites can be useful for creating 3D optical-structural patterns for different applications such as holographic data storage, light modulation, and/or functional, nonlinear optical elements with various parameters for VIS-NIR optics
Influence of gold nanoparticles in polymer nanocomposite on space-temporal-irradiation dependent diffraction grating recording
L
A generalized exponential relationship between the surface-enhanced Raman scattering (SERS) efficiency of gold/silver nanoisland arrangements and their non-dimensional interparticle distance/particle diameter ratio
L
Investigation of the performance of thermally generated Au/Ag nanoislands for SERS and LSPR applications
In this work the performance of Au/Ag nanoislands was investigated for Surface Enhanced Raman Spectroscopy (SERS) and Localized Surface Plasmon Resonance (LSPR) applications. The nanoislands were generated by thermally annealing thin layers of silver and gold (having thickness in the 5-15 nm range), which were previously sputtered onto glass surfaces. Both pure (silver and gold nanoparticles – AuNP and AgNP) and composite metallic systems (silver-gold core-shell structures – Ag-Au core-shell) were evaluated based on their plasmonic and SERS sensitivity. Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM) were used to measure the size, shape and distribution of the nanoparticles to correlate them with the obtained plasmonic/Raman capabilities. The technological parameters of nanoisland fabrication for optimal sensitivities are presented
Investigation of the performance of thermally generated gold nanoislands for LSPR and SERS applications
Influence of gold nanoparticles on the photo-polymerization processes and structure in acrylate nanocomposites
Photolithography-Free Ge–Se Based Memristive Arrays: Materials Characterization and Device Testing
The focus of this work is on the formation of a lithography-free redox conductive bridge memristor array, comprised of different compositions of GexSe1−x chalcogenide glasses with the aim of selecting the chalcogenide material that provides the best performance. Various memristive arrays were fabricated on a metal–chalcogenide–metal stack. This structure offers high device density with the simplest configuration and allows access to each nano redox conductive bridge device. It was found that the device stability and threshold voltage were a function of the chalcogenide glass composition, with the Ge-rich film contributing to the best device performance, which is attributed to the formation of rigid structure and the availability of Ge–Ge bonds. Additionally, these parameters were dependent on the thickness and the surface roughness of the chalcogenide glass. Application of a nonlithography method for fabricating the array structure offered excellent yield, stable ON–OFF states and good uniformity. This demonstration, along with success achieved at the single cell level, suggests that the redox conductive bridge memristor is well positioned for ultrahigh performance memory and logic applications