16,208 research outputs found

    The disappearance of viscous and laminar wakes in complex flows

    Get PDF
    The singular effects of steady large-scale external strain on the viscous wake generated by a rigid body and the overall flow field are analysed. In an accelerating flow strained at a positive rate, the vorticity field is annihilated owing to positive and negative vorticity either side of the wake centreline diffusing into one another and the volume flux in the wake decreases with downwind distance. Since the wake disappears, the far-field flow changes from monopolar to dipolar. In this case, the force on the body is no longer proportional to the strength of the monopole, but is proportional to the strength of the far field dipole. These results are extended to the case of strained turbulent wakes and this is verified against experimental wind tunnel measurements of Keffer (1965) and Elliott & Townsend (1981) for positive and negative strains. The analysis demonstrates why the total force acting on a body may be estimated by adding the viscous drag and inviscid force due to the irrotational straining field. Applying the analysis to the wake region of a rigid body or a bubble shows that the wake volume flux decreases even in uniform flows owing to the local straining flow in the near-wake region. While the wake volume flux decreases by a small amount for the flow over streamline and bluff bodies, for the case of a clean bubble the decrease is so large as to render Betz's (1925) drag formula invalid. To show how these results may be applied to complex flows, the effects of a sequence of positive and negative strains on the wake are considered. The average wake width is much larger than in the absence of a strain field and this leads to diffusion of vorticity between wakes and the cancellation of vorticity. The latter mechanism leads to a net reduction in the volume flux deficit downstream which explains why in calculations of the flow through groups of moving or stationary bodies the wakes of upstream bodies may be ignored even though their drag and lift forces have a significant effect on the overall flow field

    The disappearance of laminar and turbulent wakes in complex flows

    Get PDF
    The singular effects of steady large-scale external strain on the viscous wake generated by a rigid body and the overall flow field are analysed. In an accelerating flow strained at a positive rate, the vorticity field is annihilated owing to positive and negative vorticity either side of the wake centreline diffusing into one another and the volume flux in the wake decreases with downwind distance. Since the wake disappears, the far-field flow changes from monopolar to dipolar. In this case, the force on the body is no longer proportional to the strength of the monopole, but is proportional to the strength of the far field dipole. These results are extended to the case of strained turbulent wakes and this is verified against experimental wind tunnel measurements of Keffer (1965) and Elliott & Townsend (1981) for positive and negative strains. The analysis demonstrates why the total force acting on a body may be estimated by adding the viscous drag and inviscid force due to the irrotational straining field.Applying the analysis to the wake region of a rigid body or a bubble shows that the wake volume flux decreases even in uniform flows owing to the local straining flow in the near-wake region. While the wake volume flux decreases by a small amount for the flow over streamline and bluff bodies, for the case of a clean bubble the decrease is so large as to render Betz's (1925) drag formula invalid.To show how these results may be applied to complex flows, the effects of a sequence of positive and negative strains on the wake are considered. The average wake width is much larger than in the absence of a strain field and this leads to diffusion of vorticity between wakes and the cancellation of vorticity. The latter mechanism leads to a net reduction in the volume flux deficit downstream which explains why in calculations of the flow through groups of moving or stationary bodies the wakes of upstream bodies may be ignored even though their drag and lift forces have a significant effect on the overall flow field

    Do men consult less than women? An analysis of routinely collected UK general practice data

    Get PDF
    <p>Objective To examine whether gender differences in primary care consultation rates (1) vary by age and deprivation status and (2) diminish when consultation for reproductive reasons or common underlying morbidities are accounted for.</p> <p>Design Cross-sectional study of a cohort of patients registered with general practice.</p> <p>Setting UK primary care.</p> <p>Subjects Patients (1 869 149 men and 1 916 898 women) registered with 446 eligible practices in 2010.</p> <p>Primary outcome measures Primary care consultation rate.</p> <p>Results This study analyses routinely collected primary care consultation data. The crude consultation rate was 32% lower in men than women. The magnitude of gender difference varied across the life course, and there was no ‘excess’ female consulting in early and later life. The greatest gender gap in primary care consultations was seen among those aged between 16 and 60 years. Gender differences in consulting were higher in people from more deprived areas than among those from more affluent areas. Accounting for reproductive-related consultations diminished but did not eradicate the gender gap. However, consultation rates in men and women who had comparable underlying morbidities (as assessed by receipt of medication) were similar; men in receipt of antidepressant medication were only 8% less likely to consult than women in receipt of antidepressant medication (relative risk (RR) 0.916, 95% CI 0.913 to 0.918), and men in receipt of medication to treat cardiovascular disease were just 5% less likely to consult (RR=0.950, 95% CI 0.948 to 0.952) than women receiving similar medication. These small gender differences diminished further, particularly for depression (RR=0.950, 95% CI 0.947 to 0.953), after also taking account of reproductive consultations.</p> <p>Conclusions Overall gender differences in consulting are most marked between the ages of 16 and 60 years; these differences are only partially accounted for by consultations for reproductive reasons. Differences in consultation rates between men and women were largely eradicated when comparing men and women in receipt of medication for similar underlying morbidities.</p&gt

    Modelling OECD Industrial Energy Demand: Asymmetric Price Responses and Energy – Saving Technical Change

    Get PDF
    The industrial sector embodies a multifaceted production process consequently modelling the ‘derived demand’ for energy is a complex issue; made all the more difficult by the need to capture the effect of technical progress of the capital stock. This paper is an exercise in econometric modelling of industrial energy demand using panel data for 15 OECD countries over the period 1962 – 2003 exploring the issue of energy-saving technical change and asymmetric price responses. Although difficult to determine precisely, it is tentatively concluded that the preferred specification for OECD industrial energy demand incorporates asymmetric price responses but not exogenous energysaving technical change.OECD Industrial energy demand; Asymmetry; Energy-saving technical change; Modelling

    Individual and corporate sources of motivation - A preliminary investigation

    Get PDF
    Rating scales of individual and corporate motivations and factor analysis of result

    The Democratization of U.S. Research and Development after 1980

    Get PDF
    Using Compustat data, we document that prior to 1980, large R&D per-forming firms had higher R&D intensity (R&D/Sales) than small firms in the same industries. Over the course of the next two decades, in these same in-dustries, small firms came to rival and even surpass large firms in terms of R&D intensity. During this period, corporate R&D intensity nearly doubled and most of the aggregate increase is due to the substantial increase in R&D intensity among small firms. Little of the change in composition is explained by changes in the industrial distribution of R&D. Why did small firms increase their R&D after 1980 and not before? We argue that, after 1980, small firms were able to compete on better terms in industries already dominated by large firms. We show that the patterns we observe in the data are consistent with a straightforward dynamic model of R&D with falling barriers to entry. But what barriers fell? We argue the shift in R&D intensity by small firms was largely due to the electronics revolution. Prior to the 1980s, a large corporate sales and clerical force was an essential factor for the rapid and widespread distribution of new products. This technology clearly favored large, established firms. But the electronics revolution obviated the need for these factors, making entry easier.R&D, barriers to entry, innovation

    Performance of LI-1542 reusable surface insulation system in a hypersonic stream

    Get PDF
    The thermal and structural performance LI-1542 reusable surface insulation (RSI) tiles was investigated. The test panel was designed to represent part of the surface structure on a space shuttle orbiter fuselage along a 1250 K isotherm. Aerothermal tests were conducted at a free-stream Mach number of 6.6, a total temperature of 1820 K, Reynolds numbers of 2 millon and 5 million per meter, and dynamic pressures of 26 and 65 kPa. The RSI tiles demonstrated good thermal protection and structural integrity. High temperatures were caused by misalinement in tile height, offset the tile longitudinal alinement, and leakage around thermal seals when differential pressure existed across the panel. The damage tolerance of LI-1542 RSI appeared high. The tile coating crazed early in the test program, but this did not effect the tile integrity. Erosion of the tile edges occurred at forward-facing steps and at the ends of longitudinal gaps because of particle impacts and flow shear

    Dynamic balance training with sensory electrical stimulation in chronic stroke patients

    Get PDF
    A case study investigating the impact of sensory electrical stimulation during perturbed stance in one chronic stroke patient is presented. A special apparatus called the BalanceTrainer was used. It allows the application of perturbations to neurologically impaired people during standing, while protecting the subject from falling. The subject underwent two different periods of perturbation training, each lasting ten days. During the first period the subject was perturbed in eight different directions. During the second period the subject was also perturbed, but was assisted by sensory electrical stimulation of the soleus, tibialis anterior, tensor fascia latae, and vastus muscles in the impaired leg. After each period of training an assessment was carried out to measure the forces the subject applied on the ground via two force plates. The subject improved his ability to balance throughout the training, with the largest improvements during the final period when electrical stimulation was used

    Displacement of inviscid fluid by a sphere moving away from a wall

    Get PDF
    We develop a theoretical analysis of the displacement of inviscid fluid particles and material surfaces caused by the unsteady flow around a solid body that is moving away from a wall. The body starts at position hs from the wall, and the material surface is initially parallel to the wall and at distance hL from it. A volume of fluid Df+ is displaced away from the wall and a volume Df- towards the wall. Df+ and Df- are found to be sensitive to the ratio hL/hs. The results of our specific calculations for a sphere can be extended in general to other shapes of bodies. When the sphere moves perpendicular to the wall the fluid displacement and drift volume Df+ are calculated numerically by computing the flow around the sphere. These numerical results are compared with analytical expressions calculated by approximating the flow around the sphere as a dipole moving away from the wall. The two methods agree well because displacement is an integrated effect of the fluid flow and the largest contribution to displacement is produced when the sphere is more than two radii away from the wall, i.e. when the dipole approximation adequately describes the flow. Analytic expressions for fluid displacement are used to calculate Df+ when the sphere moves at an acute angle α away from the wall. In general the presence of the wall reduces the volume displaced forward and this effect is still significant when the sphere starts 100 radii from the wall. A sphere travelling perpendicular to the wall, α = 0, displaces forward a volume Df+(0) = 4πa3hL/33/2hS when the marked surface starts downstream, or behind the sphere, and displaces a volume Df+(0) [similar] 2πa3/3 forward when it is marked upstream or in front of the body. A sphere travelling at an acute angle away from the wall displaces a volume Df+(α) [similar] Df+(0) cos α forward when the surface starts downstream of the sphere. When the marked surface is initially upstream of the sphere, there are two separate regions displaced forward and a simple cosine dependence on α is not found. These results can all be generalized to calculate material surfaces when the sphere moves at variable speed, displacements no longer being expressed in terms of time, but in relation to the distance travelled by the sphere
    corecore