859 research outputs found

    Increasing the Durability of Piezoelectric Impact-based Micro Wind Generator in Real Application

    Get PDF
    AbstractThe purpose of this study is to increase the durability of piezoelectric impact-based micro wind generator (PIMWG) in real application. Using new PIMWG design, numerical simulation, and experimental comparison analysis, we improved the durability of PIMWGs in real application. The experimental results show that the optimized PIMWG generated 2.4 mW (RMS value), and it did not crack within 40h. In this study, we improved the durability of PIMWGs for real application

    Akt1-Inhibitor of DNA binding2 is essential for growth cone formation and axon growth and promotes central nervous system axon regeneration.

    Get PDF
    Mechanistic studies of axon growth during development are beneficial to the search for neuron-intrinsic regulators of axon regeneration. Here, we discovered that, in the developing neuron from rat, Akt signaling regulates axon growth and growth cone formation through phosphorylation of serine 14 (S14) on Inhibitor of DNA binding 2 (Id2). This enhances Id2 protein stability by means of escape from proteasomal degradation, and steers its localization to the growth cone, where Id2 interacts with radixin that is critical for growth cone formation. Knockdown of Id2, or abrogation of Id2 phosphorylation at S14, greatly impairs axon growth and the architecture of growth cone. Intriguingly, reinstatement of Akt/Id2 signaling after injury in mouse hippocampal slices redeemed growth promoting ability, leading to obvious axon regeneration. Our results suggest that Akt/Id2 signaling is a key module for growth cone formation and axon growth, and its augmentation plays a potential role in CNS axonal regeneration

    Sex- and Age-Related Changes in Connexin 43 Expression in Normal Rat Bladder

    Get PDF
    Purpose Gap junctions are intercellular channels to facilitate electrical and metabolic communication between adjacent cells. Connexin 43 is the most predominant type of connexin expressed on rat detrusor muscle cells. We investigated the connexin 43 expressions in various age groups of either sex in normal rats. Methods Eighty Sprague-Dawley rats were used for analysis. Each group was quantified by 8 rats at 1 week, 2 weeks, 1 month, 3 months, and 6 months of age in either sex. In each animal, bladder was removed without any kind of intervention and fresh-frozen in liquid nitrogen. Total RNA extraction was done with easy-BLUE total RNA extraction kit. Reverse transcription polymerase chain reaction was done for connexin 43 and glyceraldehyde-3-phosphate dehydrogenase as an internal control using ImProm-II Reverse Transcription System. Results In female rats, no age-related change was detected in connexin 43 expressions. In male rats, connexin expression at 3 months of age showed significant decrease compared with 1 week, 2 weeks, and 6 months of age (P<0.05). When connexin expression at the same age in male and female were compared, only 3 months group in male showed significant decrease than the same age group in female. Conclusions Our data suggest that the expressions of connexin 43 mRNA in normal detrusor muscle cell showed age-related changes especially in male rats. Although it is difficult to interpret these findings at this stage, age should be considered as a possible compounding factor affecting connexin 43 expressions in male rats

    Mechanical Properties and Durability of Latex-Modified Fiber-Reinforced Concrete: A Tunnel Liner Application

    Get PDF
    This study assessed the mechanical properties and durability of latex-modified fiber-reinforced segment concrete (polyolefin-based macrosynthetic fibers and hybrid fiber-macrosynthetic fiber and polypropylene fiber) for a tunnel liner application. The tested macrosynthetic fiber-reinforced concrete has a better strength than steel fiber-reinforced concrete. The tested concrete with blast furnace slag has a higher chloride ion penetration resistance (less permeable), but its compressive and flexural strengths can be reduced with blast furnace slag content increase. Also, the hybrid fiber-reinforced concrete has higher compressive strength, flexural strength, chloride ion water permeability resistance, impact resistance, and abrasion resistance than the macrosynthetic fiber-reinforced concrete. The modified fiber improved the performance of concrete, and the hybrid fiber was found to control the formation of micro- and macrocracks more effectively. Therefore, overall performance of the hybrid fiber-reinforced concrete was found superior to the other fiber-reinforced concrete mixes tested for this study. The test results also indicated that macrosynthetic fiber could replace the steel fiber as a concrete reinforcement

    Effects of Chung-Pae Inhalation Therapy on a Mouse Model of Chronic Obstructive Pulmonary Disease

    Get PDF
    Chung-pae (CP) inhalation therapy is a method frequently used in Korea to treat lung disease, especially chronic obstructive pulmonary disease (COPD). This study investigated the effects of CP inhalation on a COPD animal model. C57BL/6 mice received porcine pancreatic elastase (PPE) and lipopolysaccharide (LPS) alternately three times for 3 weeks to induce COPD. Then, CP (5 or 20 mg/kg) was administered every 2 h after the final LPS administration. The effect of CP was evaluated by bronchoalveolar lavage (BAL) fluid analysis, histological analysis of lung tissue, and reverse transcription polymerase chain reaction analysis of mRNA of interleukin- (IL-) 1β, tumor necrosis factor- (TNF-) α, IL-6, and tumor growth factor- (TGF-) β. Intratracheal CP administration reduced the number of leukocytes and neutrophils in BAL fluid, inhibited the histological appearance of lung damage, and decreased the mRNA levels of the proinflammatory cytokines IL-1β, TNF-α, IL-6, and TGF-β. Intratracheal CP administration effectively decreased the chronic inflammation and pathological changes in a PPE- and LPS-induced COPD mouse model. Therefore, we suggest that CP is a promising strategy for COPD

    Impact of Body Mass Index on the relationship of epicardial adipose tissue to metabolic syndrome and coronary artery disease in an Asian population

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>In a previous study, we demonstrated that the thickness of epicardial adipose tissue (EAT), measured by echocardiography, was increased in patients with metabolic syndrome (MS) and coronary artery disease (CAD). Several studies on obese patients, however, failed to demonstrate any relationship between EAT and CAD. We hypothesized that body mass index (BMI) affected the link between EAT and MS and CAD.</p> <p>Methods</p> <p>We consecutively enrolled 643 patients (302 males, 341 females; 59 ± 11 years), who underwent echocardiography and coronary angiography. The EAT thickness was measured on the free wall of the right ventricle at the end of diastole. All patients were divided into two groups: high BMI group, ≥27 kg/m<sup>2 </sup>(n = 165), and non-high BMI group, < 27 kg/m<sup>2 </sup>(n = 478).</p> <p>Results</p> <p>The median and mean EAT thickness of 643 patients were 3.0 mm and 3.1 ± 2.4 mm, respectively. In the non-high BMI group, the median EAT thickness was significantly increased in patients with MS compared to those without MS (3.5 vs. 1.9 mm, p < 0.001). In the high BMI group, however, there was no significant difference in the median EAT thickness between patients with and without MS (3.0 vs. 2.5 mm, p = 0.813). A receiver operating characteristic (ROC) curve analysis predicting MS revealed that the area under the curve (AUC) of the non-high BMI group was significantly larger than that of the high BMI group (0.659 vs. 0.506, p = 0.007). When compared to patients without CAD, patients with CAD in both the non-high and high BMI groups had a significantly higher median EAT thickness (3.5 vs. 1.5 mm, p < 0.001 and 4.0 vs. 2.5 mm, p = 0.001, respectively). However, an ROC curve analysis predicting CAD revealed that the AUC of the non-high BMI group tended to be larger than that of the high BMI group (0.735 vs. 0.657, p = 0.055).</p> <p>Conclusions</p> <p>While EAT thickness was significantly increased in patients with MS and CAD, the power of EAT thickness to predict MS and CAD was stronger in patients with BMI < 27 kg/m<sup>2</sup>. These findings showed that the measurement of EAT thickness by echocardiography might be especially useful in an Asian population with a non-high BMI, less than 27 kg/m<sup>2</sup>.</p

    A complication of subclavian venous catheterization: extravascular kinking, knotting, and entrapment of the guidewire -A case report-

    Get PDF
    Various complications of central venous catheterization have been reported, some of which are well-known, while others are described as a sporadic events. We experienced a case of left subclavian venous catheterization complicated by extravascular knotting, kinking, and entrapment of the guidewire and the guidewire was removed surgically. Although minimal resistance was encountered during guidewire insertion, the guidewire was advanced approximately 30 cm. Physicians should be aware of these rare potential complications when a guidewire is advanced if any resistance is encountered

    A plausible method of preparing the ideal p-n junction interface of a thermoelectric material by surface doping

    Full text link
    Recent advances in two-dimensional (2D) crystals make it possible to realize an ideal interface structure that is required for device applications. Specifically, a p-n junction made of 2D crystals is predicted to exhibit an atomically well-defined interface that will lead to high device performance. Using angle-resolved photoemission spectroscopy, a simple surface treatment was shown to allow the possible formation of such an interface. Ta adsorption on the surface of a p-doped SnSe shifts the valence band maximum towards higher binding energy due to the charge transfer from Ta to SnSe that is highly localized at the surface due to the layered structure of SnSe. As a result, the charge carriers of the surface are changed from holes of its bulk characteristics to electrons, while the bulk remains as a p-type semiconductor. This observation suggests that the well-defined interface of a p-n junction with an atomically thin {\it n}-region is formed between Ta-adsorbed surface and bulk.Comment: 4 figure
    • …
    corecore