Protein A-conjugated iron oxide nanoparticles for separation of Vibrio cholerae from water samples.

Pathogen separation is of great significance for precise detection and prevention of disease outbreaks. For the first time, protein A conjugated with chitosan-coated iron oxide nanoparticles was prepared for pathogen separation at low concentrations from liquid samples. Vibrio cholerae O1 (VO1) bacteria were used for testing the effectiveness of this conjugate. Transmission electron microscopy (TEM) was used to confirm the presence of captured VO1. The results showed that, after binding with a specific antibody, the conjugate allows separation of VO1 bacteria from water samples at a concentration as low as 10 cfu mL(-1). Moreover, the conjugate can be used in parallel with conventional or modern diagnostic tests for quick and accurate detection of pathogens

Mortality patterns in Vietnam, 2006: Findings from a national verbal autopsy survey

<p>Abstract</p> <p>Background</p> <p>Accurate nationally representative statistics on total and cause-specific mortality in Vietnam are lacking due to incomplete capture in government reporting systems. This paper presents total and cause-specific mortality results from a national verbal autopsy survey conducted first time in Vietnam in conjunction with the annual population change survey and discusses methodological and logistical challenges associated with the implementation of a nation-wide assessment of mortality based on surveys.</p> <p>Verbal autopsy interviews, using the WHO standard questionnaire, were conducted with close relatives of the 6798 deaths identified in the 2007 population change survey in Vietnam. Data collectors were health staff recruited from the commune health station who undertook 3-day intensive training on VA interview. The Preston-Coale method assessed the level of completeness of mortality reporting from the population change survey. The number of deaths in each age-sex grouping is inflated according to the estimate of completeness to produce an <it>adjusted </it>number of deaths. Underlying causes of death were aggregated to the International Classification of Diseases Mortality Tabulation List 1. Leading causes of death were tabulated by sex for three broad age groups: 0-14 years; 15-59 years; and 60 years and above.</p> <p>Findings</p> <p>Completeness of mortality reporting was 69% for males and 54% for females with substantial regional variation. The use of VA has resulted in 10% of deaths being classified to ill-defined among males, and 15% among females. More ill-defined deaths were reported among the 60 year or above age group. Incomplete death reporting, wide geographical dispersal of deaths, extensive travel between households, and substantial variation in local responses to VA interviews challenged the implementation of a national mortality and cause of death assessment based on surveys.</p> <p>Conclusions</p> <p>Verbal autopsy can be a viable tool to identify cause of death in Vietnam. However logistical challenges limit its use in conjunction with the national sample survey. Sentinel population clusters for mortality surveillance should be tested to develop an effective and sustainable option for routine mortality and cause of death data collection in Vietnam.</p

Verbal autopsy completion rate and factors associated with undetermined cause of death in a rural resource-poor setting of Tanzania

UNLABELLED\ud \ud ABSTRACT:\ud \ud BACKGROUND\ud \ud Verbal autopsy (VA) is a widely used tool to assign probable cause of death in areas with inadequate vital registration systems. Its uses in priority setting and health planning are well documented in sub-Saharan Africa (SSA) and Asia. However, there is a lack of data related to VA processing and completion rates in assigning causes of death in a community. There is also a lack of data on factors associated with undetermined causes of death documented in SSA. There is a need for such information for understanding the gaps in VA processing and better estimating disease burden.\ud \ud OBJECTIVE\ud \ud The study's intent was to determine the completion rate of VA and factors associated with assigning undetermined causes of death in rural Tanzania.\ud \ud METHODS\ud \ud A database of deaths reported from the Ifakara Health and Demographic Surveillance System from 2002 to 2007 was used. Completion rates were determined at the following stages of processing: 1) death identified; 2) VA interviews conducted; 3) VA forms submitted to physicians; 4) coding and assigning of cause of death. Logistic regression was used to determine factors associated with deaths coded as "undetermined."\ud \ud RESULTS\ud \ud The completion rate of VA after identification of death and the VA interview ranged from 83% in 2002 and 89% in 2007. Ninety-four percent of deaths submitted to physicians were assigned a specific cause, with 31% of the causes coded as undetermined. Neonates and child deaths that occurred outside health facilities were associated with a high rate of undetermined classification (33%, odds ratio [OR] = 1.33, 95% confidence interval [CI] (1.05, 1.67), p = 0.016). Respondents reporting high education levels were less likely to be associated with deaths that were classified as undetermined (24%, OR = 0.76, 95% CI (0.60, -0.96), p = 0.023). Being a child of the deceased compared to a partner (husband or wife) was more likely to be associated with undetermined cause of death classification (OR = 1.35, 95% CI (1.04, 1.75), p = 0.023).\ud \ud CONCLUSION\ud \ud Every year, there is a high completion rate of VA in the initial stages of processing; however, a number of VAs are lost during the processing. Most of the losses occur at the final step, physicians' determination of cause of death. The type of respondent and place of death had a significant effect on final determination of the plausible cause of death. The finding provides some insight into the factors affecting full coverage of verbal autopsy diagnosis and the limitations of causes of death based on VA in SSA. Although physician review is the most commonly used method in ascertaining probable cause of death, we suggest further work needs to be done to address the challenges faced by physicians in interpreting VA forms. There is need for an alternative to or improvement of the methods of physician review

Pharmacists’ Perspectives on the Use of Telepharmacy in Response to COVID-19 Pandemic in Ho Chi Minh City, Vietnam

Introduction: Telepharmacy, the application of information and communication technologies in healthcare services, has been adopted in many countries to provide patients with pharmaceutical care. However, it has yet to be widely used in Vietnam. This study was conducted to assess the current status of use and the factors associated with the willingness to use telepharmacy of pharmacists in Vietnam. Methods: A descriptive cross-sectional study was conducted from February to July 2021; 414 pharmacists were recruited to fill in an online survey. Results: Overall, 86.7% of participants have used telepharmacy application and 87.2% of them were willing to apply telepharmacy in pharmacy practice. According to our multivariate analysis, the level of readiness was associated with positive attitude (odds ratio [OR] = 4.67; 95% confidence interval [CI]: 2.26-9.66), and a good behavior (OR = 11.34; 95% CI: 3.84-33.45). Discussion: Developing a telepharmacy system with appropriate features is essential to meet the requirements of pharmacy practice amid the spread of the COVID-19 pandemic

Neonatal mortality: an invisible and marginalised trauma

Neonatal mortality is a major health problem in low and middle income countries and the rate of improvement of newborn survival is slow. This article is a review of the PhD thesis by Mats Målqvist, titled ‘Who can save the unseen – Studies on neonatal mortality in Quang Ninh province, Vietnam,’ from Uppsala University. The thesis aims to investigate structural barriers to newborn health improvements and determinants of neonatal death. The findings reveal a severe under-reporting of neonatal deaths in the official health statistics in Quang Ninh province in northern Vietnam. The neonatal mortality rate (NMR) found was four times higher than what was reported to the Ministry of Health. This underestimation of the problem inhibits adequate interventions and efforts to improve the survival of newborns and highlights the invisibility of this vulnerable group

Dual-selective hydrogen and ethanol sensor for steam reforming systems

The use of micro- and nano-sensors is nowadays becoming more important in order to monitor several aspects of human life and environment. Controlled production of metal oxides nanostructures for gas-sensing applications is therefore crucial to integrate nanosensors to most systems, as they are ideal materials for such utilization. Here, nickel oxide (NiO) polycrystalline nanowires were grown and used to realize sensors that can selectively detect hydrogen and ethanol gas. NiO semiconducting nanowires with polycrystalline structure were grown through an easy, cheap and scalable hydrothermal procedure. Morphology and crystal structure of the NiO nanowires were investigated by energy-dispersive X-ray spectroscopy, scanning electron microscopy, X-ray diffraction, and transmission electron microscopy. The NiO nanostructures were then tested as gas sensors showing very good performance in terms of sensor response (107% for hydrogen, 136% for ethanol), stability, response and recovery times (20 s for hydrogen, 35 for ethanol). Their tunable dual-selectivity to hydrogen and ethanol make them ideal for use in ethanol steam-reforming systems.(C) 2016 Elsevier B.V. All rights reserved

ZnO Nanowires-C Microfiber Hybrid Nanosensor for Liquefied Petroleum Gas Detection

Zinc oxide nanowires are integrated onto carbon microfibers using a two-step approach which includes electrochemical deposition of zinc and its thermal oxidation. Such nano-on-micro hybrid architecture is then used as resistive gas sensor. Some properties like mechanical flexibility, low cost and large-area fabrication make this design appealing for different applications. The huge surface-to-volume ratio of such structure comes from being structured at both microscale and nanoscale (ZnO nanowires and C microfiber) and leads to a strong and rapid response/recovery times when it is used as a gas sensor. The fabrication process of the ZnO-mu C device is very simple and doesn't involve any expensive lithographic step. The sensors show excellent liquefied petroleum gas sensing properties, with very fast response on gas exposure (about 3 s) and very good reversibility (less than 2%). In addition, the carbon microfiber substrate allows the use of the ZnO-mu C sensor also in applications where flexibility is required (for example integrated in fabric)