872 research outputs found
Identification of Bacitracin Produced by Local Isolate of Bacillus licheniformis
Bacillus licheniformis was isolated from soil of different house gardens. Diagnosis was performed according to Gram stain, motility, shape forming, aerobic condition and other tests. Bacitracin was primary identified after its activity was tested against some species of Gram positive and Gram negative bacteria. Identification was completed by using thin layer chromatographic technique
Serum Levels of Selenium, Zinc, Copper and Magnesium in Asthmatic Patients: a Case Control Study.
Background: Free radicals have harmful effects on cells and tissues and are thought to be responsible for the pathogenesis of many diseases including bronchial asthma. Selenium (Se), Zinc (Zn), copper (Cu), and magnesium (Mg) are trace elements
required for the antioxidant enzymes and hence the optimal functions of the immune system. Changes in the levels of these elements may lead to a reduction in antioxidant activities in asthma.
Objective: This study was conducted to determine serum levels of the trace elements Se, Zn, Cu, and Mg in asthmatic patients in order to evaluate the associations of these nutrients
with asthma in adults
Subjects and Methods: Serum Se, Zn, Cu, and Mg concentrations were measured in 100 asthmatic adult patients and 170 healthy control subjects matched for age and sex. The patients were recruited from asthma casualties, referred clinics and wards of Elshaab and Omdurman Teaching Hospital, Khartoum Sudan. Socio- demographic data and clinical history of all subjects were collected in questionnaires.
Results: Serum Se and Cu levels were found to be significantly decreased in asthmatic patients compared to controls. Mean serum Se and Cu for patients were 65.8 5.5Ig/l (mean SD) and 0.711 0.37g/l respectively while that for controls were 78.2 7.5 Ig/l and 0.939 0.322g/l respectively (P value was < 0.001). On the other hand the mean serum Zn level was significantly higher in patients compared to controls (1.2 0.51g/l and 0.94 0.254g/l respectively) (P value wa
Adaptive receiver for visible light communication system
The future of visible light communication (VLC) systems relies on achieving moderate to high data rates and the ability to design a low complexity system, as these will play a major role in the next generation communication networks. In this paper, we propose, design, and evaluate the use of an adaptive receiver to mitigate the inter-symbol interference (ISI) and improve the overall VLC system performance while using a single element wide field of view (FOV) photodetector. In addition, we optimise the adaptive receiver by employing a different number of buffers to find the optimum configurations in terms of reducing the complexity and achieving the best performance. The proposed adaptive receiver is able to provide data rates of 1 Gbps with a BER of 10¯⁵ for OOK modulation in the worst case scenario
Optimization of industrial production of rifamycin B by Amycolatopsis mediterranei. IV. Production in the fermentor
Optimization of the physical and physiological parameters of the fermentation process using the gene amplified variant of Amycolatopsis mediterranei (NCH) was carried out. Optimization of the physical parameters by controlling the pH at 6.5 for 3 days then at 7 thereafter and by adjustment of aeration at 1 vvm for 3 days then controlling the dissolved oxygen (DO) at 30% saturation increased the yield from 9.77 to 11.96 (22%) and 13.39 g/l (37%), respectively. Replacing 12% glucose in the fermentation medium (F2m1) with 5% glucose syrup (F2m3 medium) resulted in a drop of the yield from 9.77 to 7.5 g/l, while further addition of another 5% glucose syrup at day 4 increased the yield from 7.5 to 13.81 g/l (84%); with a further increase in the yield to 14.25 g/l (90%) upon controlling DO. Whereas, the combined addition of 0.1% yeast extract at day 2 to F2m3 medium along with the addition 5% glucose syrup at day 4 increased the yield from 7.5 to 15.35 g/l (105%); with a further increase in the yield to 16.3 g/l (117%) upon controlling DO. The fed-batch addition of both 3% soytone at day 3 and 5% of glucose syrup at day 4 to F2m3 medium increased the yield from 7.5 to 16.2 g/l (116%) and by extending the fermentation period to 10 days the yield reached 17.9 g/l (139%). Upon applying all optimum physical and physiological conditions in the fermentor the yield increased from 7.5 to 17.43 g/l in 8 days (132%) and by extending the fermentation period to 10 days the yield reached 19.4 g/l (159%). Further process optimization by examination and analysis of the kinetics of the process would most certainly further increase the yield and quantitatively define the process to a level that could be tested on a pilot scale.
Key Words: Rifamycin B, fermentor, biotechnology, Amycolatopsis mediterranei, optimization, fed-batch and process development
African Journal of Biotechnology Vol.3(9) 2004: 432-44
Optimization of industrial production of rifamycin B by Amycolatopsis mediterranei. I. The role of colony morphology and nitrogen sources in productivity
A systematic approach to process optimization for production of rifamycin B was applied to a strain of Amycolatopsis mediterranei. Examination of the growth revealed 6 different morphologically distinct colonies on Bennett's agar medium. Rifamycin B production in shake flasks by the six different colony types ranged between 0.5 and 1.2 g/l. There was a clear correlation between the colony morphology and rifamycin B productivity. The highest yield of rifamycin B (1.03-1.2 g/l) was obtained by using the orange-red colored colonies, rosette shaped, devoid of hollow center and 2-3 mm in diameter. Variability in colony morphology, however, remained and the appropriate colonies had to be picked up for preparing the inoculum of each experiment. Addition of yeast extract to the fermentation medium at different times increased rifamycin B production. The highest antibiotic production was obtained upon the addition of 0.1% yeast extract after 2 days of incubation, where the yield increased from 1.15 to 1.95 g/l (70%). The use of 1.8% KNO3 in the fermentation medium, instead of 0.96% (NH4)2SO4, markedly increased rifamycin B production from 1.15 to 2.92 g/l (154%). It was also observed, upon microscopical examination, that KNO3 decreased branching and fragmentation of the mycelia in the fermentation medium.
Keywords: Rifamycin B; fermentation; biotechnology; Amycolatopsis mediterranei; strain selection.
African Journal of Biotechnology Vol.3(5) 2004: 266-27
Optimization of industrial production of rifamycin B by Amycolatopsis mediterranei. II. The role of gene amplification and physiological factors in productivity in shake flasks
Amplification of gene expression of the most productive colony type of Amycolatopsis mediterranei strain N1 under stress of chloramphenicol, resulted in isolation of a variant NCH with productivity of 2.56 g/l compared to 1.15 g/l by the parent strain N1 (2.2 fold increase). This amplified variant has a further advantage of reduced variation in colony morphology with predominance of the most productive colony type. Using variant NCH, modification of the fermentation medium F1 by the addition of 0.1% yeast extract or the use of 1.8% KNO3 resulted in 3.8 and 5.8-fold increase in productivity, respectively, compared to strain N1. When the F1 medium was replaced by a new medium F2 containing soytone, instead of the particulate constituents (peanut meal and soybean meal) the yield by variant NCH reached 7.85 g/l (6.8-fold increase). Modification of the F2 medium by addition of glycerol or the replacement of glucose by glucose syrup decreased rifamycin B production. Changing the concentration of soytone increased the yield only slightly while replacing it with peptone or tryptone or the addition of 1 % corn steep liquor failed to increase the yield. On the other hand, the addition of 0.1 % yeast extract, or the replacement of 0.6% (NH4)2SO4 by 1.2% KNO3 or 0.4% NH4NO3, to F2 medium led to 8.2, 10.2 and 10.4-fold increase in productivity, respectively, compared to productivity of strain N1 in F1 medium. The change in the concentrations of either MgSO4 or CaCO3, the use of different types of antifoams and the use of higher concentrations of sodium diethyl barbiturate did not significantly influence the yield. These collective optimization attempts thus resulted in a 10.4-fold increase in productivity, from 1.15 to 11.99 g/l.
Key words: Rifamycin B, fermentation, biotechnology, Amycolatopsis mediterranei, optimization, gene amplification, physiological factors.
African Journal of Biotechnology Vol.3(5) 2004: 273-28
Optimization of industrial production of rifamycin B by Amycolatopsis mediterranei. III. Production in fed-batch mode in shake flasks
Optimization of the fermentation process using the gene amplified variant of Amycolatopsis mediterranei, NCH, in the fermentation medium F2 was carried out by the application of fed-batch regime. The addition of 12% glucose alone at day 4 or simultaneously with 0.1% yeast extract at day 2 led to an increase in the yield of rifamycin B by 46% and 57%, respectively. The application of fed-batch regime together with replacing (NH4)2SO4 with the better yielding inorganic nitrogen sources NH4NO3 or KNO3 (F2m1 and F2m2 media, respectively) increased the production of rifamycin B. The use of F2m1 medium alone or with an additional 12% glucose added at day 4 increased the yield by 53% and 120%, respectively. However, further addition of 0.1% yeast extract led to an increase in the yield by only 63%. The addition of 3% soytone or 0.05% NH4NO3 to F2m1 at day 3 increased the yield by 72% and 61%, respectively, compared to productivity in F2 medium. The use of F2m2 medium increased the yield by 50%. The addition of 12% glucose at day 4 or of 0.1% yeast extract at day 2 to F2m2 medium led to an increase in the yield by 119 and 55%, respectively, compared to F2 medium. However, when both 12% glucose and 0.1% yeast extract were added at similar scheduled times only 64% increase in the yield occurred. By applying the three most effective optimization regimes determined using variant NCH with F2m2 medium on a standard rifamycin B producing strain, Nocardia mediterranei ATCC 21789, a similar pattern of increase in the antibiotic yield was observed. Thus, the use of F2m2 instead of F2 medium either alone or with an additional 12% glucose added at day 4 increased the yield by 36 and 75%, respectively, whereas the addition of 0.1% yeast extract to F2 medium increased the yield by 15%. In conclusion, the application of fed-batch technique with the optimum modifications of the medium constituents increased rifamycin B production by variant NCH to a maximum of 17.17 g/l compared to a yield of 5.3 g/l by the tested standard strain under the same conditions. The increase in rifamycin B production using the standard strain confirms the usefulness of the tested medium modifications in the improvement of rifamycin B production and its possible application in fermentations using other rifamycin B producer strains and also shows the superiority of variant NCH as a producer, when compared to the standard strain.
Key words: Rifamycin B, fermentation, biotechnology, Amycolatopsis mediterranei, optimization, fed-batch and physiological factors.
African Journal of Biotechnology Vol.3(8) 2004: 387-39
Angiogenic output in viral hepatitis, C and B, and HCV-associated hepatocellular carcinoma
Introduction: Angiogenesis is known to play a pivotal role in most of malignancy, including HCC, and in chronic inflammation.Aim: To investigate the angiogenic output in HCV and HBV infection and its implication in the development of HCV associated HCC.Materials and methods: Blood samples were collected and grouped as; HS healthy subjects control group; HCC–HCV; chronic HCV infected patient group (HCV+ve) who are positive for serum anti-HCV antibodies and HCV–RNA; anti-HCV antibody positive and HCV–RNA negative patient group (HCVve); patients with positive HBsAg and HBV-DNA group (HBV+ve); and HBsAg positive and HBV-DNA negative patient group (HBVve). Serum levels of vascular endothelial growth factor, angiopoietin-2, endostatin and angiostatin were assessed in different studied groups.Results: The level of sVEGF was insignificantly elevated in both HCV+ve and HCVve groups when compared with controls, while Ang-2, sES and sAS were significantly elevated in both groups as compared with healthy controls. The studied parameters were significantly elevated in HBV-+ve patients when compared with the control. However, HBVve patients showed significantly elevated levels in sAng-2, sES and sAS when compared with the control while the level of sVEGF was equal to that of controls. In patients with HCC, the studied parameters showed a significant elevation when compared with healthy controls and patients either with HBV or HCV infection except for sAS in the case of HCV-+ve patients and VEGF for HBV-+ve patients who were also higher but not significant.Conclusion: The increased hepatic angiogenesis in chronic HCV and HBV could provide the molecular basis for liver carcinogenesis and contribute to the increased risk of HCC in patients with cirrhosis due to HCV and/or HBV.KEYWORDS Angiogenesis; HCC; HCV; HB
Climatic factors interference with the occurrence of Beauveria bassiana and Metarhizium anisopliae in cultivated soil
Description of method and recommendation of laboratory and field procedures for the isolation of soil borne entomopathogenic fungi (specifically Beauveria bassiana and Metarhizium anisopliae) is presented. Baiting technique method was used for screening of occurrence of indigenous populations of entomopathogenic fungi. Totally, 2068 alive greater wax moth larvae (Galleria mellonella L.) were used to trap entomopathogenic fungi present in the soil. Site selected was the experimental farm of Assiut University; only 105 larvae were infected by entomopathogenic fungi representing 5.08% mortality. B. bassiana caused 85.71% of the mortality represented by 90 isolates. M. anisopliae caused 14.29% of the mortality giving only 15 isolates of M. anisopliae. Data showed that B. bassiana seems to be the most economically important entomopathogenic fungi inhabiting soil cultivated with wheat and cotton plants. The highest number of the isolates was recorded during spring and autumn seasons. The relationship between the incidence of B. bassiana and M. anisopliae and the selected weather factors was statistically analyzed using multiple regression analysis.Key words: Entomopathogenic fungi, Galleria mellonella, baiting technique, soil
Escaping the Ashby limit for mechanical damping/stiffness trade-off using a constrained high internal friction interfacial layer.
The development of new materials with reduced noise and vibration levels is an active area of research due to concerns in various aspects of environmental noise pollution and its effects on health. Excessive vibrations also reduce the service live of the structures and limit the fields of their utilization. In oscillations, the viscoelastic moduli of a material are complex and it is their loss part - the product of the stiffness part and loss tangent - that is commonly viewed as a figure of merit in noise and vibration damping applications. The stiffness modulus and loss tangent are usually mutually exclusive properties so it is a technological challenge to develop materials that simultaneously combine high stiffness and high loss. Here we achieve this rare balance of properties by filling a solid polymer matrix with rigid inorganic spheres coated by a sub-micron layer of a viscoelastic material with a high level of internal friction. We demonstrate that this combination can be experimentally realised and that the analytically predicted behaviour is closely reproduced, thereby escaping the often termed 'Ashby' limit for mechanical stiffness/damping trade-off and offering a new route for manufacturing advanced composite structures with markedly reduced noise and vibration levels
- …