5,950 research outputs found
Some studies on the behavior of W-RE thermocouple materials at high temperatures
Bare 0.25 mm diameter W-Re alloy thermoelements (W, W-3% Re, W-5% Re and W-25%) and BeO-insulated W-3% Re and W-25% Re thermoelements were examined for metallurgical, chemical and thermal emf changes after testing for periods up to 1000 hours at temperatures principally in the range 2000 to 2400 K. Environments for the tests consisted of high purity argon, hydrogen, helium or nitrogen gases. Commercially obtained bare-wire thermoelements typically exhibited a shift in their emf-temperature relationship upon initial exposure. The shift was completed by thermally aging the W-3% Re thermoelement for 1 hour and the W-25% Re thermoelement for 2 minutes at 2400 K in argon or hydrogen. Aged thermoelements experienced no appreciable drift with subsequent exposure at 2400 K in the gaseous environments. The chemically doped W3% Re thermoelement retained a small-grained structure for exposure in excess of 50 hours at 2400 K. BeO-insulated thermoelement assemblies showed varied behavior that depended upon the method of exposure. However, when the assemblies were heated in a furnace, no serious material incompatibility problems were found if the materials were given prior thermal treatments. Thermocouples, assembled from aged W-3% Re and W-25% Re thermoelements and degassed sintered BeO insulators, exhibited a drift of only 2 to 3 K during exposure in argon at 2070 K for 1029 hours
An investigation of W-3% Re and W-25% Re thermoelements in vacuum, argon and hydrogen Final report
High vacuum, argon, and hydrogen effects on bare wire rhenium thermoelements at high temperature
High reliability sheathed, beryllia insulated, tungsten-rhenium alloy thermocouple assemblies; their fabrication and EMF stability
Tantalum sheathed, BeO insulated, W-3% Re/W-25% Re thermocouple assemblies were fabricated and their emf drift determined during 2059 hours of exposure at 2073 K in a gaseous helium environment. The sheathed thermocouple assemblies were constructed from aged thermoelements, specially heat-treated BeO insulators, and specially cleaned and etched tantalum sheaths. Their thermal emf drifts ranged from the equivalent of only -0.3 to -0.8 K drift per 1000 hours of exposure at 2073 K. No evidence of any gross chemical attack or degradation of the component materials was found. The emf drift and material behavior of some unsheathed, BeO insulated, W-3% Re/W-25% Re thermocouples at 2250 and 2400 K were also determined. Unsheathed thermocouples tested in an argon environment at 2250 K for 1100 hours and at 2400 K for 307 hours exhibited changes in thermal emf that typically ranged from the equivalent of a few degrees K to as much as +11 K. Post-test examinations of these thermocouples revealed some undesirable material degradation and interaction which included erosion of the BeO insulators and contamination of the thermoelements by tantalum from the tantalum blackbody enclosure in which the thermocouples were contained
Cellular automaton rules conserving the number of active sites
This paper shows how to determine all the unidimensional two-state cellular
automaton rules of a given number of inputs which conserve the number of active
sites. These rules have to satisfy a necessary and sufficient condition. If the
active sites are viewed as cells occupied by identical particles, these
cellular automaton rules represent evolution operators of systems of identical
interacting particles whose total number is conserved. Some of these rules,
which allow motion in both directions, mimic ensembles of one-dimensional
pseudo-random walkers. Numerical evidence indicates that the corresponding
stochastic processes might be non-Gaussian.Comment: 14 pages, 5 figure
Draft Genome Sequence of Frankia sp. Strain CcI6, a Salt-Tolerant Nitrogen-Fixing Actinobacterium Isolated from the Root Nodule of Casuarina cunninghamiana
Members of the actinomycete genus Frankia form a nitrogen-fixing symbiosis with 8 different families of actinorhizal plants. We report a 5.57-Mbp draft genome sequence for Frankia sp. strain CcI6, a salt-tolerant nitrogen-fixing actinobacterium isolated from root nodules of Casurina cunninghamiana grown in Egyptian soils
A Complexity View of Rainfall
We show that rain events are analogous to a variety of nonequilibrium
relaxation processes in Nature such as earthquakes and avalanches. Analysis of
high-resolution rain data reveals that power laws describe the number of rain
events versus size and number of droughts versus duration. In addition, the
accumulated water column displays scale-less fluctuations. These statistical
properties are the fingerprints of a self-organized critical process and may
serve as a benchmark for models of precipitation and atmospheric processes.Comment: 4 pages, 5 figure
Permanent Draft Genome Sequences for Two Variants of Frankia sp. Strain CpI1, the First Frankia Strain Isolated from Root Nodules of Comptonia peregrina
Frankia stains CpI1-S and CpI1-P are members of Frankia lineage Ia that are able to reinfect plants of the Betulaceae and Myricaceae families. Here, we report two 7.6-Mbp draft genome sequences with 6,396 and 6,373 candidate protein-coding genes for CpI1-S and CpI1-P, respectively
Permanent draft genome sequences for two variants of Frankia sp. strain CpI1, the first Frankia strain isolated from root nodules of Comptonia peregrina
Frankia stains CpI1-S and CpI1-P are members of Frankia lineage Ia that are able to reinfect plants of the Betulaceae and Myricaceae families. Here, we report two 7.6-Mbp draft genome sequences with 6,396 and 6,373 candidate protein-coding genes for CpI1-S and CpI1-P, respectively
Low-cost directionally-solidified turbine blades, volume 2
An endothermically heated technology was used to manufacture low cost, directionally solidified, uncooled nickel-alloy blades for the TFE731-3 turbofan engine. The MAR-M 247 and MER-M 100+Hf blades were finish processed through heat treatment, machining, and coating operations prior to 150 hour engine tests consisting of the following sequences: (1) 50 hours of simulated cruise cycling (high fatigue evaluation); (2) 50 hours at the maximum continuous power rating (stress rupture endurance (low cycle fatigue). None of the blades visually showed any detrimental effects from the test. This was verified by post test metallurgical evaluation. The specific fuel consumption was reduced by 2.4% with the uncooled blades
- …