12,695 research outputs found
Individual and corporate sources of motivation - A preliminary investigation
Rating scales of individual and corporate motivations and factor analysis of result
Performance of LI-1542 reusable surface insulation system in a hypersonic stream
The thermal and structural performance LI-1542 reusable surface insulation (RSI) tiles was investigated. The test panel was designed to represent part of the surface structure on a space shuttle orbiter fuselage along a 1250 K isotherm. Aerothermal tests were conducted at a free-stream Mach number of 6.6, a total temperature of 1820 K, Reynolds numbers of 2 millon and 5 million per meter, and dynamic pressures of 26 and 65 kPa. The RSI tiles demonstrated good thermal protection and structural integrity. High temperatures were caused by misalinement in tile height, offset the tile longitudinal alinement, and leakage around thermal seals when differential pressure existed across the panel. The damage tolerance of LI-1542 RSI appeared high. The tile coating crazed early in the test program, but this did not effect the tile integrity. Erosion of the tile edges occurred at forward-facing steps and at the ends of longitudinal gaps because of particle impacts and flow shear
A Semantic Hierarchy for Erasure Policies
We consider the problem of logical data erasure, contrasting with physical
erasure in the same way that end-to-end information flow control contrasts with
access control. We present a semantic hierarchy for erasure policies, using a
possibilistic knowledge-based semantics to define policy satisfaction such that
there is an intuitively clear upper bound on what information an erasure policy
permits to be retained. Our hierarchy allows a rich class of erasure policies
to be expressed, taking account of the power of the attacker, how much
information may be retained, and under what conditions it may be retained.
While our main aim is to specify erasure policies, the semantic framework
allows quite general information-flow policies to be formulated for a variety
of semantic notions of secrecy.Comment: 18 pages, ICISS 201
Simplified methods of assessing the impact of grid frequency dynamics upon generating plants
The frequency of the national electricity grid is affected by fluctuations in supply and demand, and so continually "judders" in an essentially unpredictable fashion around 50 Hz. At present such perturbations do not seemingly affect Nuclear Electric as most of their plant is run at more or less constant load, but they would like to be able to offer the national grid a mode of operation in which they "followed" the grid frequency: i.e., as the frequency rose above or fell below 50 Hz, the plant's output would be adjusted so as to tend to restore the frequency to 50 Hz. The aim is to maintain grid frequency within 0.2 Hz of its notional value. Such a mode of operation, however, would cause a certain amount of damage to plant components owing to the consequent continual changes in temperature and pressure within them.
Nuclear Electric currently have complex computational models of how plants will behave under these conditions, which allows them to compute plant data (e.g., reactor temperatures) from given grid frequency data. One approach to damage assessment would require several years'-worth of real grid data to be fed into this model and the corresponding damage computed (via "cycle distributions" created by their damage experts). The results of this analysis would demonstrate one of three possibilities: the damage may be acceptable under all reasonable operating conditions; or it may be acceptable except in the case of an exceptional abrupt change in grid frequency (caused by power transmission line failure, or another power station suddenly going off-line, for instance), in which case some kind of backup supply (e.g., gas boilers) would be required; or it may simply be unacceptable.
However, their current model runs in approximately real time, making it inappropriate for such a large amount of data: our problem was to suggest alternative approaches. Specifically, we were asked the following questions:
- Can component damage be reliably estimated directly from cycle distributions of grid frequency? i.e., are there maps from frequency cycle distributions to plant parameter cycle distributions?
- Can a simple model of plant dynamics be used to assess the potential for such maps?
- What methods can be used to select representative samples of grid frequency behaviour?
- What weightings should be applied to the selections?
- Is it possible to construct a "cycle transform" (Fourier transform) which will capture the essential features of grid frequency and which can then be inverted to generate simulated frequency transients?
We did not consider this last question, other than to say "probably not".
We were supplied with data of the actual grid frequency measurements for the evening of 29/7/95, and the corresponding plant responses (obtained using Nuclear Electric's current computational model). A simplified nonlinear mathematical model of the plant was also provided.
Two main approaches were considered: statistical prediction and analytical modelling via a reduction of the simplified plant model
The Spitzer View of Low-Metallicity Star Formation: II. Mrk 996, a Blue Compact Dwarf Galaxy with an Extremely Dense Nucleus
(abridged) We present new Spitzer, UKIRT and MMT observations of the blue
compact dwarf galaxy (BCD) Mrk 996, with an oxygen abundance of
12+log(O/H)=8.0. This galaxy has the peculiarity of possessing an
extraordinarily dense nuclear star-forming region, with a central density of
~10^6 cm^{-3}. The nuclear region of Mrk 996 is characterized by several
unusual properties: a very red color J-K = 1.8, broad and narrow emission-line
components, and ionizing radiation as hard as 54.9 eV, as implied by the
presence of the OIV 25.89 micron line. The nucleus is located within an
exponential disk with colors consistent with a single stellar population of age
>1 Gyr. The infrared morphology of Mrk 996 changes with wavelength. The IRS
spectrum shows strong narrow Polycyclic Aromatic Hydrocarbon (PAH) emission,
with narrow line widths and equivalent widths that are high for the metallicity
of Mrk 996. Gaseous nebular fine-structure lines are also seen. A CLOUDY model
requires that they originate in two distinct HII regions: a very dense HII
region of radius ~580 pc with densities declining from ~10^6 at the center to a
few hundreds cm^{-3} at the outer radius, where most of the optical lines
arise; and a HII region with a density of ~300 cm^{-3} that is hidden in the
optical but seen in the MIR. We suggest that the infrared lines arise mainly in
the optically obscured HII region while they are strongly suppressed by
collisional deexcitation in the optically visible one. The hard ionizing
radiation needed to account for the OIV 25.89 micron line is most likely due to
fast radiative shocks propagating in an interstellar medium. A hidden
population of Wolf-Rayet stars of type WNE-w or a hidden AGN as sources of hard
ionizing radiation are less likely possibilities.Comment: 48 pages, 13 figures, accepted for publication in the Astrophysical
Journa
Hopping Conduction and Bacteria: Transport in Disordered Reaction-Diffusion Systems
We report some basic results regarding transport in disordered
reaction-diffusion systems with birth (A->2A), death (A->0), and binary
competition (2A->A) processes. We consider a model in which the growth process
is only allowed to take place in certain areas--"oases"--while the rest of
space--the "desert"--is hostile to growth. In the limit of low oasis density,
transport is mediated through rare "hopping" events, necessitating the
inclusion of discreteness effects in the model. By first considering transport
between two oases, we are able to derive an approximate expression for the
average time taken for a population to traverse a disordered medium.Comment: 4 pages, 2 figure
Natural Connections Demonstration Project, 2012- 2016: Final Report
This report presents the key findings from the Natural Connections Demonstration Project, that aimed to encourage teachers to take curricular learning outdoors. The project was commissioned by DEFRA, Natural England and Historic England, and delivered by a team at Plymouth University. 125 schools contributed to the evaluation which found that: 1. schools most likely to engage with outdoor learning displayed strong leadership and were open-minded about trying new things 2. schools reported a statistically-significant increase in the amount of time spent on outdoor learning activity across the project 3. Schools adopted many different models of outdoor learning 4. Schools invested time, goodwill, energy and funding in outdoor learning 5. Over 90 per cent of responding schools agreed that outdoor learning was useful for curriculum delivery 6. Outdoor learning had positive impacts for teachers and pupils 7. the project model of distributed independent brokerage was found to have the capacity to unlock latent demand for outdoor learning in schools, and to support schools in embedding low-cost outdoor learning practice
Processingâ Dependent Microstructure of AgClâ CsAgCl2 Eutectic Photonic Crystals
Directional solidification of a eutectic melt allows control over the resultant eutectic microstructure, which in turn impacts both the mechanical and optical properties of the material. These selfâ organized phaseâ separated eutectic materials can be tuned to have periodicities from tens of micrometers down to nanometers. Furthermore, the two phases possess differences in their refractive index leading to interesting optical properties that can be tailored within the visible to infrared wavelength regime. It is found the binary salt eutectic AgClâ CsAgCl2 system forms a rod microstructure with sample draw rates up to 0.2 mm sâ 1 which transitions to a lamellar microstructure at draw rates greater than 0.36 mm sâ 1. Heatâ transfer simulations reveal a draw rateâ dependent direction of motion of the solidification front, which for a range of draw rates requires nucleation of the minority solid phase at the sample wall. Phaseâ field modeling indicates that the initial eutectic structure at the sample boundary, either rod or lamellar, dictates the bulk eutectic morphology. These samples contain submicrometer periodicities which coupled with their optical transparency results in them exhibiting draw rateâ dependent nearâ IR reflectance peaks consistent with stop bands for 2D hexagonal (rod) and 1D planar (lamellar) photonic crystals.The eutectic composition of the molten salts AgCl and CsCl exhibits a microstructural transition from rod to lamellar upon varying the draw rates controlled by directional solidification. This transition is dominated by the initial formation at the surface of either the rod or lamellar structure. The resultant eutectic microstructures have optical properties consistent with their being 2D and 1D photonic crystals.Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/145412/1/adom201701316.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/145412/2/adom201701316_am.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/145412/3/adom201701316-sup-0001-S1.pd
Aerodynamic heating on the corrugated surface of a 10.2 deg half-angle blunted cone at Mach 6.7
A 10.2 deg half-angle blunted cone with corrugated surfaces was tested in the Langley 8-foot high-temperature structures tunnel to measure the aerodynamic heating of its surfaces. The tests were made in a turbulent boundary layer at angles of attack of 0 deg, 5 deg, and 10 deg. Heating of the windward side was in reasonable agreement with theoretical turbulent predictions for a smooth cone, while heating on the leeward side was between laminar and turbulent predictions as a result of local transitional flow or flow separation produced by high lee-side pressures. Localized heating measurements indicated a significant increase in heating at large cross-flow angles, with the maximum heating rates occurring where the flow reattaches on the upstream side of the corrugation crest and the minimum occurring on the downstream side where the flow is separated
Novel scaffolds for tissue engineering of human skeletal muscles
Tissue engineering is a
multidisciplinary approach aimed at producing new
organs and tissues for implantation in order to
circumvent the limitations imposed by current
techniques such as surgical tissue transfer.
Structure begets function and highly ordered
skeletal muscle (SkM) consists of elongated,
multinucleate muscle cells (fibres) that are arranged
in bundles surrounded by connective tissue sheaths.
It is therefore of no surprise that tissue engineered
SkM complexes are often designed around fibre
containing scaffolds. This work is the natural
continuation of strategies introduced at TCES 200
- …