Adaptive RF Pigtail Probe Modeling for De-embedding of RF Measurements

This disclosure describes techniques for accurate estimation and de-embedding of the effects of pigtail probes in circuits. An adaptive pigtail model is developed and described that can accurately de-embed the effects of pigtail probes in digital circuits. Example parameters are identified that include pigtail length, tip length, pigtail tilt degree, ground distance, and solder amount. A pigtail simulation model is developed to model the soldered pigtail probe. The dependency of circuit impedance on the identified parameters is determined by experimentation which indicates that circuit performance can be boosted by short ground distance lengths, low tilt angles, thick support wires, short pin and cable lengths, and thick support wires. The pigtail model can be utilized to derive de-embedded results for different pigtail probe configurations without a need for explicitly measuring de-embedded results for those configurations

On the Effect of Lubricant on Pool Boiling Heat Transfer Performance

   For typical vapor compression processes, lubricant oil is very essential for lubricating and sealing the sliding parts and the lubricant also takes part in cushioning cylinder valves. However lubricants may migrate to the evaporator to alter the heat transfer characteristics. This is can be made clear from the viscosity and surface tension of lubricant since the viscosity of lubricant oil is about two to three orders higher than that of refrigerant whereas the corresponding surface tension of lubricant is approximately one order higher. Typically, the presence of lubricant may deteriorate heat transfer performance, yet this phenomenon becomes more severe when the lubricant mass fraction is higher. However, some previous literatures had clearly showed that the presence of lubricant oil may favor the heat transfer performance at a low lubricant fraction and the heat transfer performance may peak at a specific oil concentration. In this study, the authors aim at clarifying this phenomenon subject to pool boiling condition. Various parameters affecting the heat transfer coefficient, such as viscosity, surface tension, critical solution temperature and other thermodynamic and transport properties will be examined.    During pool boiling process, the lubricant accumulates on the surface since the refrigerant is preferential to evaporate. Hence, excess lubricant enrichment on the surface results in a thin lubricant excess layer and a thermal boundary layer, which influence the heat transfer performance, either enhancement or degradation. The excess layer may bring about a liquid-solid surface energy reduction which increases site density and reduces the bubble departure diameter, causing enhancement and degradation in heat transfer performance, respectively. However, the effect of the bubble departure diameter normally surpasses the influence of site density. This may be the crucial reason that gives rise to an occurrence of the plateau of heat transfer coefficient and followed by an apparent decline of heat transfer coefficient with a further increase of lubricant concentration.    Moreover, with the preferential evaporation of the refrigerant, a surface tension gradient is formed, which induces the Marangoni effect through which refrigerant/lubricant mixtures is supplied toward the contact line. From the phase equilibrium diagram, the maximum of the Marangoni number may occur at the low lubricant concentration with a maximum temperature difference. Hence, the presence of Marangoni effect may also be the favor the heat transfer accordingly. Also, a small fraction of lubricant will increase a larger viscosity that provide a thicker thermal boundary layer which may activate more site density, and enhances the heat transfer performance. Furthermore, miscibility may also play a crucial factor that affects the pool boiling heat transfer performance. The fluid with a smaller difference between the bulk fluid temperature and critical solution temperature may yield a better heat transfer performance by drawing superheated liquid onto the bubble sides.

Sampling Neural Radiance Fields for Refractive Objects

Recently, differentiable volume rendering in neural radiance fields (NeRF) has gained a lot of popularity, and its variants have attained many impressive results. However, existing methods usually assume the scene is a homogeneous volume so that a ray is cast along the straight path. In this work, the scene is instead a heterogeneous volume with a piecewise-constant refractive index, where the path will be curved if it intersects the different refractive indices. For novel view synthesis of refractive objects, our NeRF-based framework aims to optimize the radiance fields of bounded volume and boundary from multi-view posed images with refractive object silhouettes. To tackle this challenging problem, the refractive index of a scene is reconstructed from silhouettes. Given the refractive index, we extend the stratified and hierarchical sampling techniques in NeRF to allow drawing samples along a curved path tracked by the Eikonal equation. The results indicate that our framework outperforms the state-of-the-art method both quantitatively and qualitatively, demonstrating better performance on the perceptual similarity metric and an apparent improvement in the rendering quality on several synthetic and real scenes.Comment: SIGGRAPH Asia 2022 Technical Communications. 4 pages, 4 figures, 1 table. Project: https://alexkeroro86.github.io/SampleNeRFRO/ Code: https://github.com/alexkeroro86/SampleNeRFR

Sodium vanadate combined with l-ascorbic acid delays disease progression, enhances motor performance, and ameliorates muscle atrophy and weakness in mice with spinal muscular atrophy

BACKGROUND: Proximal spinal muscular atrophy (SMA), a neurodegenerative disorder that causes infant mortality, has no effective treatment. Sodium vanadate has shown potential for the treatment of SMA; however, vanadate-induced toxicity in vivo remains an obstacle for its clinical application. We evaluated the therapeutic potential of sodium vanadate combined with a vanadium detoxification agent, L-ascorbic acid, in a SMA mouse model. METHODS: Sodium vanadate (200 μM), L-ascorbic acid (400 μM), or sodium vanadate combined with L-ascorbic acid (combined treatment) were applied to motor neuron-like NSC34 cells and fibroblasts derived from a healthy donor and a type II SMA patient to evaluate the cellular viability and the efficacy of each treatment in vitro. For the in vivo studies, sodium vanadate (20 mg/kg once daily) and L-ascorbic acid (40 mg/kg once daily) alone or in combination were orally administered daily on postnatal days 1 to 30. Motor performance, pathological studies, and the effects of each treatment (vehicle, L-ascorbic acid, sodium vanadate, and combined treatment) were assessed and compared on postnatal days (PNDs) 30 and 90. The Kaplan-Meier method was used to evaluate the survival rate, with P < 0.05 indicating significance. For other studies, one-way analysis of variance (ANOVA) and Student's t test for paired variables were used to measure significant differences (P < 0.05) between values. RESULTS: Combined treatment protected cells against vanadate-induced cell death with decreasing B cell lymphoma 2-associated X protein (Bax) levels. A month of combined treatment in mice with late-onset SMA beginning on postnatal day 1 delayed disease progression, improved motor performance in adulthood, enhanced survival motor neuron (SMN) levels and motor neuron numbers, reduced muscle atrophy, and decreased Bax levels in the spinal cord. Most importantly, combined treatment preserved hepatic and renal function and substantially decreased vanadium accumulation in these organs. CONCLUSIONS: Combined treatment beginning at birth and continuing for 1 month conferred protection against neuromuscular damage in mice with milder types of SMA. Further, these mice exhibited enhanced motor performance in adulthood. Therefore, combined treatment could present a feasible treatment option for patients with late-onset SMA

Applying a Kano quality model for intelligent green building design strategies in Taiwan

Intelligent green building (IGB) industry has received considerable global recognition due to the rapid development of advanced technology, intelligent materials, innovative products, and services in recent years. Although various cross-domain experiments and practices with respect to IGB projects are ready for operation, the notion and benefits of IGB are still ambiguous and debatable. The purpose of this study is to apply a Kano quality model and a customer satisfaction matrix to evaluate professional designers’ and general users’ satisfaction, preferences, and acceptability of IGB design strategies. The study result reveals that the proposed approach could be a useful tool to explore similarities and discrepancies of strategy preferences between designers and users, and these findings could effectively decrease the communication gap for future IGB design

Multi-Segment Foam Flow Field in Ambient Pressure Polymer Exchange Membrane Fuel Cell

In order to produce low-cost flow field plates for polymer electrolyte membrane fuel cells, we used nickel foam in this study rather than conventional flow field. Nickel foam has high electron conductivity, thermal conductivity, and mechanical strength. Electrochemical impedance spectrum analysis is carried out to evidence the use on flow field plates of nickel foam. From the impedance fitting results, the nickel foam cases showed the lower contact resistance than the serpentine. However, such plates have poor performance at low temperatures and ambient pressure. In order to overcome this, a multi-segment foam flow field is designed in this study. This increased the performance of the polarization curve by 70% from 162 to 275.5 mw cm-2 than the original nickel foam design. Also, the mass transfer resistance was reduced, and the Warburg impedance value of the operation voltage decreased by 0.4 V. The numerical analysis results demonstrate that increased segment numbers can increase the performance of the multi-segment foam flow field

Indigenous Case of Disseminated Histoplasmosis, Taiwan

We report the first indigenous case of disseminated histoplasmosis in Taiwan diagnosed by histopathology of bone marrow, microbiologic morphology, and PCR assay of the isolated fungus. This case suggests that histoplasmosis should be 1 of the differential diagnoses of opportunistic infections in immunocompromised patients in Taiwan