Fattori di emissione dalla combustione di legna e pellet in piccoli apparecchi domestici

The aim of this study was to report emission factors of pollutants (i.e., carbon monoxide, nitrogen oxides, non-methane hydrocarbons, particulate matter, polycyclic aromatic hydrocarbons, dioxins) from biomass burning residential heating appliances. The influence of several factors such as biomass type, appliance and combustion cycle was investigated. Four manually fed (6-11 kW) firewood burning and two automatic wood pellets (8.8-25 kW) appliances were tested under real-world operating conditions in order to determine the actual environmental performance of the appliance. The experimental EFs were also compared with the values proposed by the European emission inventory guidebook used in the local inventory in order to evaluate their representativeness of real world emissions. The composite macropollutant EFs for manually fed appliances are: for CO 5858 g GJ-1, for NOx 122 g GJ-1, NMHC 542 g GJ-1, PM 254 g GJ-1, whereas emissions are much lower for automatic pellets appliances: CO 219 g GJ-1, for NOx 66 g GJ-1, NMHC 5 g GJ-1, PM 85 g GJ-1. The open fireplace appears to have very high emission factors, however traditional and advanced stoves show the highest overall CO EFs. Especially for the advanced stove real-world emissions are far worse than those measured under cycles used for type testing of residential solid fuel appliances. No great difference is observed for different firewood types in batch working appliances, diversely the quality of the pellets is observed to influence directly the emission performance of the automatic appliances. Benzo(b)fluoranthene is the PAH with the highest contribution (110 mg GJ-1 for manual appliances and 2 mg GJ-1 for automatic devices) followed by benzo(a)pyrene (77 mg GJ-1 for manual appliances and 0,8 mg GJ-1 for automatic devices)

Experimental investigations of the influence of transitory phases on small-scale wood combustion emissions

To investigate the influence of transitory phases on average emission factors of small-scale wood combustion plants, a specific study was carried out. Several on-line measurements have been carried out for the aerosol and gas emitted from an open fireplace (8 kW), a closed fireplace (I I kW), a conventional wood stove (6.5 kW) under different operating conditions during initial kindling and refilling stages. Some tests have also been performed with different fuel types and moisture level. Results confirm that emissions are generally higher during transient phases. The paper provides a description of measuring techniques and results obtained under tested conditions for different pollutants and appliances