271 research outputs found
Three-dimensional mortar-based frictional contact treatment in isogeometric analysis with NURBS
A three-dimensional mortar-based frictional contact treatment in isogeometric analysis with NURBS is presented in the finite deformation regime. Within a setting where the NURBS discretization of the contact surface is inherited directly from the NURBS discretization of the volume, the contact integrals are evaluated through a mortar approach where the geometrical and frictional contact constraints are treated through a projection to control point quantities. The formulation delivers a non-negative pressure distribution and minimally oscillatory local contact interactions with respect to alternative Lagrange discretizations independent of the discretization order. These enable the achievement of improved smoothness in global contact forces and moments through higher-order geometrical descriptions. It is concluded that the presented mortar-based approach serves as a common basis for treating isogeometric contact problems with varying orders of discretization throughout the contact surface and the volume. © 2011 Elsevier B.V
Isogeometric Boundary-Element Analysis for the Wave-Resistance Problem using T-splines
In this paper we couple collocated Boundary Element Methods (BEM) with unstructured analysis suitable
T-spline surfaces for solving a linear Boundary Integral Equation (BIE) arising in the
context of a ship-hydrodynamic problem, namely the so-called Neumann-Kelvin problem, following
the formulation by Brard (1972) [1] and Baar & Price (1988) [2]. The local-refinement capabilities
of the adopted T-spline bases, which are used for representing both the geometry of the hull and
approximating the solution of the associated BIE, in accordance with the Isogeometric concept
proposed by Hughes et al. (2005) [3], lead to a solver that achieves the same error level for many
fewer degrees of freedom as compared with the corresponding NURBS-based Isogeometric-BEM
solver recently developed in Belibassakis et al. (2013) [4]. In this connection, this paper makes a
step towards integrating modern CAD representations for ship-hulls with hydrodynamic solvers of
improved accuracy and efficiency, which is a prerequisite for building efficient ship-hull optimizers
Reduced basis isogeometric mortar approximations for eigenvalue problems in vibroacoustics
We simulate the vibration of a violin bridge in a multi-query context using
reduced basis techniques. The mathematical model is based on an eigenvalue
problem for the orthotropic linear elasticity equation. In addition to the nine
material parameters, a geometrical thickness parameter is considered. This
parameter enters as a 10th material parameter into the system by a mapping onto
a parameter independent reference domain. The detailed simulation is carried
out by isogeometric mortar methods. Weakly coupled patch-wise tensorial
structured isogeometric elements are of special interest for complex geometries
with piecewise smooth but curvilinear boundaries. To obtain locality in the
detailed system, we use the saddle point approach and do not apply static
condensation techniques. However within the reduced basis context, it is
natural to eliminate the Lagrange multiplier and formulate a reduced eigenvalue
problem for a symmetric positive definite matrix. The selection of the
snapshots is controlled by a multi-query greedy strategy taking into account an
error indicator allowing for multiple eigenvalues
Variational Multiscale Stabilization and the Exponential Decay of Fine-scale Correctors
This paper addresses the variational multiscale stabilization of standard
finite element methods for linear partial differential equations that exhibit
multiscale features. The stabilization is of Petrov-Galerkin type with a
standard finite element trial space and a problem-dependent test space based on
pre-computed fine-scale correctors. The exponential decay of these correctors
and their localisation to local cell problems is rigorously justified. The
stabilization eliminates scale-dependent pre-asymptotic effects as they appear
for standard finite element discretizations of highly oscillatory problems,
e.g., the poor approximation in homogenization problems or the pollution
effect in high-frequency acoustic scattering
The Influence of Quadrature Errors on Isogeometric Mortar Methods
Mortar methods have recently been shown to be well suited for isogeometric
analysis. We review the recent mathematical analysis and then investigate the
variational crime introduced by quadrature formulas for the coupling integrals.
Motivated by finite element observations, we consider a quadrature rule purely
based on the slave mesh as well as a method using quadrature rules based on the
slave mesh and on the master mesh, resulting in a non-symmetric saddle point
problem. While in the first case reduced convergence rates can be observed, in
the second case the influence of the variational crime is less significant
An Adjoint-based Derivative Evaluation Method for Time-dependent Aeroelastic Optimization of Flexible Aircraft
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/106483/1/AIAA2013-1530.pd
A New Triangular Hybrid Displacement Function Element for Static and Free Vibration Analyses of Mindlin-Reissner Plate
A new 3-node triangular hybrid displacement function Mindlin- Reissner plate element is developed. Firstly, the modified variational functional of complementary energy for Mindlin-Reissner plate, which is eventually expressed by a so-called displacement function F, is proposed. Secondly, the locking-free formulae of Timoshenko’s beam theory are chosen as the deflection, rotation, and shear strain along each element boundary. Thirdly, seven fundamental analytical solutions of the displacement function F are selected as the trial functions for the assumed resultant fields, so that the assumed resultant fields satisfy all governing equations in advance. Finally, the element stiffness matrix of the new element, denoted by HDF-P3-7β, is derived from the modified principle of complementary energy. Together with the diagonal inertia matrix of the 3-node triangular isoparametric element, the proposed element is also successfully generalized to the free vibration problems. Numerical results show that the proposed element exhibits overall remarkable performance in all benchmark problems, especially in the free vibration analyses
Optimization of a frame structure subjected to a plastic deformation
An optimization method for a frame structure subjected to a plastic deformation is proposed in this paper. The method is based on the generalized layout optimization method proposed by Bendsøe and Kikuchi in 1988, where the solid-cavity composite material is distributed in the admissible domain and the cavity size is determined so that it becomes large in the area where the strain energy is small. Elasto-plastic analysis based on the homogenization method is carried out to obtain the nonlinear average stress-strain relations of a porous material first. Then the optimization algorithm of a frame structure is derived by taking plastification into account. Finally in order to demonstrate the effectiveness of the present algorithm, several numerical examples are illustrated.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/46071/1/158_2005_Article_BF01742592.pd
- …