Exceptionally Long-Lived Charge Separated State in Zeolitic Imidazolate Framework: Implication for Photocatalytic Applications

Zeolitic imidazolate frameworks (ZIFs) have emerged as a novel class of porous metal–organic frameworks (MOFs) for catalysis application because of their exceptional thermal and chemical stability. Inspired by the broad absorption of ZIF-67 in UV–vis-near IR region, we explored its excited state and charge separation dynamics, properties essential for photocatalytic applications, using optical (OTA) and X-ray transient absorption (XTA) spectroscopy. OTA results show that an exceptionally long-lived excited state is formed after photoexcitation. This long-lived excited state was confirmed to be the charge-separated (CS) state with ligand-to-metal charge-transfer character using XTA. The surprisingly long-lived CS state, together with its intrinsic hybrid nature, all point to its potential application in heterogeneous photocatalysis and energy conversion

Two stories from the ISACS 12 conference: solar-fuel devices and catalyst identification

The International Symposia for advancing the Chemical Sciences, a partner of the journal Chemical Science, held its 12th meeting (ISACS 12) at the University of Cambridge on September 3–6 2013. ISACS 12 focused on “Challenges in Chemical Renewable Energy”, with oral presentations organized along five themes: photovoltaics, solar fuels, molecular and bio-inspired catalysts, new materials for batteries, and fuel cells. ISACS 12 also included a presentation on the sugar cane-based energy industry in Brazil, a recording by the BBC World Service, and two poster sessions. This conference was an exciting, busy place to meet people, exchange ideas, and foster collaboration

Nanoelectrical and Nanoelectrochemical Imaging of Pt/p-Si and Pt/p+-Si Electrodes

The interfacial properties of electrolessly deposited Pt nanoparticles (Pt-NP) on p-Si and p+-Si electrodes have been resolved on the nanometer scale using a combination of scanning probe methods. Atomic-force microscopy (AFM) showed highly dispersed Pt nanoparticles. Conductive AFM measurements showed that only about half of the particles exhibited measurable contact currents, with a factor of 10^3 difference in current. Local current-voltage measurements revealed a rectifying junction with a resistance of ≥ 10 MΩ at the Pt-NP/p-Si interface, while Pt-NP/p+-Si samples formed an Ohmic junction with a local resistance of ≥ 1 MΩ. The particles were strongly attached to the sample surface in air. However in contact with an electrolyte, the adhesion of the particles to the surface was substantially lower. Scanning electrochemical microscopy (SECM) showed smaller, but more uniform electrochemical currents for the particles relative to the currents observed in conductive AFM measurements. In accord with the conductive AFM measurements, SECM measurements showed conductance through the substrate for only a minority of the particles. These results suggest that the electrochemical performance of the electrolessly deposited Pt nanoparticles on Si is ascribable to: 1) the high resistance of the contact between the particles and the substrate; 2) the low (<50%) fraction of particles that support high currents; and 3) the low adhesion of the particles to the surface in the electrolyte

Transition Metal Substitution Effects on Metal-to-Polyoxometalate Charge Transfer

A series of heterobimetallic transition metal substituted polyoxometalates (TMSPs) have been synthesized based on the CoII-centered ligand [CoIIW11O39]10-. The eight complex series, [CoII(MxOHy)W11O39](12-x-y)- (MxOHy = VIVO, CrIII(OH2), MnII(OH2), FeIII(OH2), CoII(OH2), NiII(OH2), CuII(OH2), ZnII(OH2)), of which six are reported for the first time, was synthesized starting from [CoIIIW11O39]9- and studied using spectroscopic, electrochemical, and computational techniques to evaluate the influence of substituted transition metals on the photodynamics of the metal-to-polyoxometalate charge transfer (MPCT) transition. The bimetallic complexes all show higher visible light absorption than the plenary [CoIIW12O40]6- and demonstrate the same MPCT transition as the plenary complex, but have shorter excited state lifetimes (sub-300 ps in aqueous media). The decreased lifetimes are rationalized on the basis of nonradiative relaxation due to coordinating aqua ligands, increased interaction with cations due to increased negative charge, and the energy gap law, with the strongest single factor appearing to be the charge on the anion. The most promising results are from the Cr- and Fe-substituted systems, which retain excited state lifetimes at least 50% of that of [CoIIW12O40]6- while more than tripling the absorbance at 400 nm

Efficient Water-Splitting Device Based on a Bismuth Vanadate Photoanode and Thin-Film Silicon Solar Cells

A hybrid photovoltaic/photoelectrochemical (PV/PEC) water-splitting device with a benchmark solar-to-hydrogen conversion efficiency of 5.2 % under simulated air mass (AM) 1.5 illumination is reported. This cell consists of a gradient-doped tungsten–bismuth vanadate (W:BiVO_4) photoanode and a thin-film silicon solar cell. The improvement with respect to an earlier cell that also used gradient-doped W:BiVO4 has been achieved by simultaneously introducing a textured substrate to enhance light trapping in the BiVO4 photoanode and further optimization of the W gradient doping profile in the photoanode. Various PV cells have been studied in combination with this BiVO_4 photoanode, such as an amorphous silicon (a-Si:H) single junction, an a-Si:H/a-Si:H double junction, and an a-Si:H/nanocrystalline silicon (nc-Si:H) micromorph junction. The highest conversion efficiency, which is also the record efficiency for metal oxide based water-splitting devices, is reached for a tandem system consisting of the optimized W:BiVO_4 photoanode and the micromorph (a-Si:H/nc-Si:H) cell. This record efficiency is attributed to the increased performance of the BiVO_4 photoanode, which is the limiting factor in this hybrid PEC/PV device, as well as better spectral matching between BiVO_4 and the nc-Si:H cell

Solar-Driven H_2O_2 Generation From H_2O and O_2 Using Earth-Abundant Mixed-Metal Oxide@Carbon Nitride Photocatalysts

Light-driven generation of H_2O_2 only from water and molecular oxygen could be an ideal pathway for clean production of solar fuels. In this work, a mixed metal oxide/graphitic-C_3N_4 (MMO@C_3N_4) composite was synthesized as a dual-functional photocatalyst for both water oxidation and oxygen reduction to generate H_2O_2. The MMO was derived from a NiFe-layered double hydroxide (LDH) precursor for obtaining a high dispersion of metal oxides on the surface of the C_3N_4 matrix. The C_3N_4 is in the graphitic phase and the main crystalline phase in MMO is cubic NiO. The XPS analyses revealed the doping of Fe^(3+) in the dominant NiO phase and the existence of surface defects in the C3N4 matrix. The formation and decomposition kinetics of H_2O_2 on the MMO@C_3N_4 and the control samples, including bare MMO, C_3N_4 matrix, Ni- or Fe-loaded C_3N_4 and a simple mixture of MMO and C_3N_4, were investigated. The MMO@C_3N_4 composite produced 63 μmol L^(−1) of H_2O_2 in 90 min in acidic solution (pH 3) and exhibited a significantly higher rate of production for H_2O_2 relative to the control samples. The positive shift of the valence band in the composite and the enhanced water oxidation catalysis by incorporating the MMO improved the light-induced hole collection relative to the bare C_3N_4 and resulted in the enhanced H_2O_2 formation. The positively shifted conduction band in the composite also improved the selectivity of the two-electron reduction of molecular oxygen to H_2O_2

Gradient dopant profiling and spectral utilization of monolithic thin-film silicon photoelectrochemical tandem devices for solar water splitting

A cost-effective and earth-abundant photocathode based on hydrogenated amorphous silicon carbide (a-SiC:H) is demonstrated to split water into hydrogen and oxygen using solar energy. A monolithic a-SiC:H photoelectrochemical (PEC) cathode integrated with a hydrogenated amorphous silicon (a-SiC:H)/nano-crystalline silicon (nc-Si:H) double photovoltaic (PV) junction achieved a current density of −5.1 mA cm^(−2) at 0 V versus the reversible hydrogen electrode. The a-SiC:H photocathode used no hydrogen-evolution catalyst and the high current density was obtained using gradient boron doping. The growth of high quality nc-Si:H PV junctions in combination with optimized spectral utilization was achieved using glass substrates with integrated micro-textured photonic structures. The performance of the PEC/PV cathode was analyzed by simulations using Advanced Semiconductor Analysis (ASA) software

A scanning probe investigation of the role of surface motifs in the behavior of p-WSe_2 photocathodes

The spatial variation in the photoelectrochemical performance for the reduction of an aqueous one-electron redox couple, Ru(NH_3)_6^(3+/2+), and for the evolution of H_2(g) from 0.5 M H_2SO_4(aq) at the surface of bare or Pt-decorated p-type WSe_2 photocathodes has been investigated in situ using scanning photocurrent microscopy (SPCM). The measurements revealed significant differences in the charge-collection performance (quantified by the values of external quantum yields, Φ_(ext)) on various macroscopic terraces. Local spectral response measurements indicated a variation in the local electronic structure among the terraces, which was consistent with a non-uniform spatial distribution of sub-band-gap states within the crystals. The photoconversion efficiencies of Pt-decorated p-WSe_2 photocathodes were greater for the evolution of H_2(g) from 0.5 M H_2SO_4 than for the reduction of Ru(NH_3)_6^(3+/2+), and terraces that exhibited relatively low values of Φ_(ext) for the reduction of Ru(NH_3)_6^(3+/2+) could in some cases yield values of Φ_(ext) for the evolution of H_2(g) comparable to the values of Φ_(ext) yielded by the highest-performing terraces. Although the spatial resolution of the techniques used in this work frequently did not result in observation of the effect of edge sites on photocurrent efficiency, some edge effects were observed in the measurements; however the observed edge effects differed among edges, and did not appear to determine the performance of the electrodes

In situ probe of photocarrier dynamics in water-splitting hematite (α-Fe_(2)O_3) electrodes

The spectra and dynamics of photogenerated electrons and holes in excited hematite (α-Fe_(2)O_3) electrodes are investigated by transient absorption (from visible to infrared and from femto- to micro-seconds), bias-dependent differential absorption and Stark spectroscopy. Comparison of results from these techniques enables the assignment of the spectral signatures of photogenerated electrons and holes. Under the pulse illumination conditions of transient absorption (TA) measurement, the absorbed photon to electron conversion efficiency (APCE) of the films at 1.43 V (vs. reversible hydrogen electrode, RHE) is 0.69%, significantly lower than that at AM 1.5. TA kinetics shows that under these conditions, >98% of the photogenerated electrons and holes have recombined by 6 μs. Although APCE increases with more positive bias (from 0.90 to 1.43 V vs. RHE), the kinetics of holes up to 6 μs show negligible change, suggesting that the catalytic activity of the films is determined by holes with longer lifetimes