87 research outputs found
p-Cu2O-shell/n-TiO2-nanowire-core heterostucture photodiodes
This study reports the deposition of cuprous oxide [Cu2O] onto titanium dioxide [TiO2] nanowires [NWs] prepared on TiO2/glass templates. The average length and average diameter of these thermally oxidized and evaporated TiO2 NWs are 0.1 to 0.4 μm and 30 to 100 nm, respectively. The deposited Cu2O fills gaps between the TiO2 NWs with good step coverage to form nanoshells surrounding the TiO2 cores. The p-Cu2O/n-TiO2 NW heterostructure exhibits a rectifying behavior with a sharp turn-on at approximately 0.9 V. Furthermore, the fabricated p-Cu2O-shell/n-TiO2-nanowire-core photodiodes exhibit reasonably large photocurrent-to-dark-current contrast ratios and fast responses
Study on the continuous phase evolution and physical properties of gas-atomized high-entropy alloy powders
In this study, AlCoCrFeNi high entropy alloy (HEA) powders were fabricated by gas atomization process, and the effects of annealing heat treatment on phase evolution and mechanical properties were investigated. The as-atomized powders have pure BCC phase with a spherical shape and equal composition distribution, and then the FCC and sigma phase sequentially generated after annealing. The mechanical property such as hardness was evidently enhanced, which was caused by precipitation hardening effect. After the raw powders were annealed at 600 °C, the FCC (Al-Ni) phase began to precipitate, the its phase intensity raised with the annealing temperature. Then, the sigma phase (Fe-Cr) formed as the annealing temperature reached 800 °C. Both mechanical properties and lattice constant were influenced by heating effect. According to the results, the lattice became loose with the increasing temperature. In summary, the mechanical properties and phase constitutions of gas-atomized AlCoCrFeNi HEA powders can be adjusted via annealing process, resulting in precipitation hardening effect
High levels of serum macrophage migration inhibitory factor and interleukin 10 are associated with a rapidly fatal outcome in patients with severe sepsis
SummaryObjectivesThe aim of this study was to delineate the association between high macrophage migration inhibitory factor (MIF) and interleukin 10 (IL-10) levels in the early phase of sepsis and rapidly fatal outcome.MethodsOne hundred and fifty-three adult subjects with the main diagnosis of severe sepsis (including septic shock) admitted directly from the emergency department of two tertiary medical centers and one regional teaching hospital between January 2009 and December 2011, were included prospectively. MIF and IL-10 levels were measured and outcomes were analyzed by Cox regression analysis according to the following outcomes: rapidly fatal outcome (RFO, death within 48h), late fatal outcome (LFO, death between 48h and 28 days), and survival at 28 days.ResultsAmong the three outcome groups, IL-10 levels were significantly higher in the RFO group (p < 0.001) and no significant differences were seen between the LFO and survivor groups. After Cox regression analysis, each incremental elevation of 1000 pg/ml in both IL-10 and MIF was independently associated with RFO in patients with severe sepsis. Each incremental elevation of 1000 pg/ml in IL-10 increased the RFO risk by a factor of 1.312 (95% confidence interval 1.094–1.575; p=0.003); this was the most significant factor leading to RFO in patients with severe sepsis.ConclusionsPatients with RFO exhibited simultaneously high MIF and IL-10 levels in the early phase of severe sepsis. Incremental increases in both IL-10 and MIF levels were associated with RFO in this patient group, and of the two, IL-10 was the most significant factor linked to RFO
Anticancer drugs for the modulation of endoplasmic reticulum stress and oxidative stress
Prior research has demonstrated how the endoplasmic reticulum (ER) functions as a multifunctional organelle and as a well-orchestrated protein-folding unit. It consists of sensors which detect stress-induced unfolded/misfolded proteins and it is the place where protein folding is catalyzed with chaperones. During this folding process, an immaculate disulfide bond formation requires an oxidized environment provided by the ER. Protein folding and the generation of reactive oxygen species (ROS) as a protein oxidative byproduct in ER are crosslinked. An ER stress-induced response also mediates the expression of the apoptosis-associated gene C/EBP-homologous protein (CHOP) and death receptor 5 (DR5). ER stress induces the upregulation of tumor necrosis factor-related apoptosis inducing ligand (TRAIL) receptor and opening new horizons for therapeutic research. These findings can be used to maximize TRAIL-induced apoptosis in xenografted mice. This review summarizes the current understanding of the interplay between ER stress and ROS. We also discuss how damage-associated molecular patterns (DAMPs) function as modulators of immunogenic cell death and how natural products and drugs have shown potential in regulating ER stress and ROS in different cancer cell lines. Drugs as inducers and inhibitors of ROS modulation may respectively exert inducible and inhibitory effects on ER stress and unfolded protein response (UPR). Reconceptualization of the molecular crosstalk among ROS modulating effectors, ER stress, and DAMPs will lead to advances in anticancer therapy
The global response: How cities and provinces around the globe tackled Covid-19 outbreaks in 2021
Background: Tackling the spread of COVID-19 remains a crucial part of ending the pandemic. Its highly contagious nature and constant evolution coupled with a relative lack of immunity make the virus difficult to control. For this, various strategies have been proposed and adopted including limiting contact, social isolation, vaccination, contact tracing, etc. However, given the heterogeneity in the enforcement of these strategies and constant fluctuations in the strictness levels of these strategies, it becomes challenging to assess the true impact of these strategies in controlling the spread of COVID-19.Methods: In the present study, we evaluated various transmission control measures that were imposed in 10 global urban cities and provinces in 2021 Bangkok, Gauteng, Ho Chi Minh City, Jakarta, London, Manila City, New Delhi, New York City, Singapore, and Tokyo.Findings: Based on our analysis, we herein propose the population-level Swiss cheese model for the failures and pit-falls in various strategies that each of these cities and provinces had. Furthermore, whilst all the evaluated cities and provinces took a different personalized approach to managing the pandemic, what remained common was dynamic enforcement and monitoring of breaches of each barrier of protection. The measures taken to reinforce the barriers were adjusted continuously based on the evolving epidemiological situation.Interpretation: How an individual city or province handled the pandemic profoundly affected and determined how the entire country handled the pandemic since the chain of transmission needs to be broken at the very grassroot level to achieve nationwide control
p-Cu<sub>2</sub>O-shell/n-TiO<sub>2</sub>-nanowire-core heterostucture photodiodes
<p>Abstract</p> <p>This study reports the deposition of cuprous oxide [Cu<sub>2</sub>O] onto titanium dioxide [TiO<sub>2</sub>] nanowires [NWs] prepared on TiO<sub>2</sub>/glass templates. The average length and average diameter of these thermally oxidized and evaporated TiO<sub>2 </sub>NWs are 0.1 to 0.4 μm and 30 to 100 nm, respectively. The deposited Cu<sub>2</sub>O fills gaps between the TiO<sub>2 </sub>NWs with good step coverage to form nanoshells surrounding the TiO<sub>2 </sub>cores. The p-Cu<sub>2</sub>O/n-TiO<sub>2 </sub>NW heterostructure exhibits a rectifying behavior with a sharp turn-on at approximately 0.9 V. Furthermore, the fabricated p-Cu<sub>2</sub>O-shell/n-TiO<sub>2</sub>-nanowire-core photodiodes exhibit reasonably large photocurrent-to-dark-current contrast ratios and fast responses.</p
Bioinspired Durable Superhydrophobic Surface from a Hierarchically Wrinkled Nanoporous Polymer
Inspired by complex multifunctional leaves, in this study, we created robust hierarchically wrinkled nanoporous polytetrafluoroethene (PTFE) surfaces that exhibit superhydrophobic properties by combination of PTFE micellization and spontaneous surface wrinkling on a commercially available thermoretractable polystyrene (PS) sheet. A PTFE dispersion was coated onto the PS sheet, followed by thermal treatment to remove the surfactants surrounding the PTFE particles, and surface wrinkling was induced through a dynamic thermal contraction process. Thermally induced contraction from the PS sheet provided the driving force for developing and stabilizing micrometer-sized wrinkle formation, whereas the nanometer-sized PTFE particle aggregation formed a rigid nanoporous film, providing its intrinsic hydrophobic character. By combining the hierarchical interfacial structure and chemical composition, hierarchically wrinkled nanoporous PTFE surfaces were fabricated, which exhibited extremely high water repellence (water contact angle of ∼167°) and a water rolling-off angle lower than 5°. The wrinkled patterns could intimately bind the nanoporous PTFE layer through enhanced adhesion from their curved surface and viscous liquid surfactants, making these surfaces mechanically robust and offering potentially extendable alternatives with self-cleaning, antifouling, and drag-reducing properties
Epitaxial structure having low defect density
An epitaxial structure having a low defect density includes: a base layer; a first epitaxial layer having a plurality of concentrated defect groups, and an epitaxial surface that has a plurality of first recesses corresponding in position to the concentrated defect groups, the sizes of the first recesses being close to each other; and a plurality of defect-termination blocks respectively and filling the first recesses and having polished surfaces. The defect-termination blocks are made of a material which is different in removal rate from that of the first epitaxial layer. The polished surfaces are substantially flush with the epitaxial surface so that the first epitaxial layer has a substantially planarized crystal growth surface
- …