Thermal properties of Ti-doped Cu-Zn soft ferrites used as thermally actuated material for magnetizing superconductors

A great majority of widely used ferrite ceramics exhibit a relatively high temperature of order–disorder phase transition in their magnetic subsystem. For applications related to the magnetization process of superconductors, however, a low value of T c is required. Here we report and analyze in detail the thermal properties of bulk Ti-doped Cu–Zn ferrite ceramics Cu0.3Zn0.7Ti0.04Fe1.96O4 and Mg0.15Cu0.15Zn0.7Ti0.04Fe1.96O4. They are characterized by a Curie temperature in the range 120–170 K and a maximum DC magnetic susceptibility exceeding 20 for the Cu0.3Zn0.7Ti0.04Fe1.96O4 material. The temperature dependence of both the specific heat C p and of the thermal conductivity κ, determined between 2 and 300 K, are found not to exhibit any peculiar feature at the magnetic transition temperature. The low-temperature dependence of both κ and the mean free path of phonons suggests a mesoscopic fractal structure of the grains. From the measured data, the characteristics of thermally actuated waves are estimated. The low magnetic phase transition temperature and suitable thermal parameters make the investigated ferrite ceramics applicable as magnetic wave producers in devices designed for magnetization of high-temperature superconductors.We thank the University of Liège (ULg) and the Ministry of Higher Education of Communauté Française de Belgique for a research grant Action de Recherches Concertées (ARC 11/16-03). We thank Alexander Krivchikov for fruitful discussions and Oksana Mendiuk for taking SEM images. This work is part of a collaboration programme between the FRS-FNRS (Belgium) and the PAS (Polish Academy of Sciences).This is the author accepted manuscript. The final version is available from the Institute of Physics via http://dx.doi.org/10.1088/0022-3727/49/12/12500

Dialkyldithiophosphate Acids (HDDPs) as Effective Lubricants of Sol–Gel Titania Coatings in Technical Dry Friction Conditions

The goal of this study was the investigation of the effectiveness of dialkyldithiophosphate acids (HDDPs) films in improving the tribological properties of thin, sol– gel derived titania coatings. Amorphous, anatase, and rutile titania coatings were obtained using sol–gel dip–coating deposition after treatment at 100, 500, and 1,000 C, respectively. Titania coatings were then modified from the liquid phase by HDDPs acids having dodecyl-(C12), tetradecyl-(C14), and hexadecyl-(C16) alkyl chains deposited by dip–coating (DC) and Langmuir–Blodgett (LB) methods. The influence of the deposition procedure, the length of the HDDPs alkyl chain and the type of titania substrate on the surface morphology and tribological properties were studied. It was found, using wetting contact angle measurements, that these modifications of titania coatings decrease the surface free energy and increase its hydrophobicity. The surface topography imaged by Atomic force microscopy (AFM), exhibit island-like or agglomerate features for the DC deposition method, while smooth topographies were observed for LB depositions. Tribological tests were conducted by means of a microtribometer operating in the normal load range 30–100 mN. An enhancement of tribological properties was observed upon modification, as compared to unmodified titania

Suitable thicknesses of base metal and interlayer, and evolution of phases for Ag/Sn/Ag transient liquid-phase joints used for power die attachment

Both real Si insulated gate bipolar transistors (IGBT) with conventional Ni\Ag metallization and a dummy Si die with thickened Ni\Ag metallization have been bonded on Ag foils electroplated with 2.7 m and 6.8 m thick Sn as an interlayer at 250ºC for 0 min, 40 min and 640 min. From microstructure characterization of the resulting joints, suitable thicknesses are suggested for the Ag base metal and the Sn interlayer for Ag/Sn/Ag transient liquid phase (TLP) joints used in power die attachment, and the diffusivities of Ag and Sn in the Ag phase are extracted. In combination with the kinetic constants of Ag3Sn growth and diffusivities of Ag and Sn in Ag reported in the literature, the extracted diffusivities of Ag and Sn in Ag phase are also used to simulate and predict the diffusion-controlled growth and evolution of phases in the Ag/Sn/Ag TLP joints during an extended bonding process and in service

Can ultrasound be used to stimulate nerve tissue?

BACKGROUND: The stimulation of nerve or cortical tissue by magnetic induction is a relatively new tool for the non-invasive study of the brain and nervous system. Transcranial magnetic stimulation (TMS), for example, has been used for the functional mapping of the motor cortex and may have potential for treating a variety of brain disorders. METHODS AND RESULTS: A new method of stimulating active tissue is proposed by propagating ultrasound in the presence of a magnetic field. Since tissue is conductive, particle motion created by an ultrasonic wave will induce an electric current density generated by Lorentz forces. An analytical derivation is given for the electric field distribution induced by a collimated ultrasonic beam. An example shows that peak electric fields of up to 8 V/m appear to be achievable at the upper range of diagnostic intensities. This field strength is about an order of magnitude lower than fields typically associated with TMS; however, the electric field gradients induced by ultrasound can be quite high (about 60 kV/m(2 )at 4 MHz), which theoretically play a more important role in activation than the field magnitude. The latter value is comparable to TMS-induced gradients. CONCLUSION: The proposed method could be used to locally stimulate active tissue by inducing an electric field in regions where the ultrasound is focused. Potential advantages of this method compared to TMS is that stimulation of cortical tissue could be highly localized as well as achieved at greater depths in the brain than is currently possible with TMS

Cough quality in children: a comparison of subjective vs. bronchoscopic findings

BACKGROUND: Cough is the most common symptom presenting to doctors. The quality of cough (productive or wet vs dry) is used clinically as well as in epidemiology and clinical research. There is however no data on the validity of cough quality descriptors. The study aims were to compare (1) cough quality (wet/dry and brassy/non-brassy) to bronchoscopic findings of secretions and tracheomalacia respectively and, (2) parent's vs clinician's evaluation of the cough quality (wet/dry). METHODS: Cough quality of children (without a known underlying respiratory disease) undergoing elective bronchoscopy was independently evaluated by clinicians and parents. A 'blinded' clinician scored the secretions seen at bronchoscopy on pre-determined criteria and graded (1 to 6). Kappa (K) statistics was used for agreement, and inter-rater and intra-rater agreement examined on digitally recorded cough. A receiver operating characteristic (ROC) curve was used to determine if cough quality related to amount of airway secretions present at bronchoscopy. RESULTS: Median age of the 106 children (62 boys, 44 girls) enrolled was 2.6 years (IQR 5.7). Parent's assessment of cough quality (wet/dry) agreed with clinicians' (K = 0.75, 95%CI 0.58–0.93). When compared to bronchoscopy (bronchoscopic secretion grade 4), clinicians' cough assessment had the highest sensitivity (0.75) and specificity (0.79) and were marginally better than parent(s). The area under the ROC curve was 0.85 (95%CI 0.77–0.92). Intra-observer (K = 1.0) and inter-clinician agreement for wet/dry cough (K = 0.88, 95%CI 0.82–0.94) was very good. Weighted K for inter-rater agreement for bronchoscopic secretion grades was 0.95 (95%CI 0.87–1). Sensitivity and specificity for brassy cough (for tracheomalacia) were 0.57 and 0.81 respectively. K for both intra and inter-observer clinician agreement for brassy cough was 0.79 (95%CI 0.73–0.86). CONCLUSIONS: Dry and wet cough in children, as determined by clinicians and parents has good clinical validity. Clinicians should however be cognisant that children with dry cough may have minimal to mild airway secretions. Brassy cough determined by respiratory physicians is highly specific for tracheomalacia

Thermopile detector of light ellipticity

Polarimetric imaging is widely used in applications from material analysis to biomedical diagnostics, vision and astronomy. The degree of circular polarization, or light ellipticity, is associated with the S3 Stokes parameter which is defined as the difference in the intensities of the left- and right-circularly polarized components of light. Traditional way of determining this parameter relies on using several external optical elements, such as polarizers and wave plates, along with conventional photodetectors, and performing at least two measurements to distinguish left- and right-circularly polarized light components. Here we theoretically propose and experimentally demonstrate a thermopile photodetector element that provides bipolar voltage output directly proportional to the S3 Stokes parameter of the incident light.ope

Giant Electroresistance in Edge Metal-Insulator-Metal Tunnel Junctions Induced by Ferroelectric Fringe Fields

An enormous amount of research activities has been devoted to developing new types of non-volatile memory devices as the potential replacements of current flash memory devices. Theoretical device modeling was performed to demonstrate that a huge change of tunnel resistance in an Edge Metal-Insulator-Metal (EMIM) junction of metal crossbar structure can be induced by the modulation of electric fringe field, associated with the polarization reversal of an underlying ferroelectric layer. It is demonstrated that single three-terminal EMIM/Ferroelectric structure could form an active memory cell without any additional selection devices. This new structure can open up a way of fabricating all-thin-film-based, high-density, high-speed, and low-power non-volatile memory devices that are stackable to realize 3D memory architectureope

Conformational changes and protein stability of the pro-apoptotic protein Bax

Pro-apoptotic Bax is a soluble and monomeric protein under normal physiological conditions. Upon its activation substantial structural rearrangements occur: The protein inserts into the mitochondrial outer membrane and forms higher molecular weight oligomers. Subsequently, the cells can undergo apoptosis. In our studies, we focused on the structural rearrangements of Bax during oligomerization and on the protein stability. Both protein conformations exhibit high stability against thermal denaturation, chemically induced unfolding and proteolytic processing. The oligomeric protein is stable up to 90 °C as well as in solutions of 8 M urea or 6 M guanidinium hydrochloride. Helix 9 appears accessible in the monomer but hidden in the oligomer assessed by proteolysis. Tryptophan fluorescence indicates that the environment of the C-terminal protein half becomes more apolar upon oligomerization, whereas the loop region between helices 1 and 2 gets solvent exposed

Spatiotemporal cluster patterns of hand, foot, and mouth disease at the county level in Mainland China, 2008-2012

Background: Hand, foot, and mouth disease (HFMD) is known to be a highly contagious childhood illness. In recent years, the number of reported cases of HFMD has significantly increased in mainland China. This study aims at the epidemiological features, spatiotemporal patterns of HMFD at the county/district level in mainland China. Methods: Data on reported HFMD cases for each county from 1 January 2008 to 31 December 2012 were obtained from the Chinese Center for Disease Control and Prevention. Cluster analysis, spatial autocorrelation, and retrospective scan methods were used to explore the spatiotemporal patterns of the disease. Results: The annual incidences varied greatly among the counties, ranging from 0 to 74.31‰with the median of 5.42‰ (interquartile range: 1.54‰–13.55‰) during 2008–2012 in mainland China. Counties close to provincial capital cities generally had higher incidences than rural counties. A seasonal distribution was observed between the northern and southern China, of which dual epidemic were shown in southern China and usually only one in northern China. Based on the global and local spatial autocorrelation analysis, we found that the spatial distribution of HFMD was presented a significant clustering pattern for each year (P \u3c 0.001), and hotspots of the disease were mostly distributed in coastal provinces of China. The retrospective scan statistic further identified the dynamics of spatiotemporal clustering areas of the disease, which were mainly distributed in the counties of eastern and southern China, as well as provincial capitals and their surrounding counties. Conclusions: The spatiotemporal clustering areas of the disease identified in this way were relatively stable, and imminent public health planning and resource allocation should be focused within those areas