30,576 research outputs found
Surfactant-assisted liquefaction of particulate carbonaceous substances
A slurry of carbonaceous particles such as coal containing an oil soluble polar substituted oleophilic surfactant, suitably an amine substituted long chain hydrocarbon, is liquefied at high temperature and high hydrogen presence. The pressure of surfactant results in an increase in yield and the conversion product contains a higher proportion of light and heavy oils and less asphaltene than products from other liquefaction processes
Coal desulfurization
Organic sulfur is removed from coal by treatment with an organic solution of iron pentacarbonyl. Organic sulfur compounds can be removed by reaction of the iron pentacarbonyl with coal to generate CO and COS off-gases. The CO gas separated from COS can be passed over hot iron fillings to generate iron pentacarbonyl
Numerical studies of interacting vortices
To get a basic understanding of the physics of flowfields modeled by vortex filaments with finite vortical cores, systematic numerical studies of the interactions of two dimensional vortices and pairs of coaxial axisymmetric circular vortex rings were made. Finite difference solutions of the unsteady incompressible Navier-Stokes equations were carried out using vorticity and stream function as primary variables. Special emphasis was placed on the formulation of appropriate boundary conditions necessary for the calculations in a finite computational domain. Numerical results illustrate the interaction of vortex filaments, demonstrate when and how they merge with each other, and establish the region of validity for an asymptotic analysis
Multi-chord fiber-coupled interferometer with a long coherence length laser
This paper describes a 561 nm laser heterodyne interferometer that provides
time-resolved measurements of line-integrated plasma electron density within
the range of 10^15-10^18 cm^(-2). Such plasmas are produced by railguns on the
Plasma Liner Experiment (PLX), which aims to produce \mu s-, cm-, and
Mbar-scale plasmas through the merging of thirty plasma jets in a spherically
convergent geometry. A long coherence length, 320 mW laser allows for a strong,
sub-fringe phase-shift signal without the need for closely-matched probe and
reference path lengths. Thus only one reference path is required for all eight
probe paths, and an individual probe chord can be altered without altering the
reference or other probe path lengths. Fiber-optic decoupling of the probe
chord optics on the vacuum chamber from the rest of the system allows the probe
paths to be easily altered to focus on different spatial regions of the plasma.
We demonstrate that sub-fringe resolution capability allows the interferometer
to operate down to line-integrated densities of order 10^15 cm^(-2).Comment: submitted to Rev. Sci. Instrum. (2011
Crude oil desulfurization
High sulfur crude oil is desulfurized by a low temperature (25-80 C.) chlorinolysis at ambient pressure in the absence of organic solvent or diluent but in the presence of water (water/oil=0.3) followed by a water and caustic wash to remove sulfur and chlorine containing reaction products. The process described can be practiced at a well site for the recovery of desulfurized oil used to generate steam for injection into the well for enhanced oil recovery
Anisotropic superconducting properties of aligned SmLaFeAsOF microcrystalline powder
The SmLaFeAsOF compound is a quasi-2D
layered superconductor with a superconducting transition temperature T = 52
K. Due to the Fe spin-orbital related anisotropic exchange coupling
(antiferromagnetic or ferromagnetic fluctuation), the tetragonal
microcrystalline powder can be aligned at room temperature using the
field-rotation method where the tetragonal -plane is parallel to the
aligned magnetic field B and -axis along the rotation axis.
Anisotropic superconducting properties with anisotropic diamagnetic ratio
2.4 + 0.6 was observed from low field susceptibility
(T) and magnetization M(B). The anisotropic low-field phase diagram
with the variation of lower critical field gives a zero-temperature penetration
depth (0) = 280 nm and (0) = 120 nm. The magnetic
fluctuation used for powder alignment at 300 K may be related with the pairing
mechanism of superconductivity at lower temperature.Comment: 4 pages, 6 figure
Acute kidney injury in the elderly: predisposition to chronic kidney disease and vice versa.
There have been considerable advances in the past few years in our understanding of how chronic kidney disease (CKD) predisposes to acute kidney injury (AKI) and vice versa. This review shows, however, that few studies have focused on the elderly or conducted stratified analysis by age. It does appear that elderly patients with estimated glomerular filtration rate (eGFR) 45-59 ml/min/1.73 m(2) are at higher risk for AKI compared with their counterparts with eGFR >60 ml/min/1.73 m(2). This is a similar relationship to that seen in younger patients, although effect size appears smaller. As the incidence of AKI has been increasing over the past several years, the proportion of elderly patients surviving after AKI has also been increasing. Since AKI heightens the risk for the development and acceleration of CKD, this implies significant public health concerns with regard to the absolute number of elderly persons developing incident CKD
Coal desulfurization process
A method for chlorinolysis of coal is an organic solvent at a moderate temperautre and atmospheric pressure has been proven to be effective in removing sulfur, particularly the organic sulfur, from coal. Chlorine gas is bubbled through a slurry of moist coal in chlorinated solvent. The chlorinated coal is separated, hydrolyzed and the dechlorinated. Preliminary results of treating a high sulfutr (4.77%S) bituminous coal show that up to 70% organic sulfur, 90% hyritic sulfur and 76% total sulfur can be removed. The treated coal is dechlorinated by heating at 500 C. The presence of moisture helps to remove organic sulfur
New urea-absorbing polymers for artificial kidney machines
Etherified polymer is made from modified cellulose derivative which is reacted with periodate. It will absorb 2 grams of urea per 100 grams of polymer. Indications are that polymers could be used to help remove uremic wastes in artificial kidneys, or they could be administered orally as therapy for uremia
- …