61 research outputs found

    Supersonic combustion engine testbed, heat lightning

    Get PDF
    The design of a supersonic combustion engine testbed (SCET) aircraft is presented. The hypersonic waverider will utilize both supersonic combustion ramjet (SCRAMjet) and turbofan-ramjet engines. The waverider concept, system integration, electrical power, weight analysis, cockpit, landing skids, and configuration modeling are addressed in the configuration considerations. The subsonic, supersonic and hypersonic aerodynamics are presented along with the aerodynamic stability and landing analysis of the aircraft. The propulsion design considerations include: engine selection, turbofan ramjet inlets, SCRAMjet inlets and the SCRAMjet diffuser. The cooling requirements and system are covered along with the topics of materials and the hydrogen fuel tanks and insulation system. A cost analysis is presented and the appendices include: information about the subsonic wind tunnel test, shock expansion calculations, and an aerodynamic heat flux program

    Chronic hindlimb ischemia impairs functional vasodilation and vascular reactivity in mouse feed arteries

    Get PDF
    Vasodilation of lower leg arterioles is impaired in animal models of chronic peripheral ischemia. In addition to arterioles, feed arteries are a critical component of the vascular resistance network, accounting for as much as 50% of the pressure drop across the arterial circulation. Despite the critical importance of feed arteries in blood flow control, the impact of ischemia on feed artery vascular reactivity is unknown. At 14 days following unilateral resection of the femoral–saphenous artery–vein pair, functional vasodilation of the profunda femoris artery was severely impaired, 11 ± 9 versus 152 ± 22%. Although endothelial and smooth muscle-dependent vasodilation were both impaired in ischemic arteries compared to control arteries (Ach: 40 ± 14 versus 81 ± 11%, SNP: 43 ± 12 versus and 85 ± 11%), the responses to acetylcholine and sodium nitroprusside were similar, implicating impaired smooth muscle-dependent vasodilation. Conversely, vasoconstriction responses to norepinephrine were not different between ischemic and control arteries, −68 ± 3 versus −66 ± 3%, indicating that smooth muscle cells were functional following the ischemic insult. Finally, maximal dilation responses to acetylcholine, ex vivo, were significantly impaired in the ischemic artery compared to control, 71 ± 9 versus 97 ± 2%, despite a similar generation of myogenic tone to the same intravascular pressure (80 mmHg). These data indicate that ischemia impairs feed artery vasodilation by impairing the responsiveness of the vascular wall to vasodilating stimuli. Future studies to examine the mechanistic basis for the impact of ischemia on vascular reactivity or treatment strategies to improve vascular reactivity following ischemia could provide the foundation for an alternative therapeutic paradigm for peripheral arterial occlusive disease

    Direct CP violation and the ΔI=1/2 rule in K→ππ decay from the standard model

    Get PDF
    We present a lattice QCD calculation of the ΔI=1/2, K→ππ decay amplitude A0 and ϵ′, the measure of direct CP violation in K→ππ decay, improving our 2015 calculation [1] of these quantities. Both calculations were performed with physical kinematics on a 323×64 lattice with an inverse lattice spacing of a-1=1.3784(68)  GeV. However, the current calculation includes nearly 4 times the statistics and numerous technical improvements allowing us to more reliably isolate the ππ ground state and more accurately relate the lattice operators to those defined in the standard model. We find Re(A0)=2.99(0.32)(0.59)×10-7  GeV and Im(A0)=-6.98(0.62)(1.44)×10-11  GeV, where the errors are statistical and systematic, respectively. The former agrees well with the experimental result Re(A0)=3.3201(18)×10-7  GeV. These results for A0 can be combined with our earlier lattice calculation of A2 [2] to obtain Re(ϵ′/ϵ)=21.7(2.6)(6.2)(5.0)×10-4, where the third error represents omitted isospin breaking effects, and Re(A0)/Re(A2)=19.9(2.3)(4.4). The first agrees well with the experimental result of Re(ϵ′/ϵ)=16.6(2.3)×10-4. A comparison of the second with the observed ratio Re(A0)/Re(A2)=22.45(6), demonstrates the standard model origin of this “ΔI=1/2 rule” enhancement.We present a lattice QCD calculation of the ΔI=1/2\Delta I=1/2, KππK\to\pi\pi decay amplitude A0A_0 and ε\varepsilon', the measure of direct CP-violation in KππK\to\pi\pi decay, improving our 2015 calculation of these quantities. Both calculations were performed with physical kinematics on a 323×6432^3\times 64 lattice with an inverse lattice spacing of a1=1.3784(68)a^{-1}=1.3784(68) GeV. However, the current calculation includes nearly four times the statistics and numerous technical improvements allowing us to more reliably isolate the ππ\pi\pi ground-state and more accurately relate the lattice operators to those defined in the Standard Model. We find Re(A0)=2.99(0.32)(0.59)×107{\rm Re}(A_0)=2.99(0.32)(0.59)\times 10^{-7} GeV and Im(A0)=6.98(0.62)(1.44)×1011{\rm Im}(A_0)=-6.98(0.62)(1.44)\times 10^{-11} GeV, where the errors are statistical and systematic, respectively. The former agrees well with the experimental result Re(A0)=3.3201(18)×107{\rm Re}(A_0)=3.3201(18)\times 10^{-7} GeV. These results for A0A_0 can be combined with our earlier lattice calculation of A2A_2 to obtain Re(ε/ε)=21.7(2.6)(6.2)(5.0)×104{\rm Re}(\varepsilon'/\varepsilon)=21.7(2.6)(6.2)(5.0) \times 10^{-4}, where the third error represents omitted isospin breaking effects, and Re(A0)(A_0)/Re(A2)=19.9(2.3)(4.4)(A_2) = 19.9(2.3)(4.4). The first agrees well with the experimental result of Re(ε/ε)=16.6(2.3)×104{\rm Re}(\varepsilon'/\varepsilon)=16.6(2.3)\times 10^{-4}. A comparison of the second with the observed ratio Re(A0)/(A_0)/Re(A2)=22.45(6)(A_2) = 22.45(6), demonstrates the Standard Model origin of this "ΔI=1/2\Delta I = 1/2 rule" enhancement

    Lattice determination of I=0 and 2 ππ scattering phase shifts with a physical pion mass

    Get PDF
    Phase shifts for s-wave ππ scattering in both the I=0 and I=2 channels are determined from a lattice QCD calculation performed on 741 gauge configurations obeying G-parity boundary conditions with a physical pion mass and lattice size of 323×64. These results support our recent 2021 study of direct CP violation in K→ππ decay, improving our earlier 2015 calculation. The phase shifts are determined for both stationary and moving ππ systems, at three (I=0) and four (I=2) different total momenta. We implement several ππ interpolating operators including a scalar bilinear “σ” operator and paired single-pion bilinear operators with the constituent pions carrying various relative momenta. Several techniques, including correlated fitting and a bootstrap determination of p-values have been used to refine the results and a comparison with the generalized eigenvalue problem method is given. A detailed systematic error analysis is performed which allows phase shift results to be presented at a fixed energy

    A Novel Non-Lens βγ−Crystallin and Trefoil Factor Complex from Amphibian Skin and Its Functional Implications

    Get PDF
    In vertebrates, non-lens betagamma-crystallins are widely expressed in various tissues, but their functions are unknown. The molecular mechanisms of trefoil factors, initiators of mucosal healing and being greatly involved in tumorigenesis, have remained elusive.A naturally existing 72-kDa complex of non-lens betagamma-crystallin (alpha-subunit) and trefoil factor (beta-subunit), named betagamma-CAT, was identified from frog Bombina maxima skin secretions. Its alpha-subunit and beta-subunit (containing three trefoil factor domains), with a non-covalently linked form of alphabeta(2), show significant sequence homology to ep37 proteins, a group of non-lens betagamma-crystallins identified in newt Cynops pyrrhogaster and mammalian trefoil factors, respectively. betagamma-CAT showed potent hemolytic activity on mammalian erythrocytes. The specific antiserum against each subunit was able to neutralize its hemolytic activity, indicating that the two subunits are functionally associated. betagamma-CAT formed membrane pores with a functional diameter about 2.0 nm, leading to K(+) efflux and colloid-osmotic hemolysis. High molecular weight SDS-stable oligomers (>240-kDa) were detected by antibodies against the alpha-subunit with Western blotting. Furthermore, betagamma-CAT showed multiple cellular effects on human umbilical vein endothelial cells. Low dosages of betagamma-CAT (25-50 pM) were able to stimulate cell migration and wound healing. At high concentrations, it induced cell detachment (EC(50) 10 nM) and apoptosis. betagamma-CAT was rapidly endocytosed via intracellular vacuole formation. Under confocal microscope, some of the vacuoles were translocated to nucleus and partially fused with nuclear membrane. Bafilomycin A1 (a specific inhibitor of the vacuolar-type ATPase) and nocodazole (an agent of microtuble depolymerizing), while inhibited betagamma-CAT induced vacuole formation, significantly inhibited betagamma-CAT induced cell detachment, suggesting that betagamma-CAT endocytosis is important for its activities.These findings illustrate novel cellular functions of non-lens betagamma-cyrstallins and action mechanism via association with trefoil factors, serving as clues for investigating the possible occurrence of similar molecules and action mechanisms in mammals

    Turbine Tip and Shroud Heat Transfer and Loading, Part B: Comparisons Between Prediction and Experiment Including Unsteady Effects,”

    No full text
    ABSTRACT Turbine tip and shroud flow and heat transfer are some of the most complex, yet important, issues in turbine design. Most of the work performed to date has been performed in linear cascades and has investigated such items as the effect of tip geometries and turbulence on tip and shroud pressure and heat transfer. There have been very few full annulus or rotating measurements in the literature. Experimental measurements have been made on a single stage high pressure turbine at the US Air Force Turbine Research Facility (TRF) to aid in the understanding of this phenomena. The TRF is a full scale, rotating rig that operates at matched flow conditions to the true turbine environment. Heat flux measurements were acquired with both Pyrex insert strip and button gauges while the pressure measurements were taken with surface mounted Kulite pressure transducers. This paper presents one of the first full rotating, simultaneous pressure and heat transfer measurements to be taken in the turbine tip shroud region. These measurements provide some of the details needed for accurately quantifying the true flow condition in this complex flow regime. Comparisons between the present data and the existing 2D cascade data were made. This investigation quantified the effects of Reynolds number, inlet temperature, turbine pressure ratio and inlet flow temperature profiles. This provides a benchmark data set for validation of numerical codes
    corecore