Modelling and directionally encoding the acoustics of a room

Geometrical methods are often used to model the acoustic properties of a room, but are valid only for high frequencies. At low frequencies. diffraction and the effects of room modes cannot be neglected. A method for modelling the two-dimensional propagation of sound within an enclosed room is presented which encompasses both of these particular properties by making use of a digital waveguide model

Waveguide physical modeling of vocal tract acoustics: flexible formant bandwidth control from increased model dimensionality

Digital waveguide physical modeling is often used as an efficient representation of acoustical resonators such as the human vocal tract. Building on the basic one-dimensional (1-D) Kelly-Lochbaum tract model, various speech synthesis techniques demonstrate improvements to the wave scattering mechanisms in order to better approximate wave propagation in the complex vocal system. Some of these techniques are discussed in this paper, with particular reference to an alternative approach in the form of a two-dimensional waveguide mesh model. Emphasis is placed on its ability to produce vowel spectra similar to that which would be present in natural speech, and how it improves upon the 1-D model. Tract area function is accommodated as model width, rather than translated into acoustic impedance, and as such offers extra control as an additional bounding limit to the model. Results show that the two-dimensional (2-D) model introduces approximately linear control over formant bandwidths leading to attainable realistic values across a range of vowels. Similarly, the 2-D model allows for application of theoretical reflection values within the tract, which when applied to the 1-D model result in small formant bandwidths, and, hence, unnatural sounding synthesized vowels

Rhinologic changes in Wegener's granulomatosis

Twenty-eight patients with a clinical diagnosis of sinonasal Wegener's granulomatosis were referred for imaging during the period 1990-2001. Of these, 10 had clinical symptoms and signs confined to the nose and sinuses and 18 had classical systemic Wegener's. The computed tomography (CT) and magnetic resonance (MRI) scans of the series were reviewed by a panel of one otolaryngologist and two radiologists. From the total of 28 patients, 85.7 per cent showed non-specific mucosal thickening in the nasal cavity or paranasal sinuses, 75 per cent showed evidence of bone destruction, and 50 per cent new bone formation in the walls of the sinus cavities. In addition the orbit was affected in 30 per cent of patients.The diagnosis of systemic Wegener's granulomatosis is made clinically but the condition may present characteristic features on imaging by CT and MRI. In a patient without a history of previous sinonasal surgery, a combination of bone destruction and new bone formation on CT is virtually diagnostic of Wegener's especially when accompanied on MRI by a fat signal from the sclerotic sinus wall. These changes are important diagnostically in localized sinonasal Wegener's granulomatosis where the clinical diagnosis may be uncertain and the cANCA test can be negative

HAT-P-30b: A Transiting Hot Jupiter on a Highly Oblique Orbit

We report the discovery of HAT-P-30b, a transiting exoplanet orbiting the V = 10.419 dwarf star GSC 0208-00722. The planet has a period P = 2.810595 ± 0.000005 days, transit epoch Tc = 2455456.46561 ± 0.00037 (BJD), and transit duration 0.0887 ± 0.0015 days. The host star has a mass of 1.24 ± 0.04 M_⊙, radius of 1.21 ± 0.05 R_⊙, effective temperature of 6304 ± 88 K, and metallicity [Fe/H] = +0.13 ± 0.08. The planetary companion has a mass of 0.711 ± 0.028 M J and radius of 1.340 ± 0.065 R J yielding a mean density of 0.37 ± 0.05 g cm^(–3). We also present radial velocity measurements that were obtained throughout a transit that exhibit the Rossiter-McLaughlin effect. By modeling this effect, we measure an angle of λ = 73.°5 ± 9.°0 between the sky projections of the planet's orbit normal and the star's spin axis. HAT-P-30b represents another example of a close-in planet on a highly tilted orbit, and conforms to the previously noted pattern that tilted orbits are more common around stars with T_(eff*) ≳ 6250 K

When it Pays to Rush: Interpreting Morphogen Gradients Prior to Steady-State

During development, morphogen gradients precisely determine the position of gene expression boundaries despite the inevitable presence of fluctuations. Recent experiments suggest that some morphogen gradients may be interpreted prior to reaching steady-state. Theoretical work has predicted that such systems will be more robust to embryo-to-embryo fluctuations. By analysing two experimentally motivated models of morphogen gradient formation, we investigate the positional precision of gene expression boundaries determined by pre-steady-state morphogen gradients in the presence of embryo-to-embryo fluctuations, internal biochemical noise and variations in the timing of morphogen measurement. Morphogens that are direct transcription factors are found to be particularly sensitive to internal noise when interpreted prior to steady-state, disadvantaging early measurement, even in the presence of large embryo-to-embryo fluctuations. Morphogens interpreted by cell-surface receptors can be measured prior to steady-state without significant decrease in positional precision provided fluctuations in the timing of measurement are small. Applying our results to experiment, we predict that Bicoid, a transcription factor morphogen in Drosophila, is unlikely to be interpreted prior to reaching steady-state. We also predict that Activin in Xenopus and Nodal in zebrafish, morphogens interpreted by cell-surface receptors, can be decoded in pre-steady-state.Comment: 18 pages, 3 figure

Feasibility of reduced gravity experiments involving quiescent, uniform particle cloud combustion

The study of combustible particle clouds is of fundamental scientific interest as well as a practical concern. The principal scientific interests are the characteristic combustion properties, especially flame structure, propagation rates, stability limits, and the effects of stoichiometry, particle type, transport phenomena, and nonadiabatic processes on these properties. The feasibility tests for the particle cloud combustion experiment (PCCE) were performed in reduced gravity in the following stages: (1) fuel particles were mixed into cloud form inside a flammability tube; (2) when the concentration of particles in the cloud was sufficiently uniform, the particle motion was allowed to decay toward quiescence; (3) an igniter was energized which both opened one end of the tube and ignited the suspended particle cloud; and (4) the flame proceeded down the tube length, with its position and characteristic features being photographed by high-speed cameras. Gravitational settling and buoyancy effects were minimized because of the reduced gravity enviroment in the NASA Lewis drop towers and aircraft. Feasibility was shown as quasi-steady flame propagation which was observed for fuel-rich mixtures. Of greatest scientific interest is the finding that for near-stoichiometric mixtures, a new mode of flame propagation was observed, now called a chattering flame. These flames did not propagate steadily through the tube. Chattering modes of flame propagation are not expected to display extinction limits that are the same as those for acoustically undisturbed, uniform, quiescent clouds. A low concentration of fuel particles, uniformly distributed in a volume, may not be flammable but may be made flammable, as was observed, through induced segregation processes. A theory was developed which showed that chattering flame propagation was controlled by radiation from combustion products which heated the successive discrete laminae sufficiently to cause autoignition

Brownian molecular motors driven by rotation-translation coupling

We investigated three models of Brownian motors which convert rotational diffusion into directed translational motion by switching on and off a potential. In the first model a spatially asymmetric potential generates directed translational motion by rectifying rotational diffusion. It behaves much like a conventional flashing ratchet. The second model utilizes both rotational diffusion and drift to generate translational motion without spatial asymmetry in the potential. This second model can be driven by a combination of a Brownian motor mechanism (diffusion driven) or by powerstroke (drift driven) depending on the chosen parameters. In the third model, elements of both the Brownian motor and powerstroke mechanisms are combined by switching between three distinct states. Relevance of the model to biological motor proteins is discussed.Comment: 11 pages, 8 figure

Characterization of low thermal conductivity PAN-based carbon fibers

The microstructure and surface chemistry of eight low thermal conductivity (LTC) PAN-based carbon fibers were determined and compared with PAN-based fibers heat treated to higher temperatures. Based on wide-angle x ray diffraction, the LTC PAN fibers all appear to have a similar turbostratic structure with large 002 d-spacings, small crystallite sizes, and moderate preferred orientation. Limited small-angle x ray scattering (SAXS) results indicate that, with the exception of LTC fibers made by BASF, the LTC fibers do not have well developed pores. Transmission electron microscopy shows that the texture of the two LTC PAN-based fibers studied (Amoco T350/23X and /25X) consists of multiple sets of parallel, wavy, bent layers that interweave with each other forming a complex three dimensional network oriented randomly around the fiber axis. X ray photoelectron spectroscopy (XPS) analysis finds correlations between heat treated temperatures and the surface composition chemistry of the carbon fiber samples