Influence of Various Precursor Compositions and Substrate Angles on ZnO Nanorod Morphology Growth by Aqueous Solution Method

ZnO nanorods were synthesized on silicon wafer substrate with a seed zinc layer using the aqueous solution method. The influence of various precursor compositions on the morphology of the ZnO nanorods, with substrate angles at 0° and 90°, was investigated. The various ratios of hexamethylenetetramine in zinc nitrate hexahydrate were used as precursors in the synthesis of ZnO. Scanning electron micrography indicated that the growth of the ZnO nanorods with a 0° substrate angle was smaller than with a 90° substrate angle. The substrate angle is defined as the angle between the plane of the substrate and the horizontal layer of an aqueous solution. When the precursor concentration of hexamethylenetetramine is not equal to the ratio corresponding to the chemical reaction, the effect of the substrate angle on the diameter size and morphology of the ZnO nanorods is evident. Grazing incident X-ray diffraction (GIXRD) was used to characterize the structure of all samples. The diffraction patterns showed that the orientation matched the hexagonal wurtzite structure

Influence of Various Precursor Compositions and Substrate Angles on ZnO Nanorod Morphology Growth by Aqueous Solution Method

ZnO nanorods were synthesized on silicon wafer substrate with a seed zinc layer using the aqueous solution method. The influence of various precursor compositions on the morphology of the ZnO nanorods, with substrate angles at 0° and 90°, was investigated. The various ratios of hexamethylenetetramine in zinc nitrate hexahydrate were used as precursors in the synthesis of ZnO. Scanning electron micrography indicated that the growth of the ZnO nanorods with a 0° substrate angle was smaller than with a 90° substrate angle. The substrate angle is defined as the angle between the plane of the substrate and the horizontal layer of an aqueous solution. When the precursor concentration of hexamethylenetetramine is not equal to the ratio corresponding to the chemical reaction, the effect of the substrate angle on the diameter size and morphology of the ZnO nanorods is evident. Grazing incident X-ray diffraction (GIXRD) was used to characterize the structure of all samples. The diffraction patterns showed that the orientation matched the hexagonal wurtzite structure

Influence of Various Precursor Compositions and Substrate Angles on ZnO Nanorod Morphology Growth by Aqueous Solution Method

ZnO nanorods were synthesized on silicon wafer substrate with a seed zinc layer using the aqueous solution method. The influence of various precursor compositions on the morphology of the ZnO nanorods, with substrate angles at 0° and 90°, was investigated. The various ratios of hexamethylenetetramine in zinc nitrate hexahydrate were used as precursors in the synthesis of ZnO. Scanning electron micrography indicated that the growth of the ZnO nanorods with a 0° substrate angle was smaller than with a 90° substrate angle. The substrate angle is defined as the angle between the plane of the substrate and the horizontal layer of an aqueous solution. When the precursor concentration of hexamethylenetetramine is not equal to the ratio corresponding to the chemical reaction, the effect of the substrate angle on the diameter size and morphology of the ZnO nanorods is evident. Grazing incident X-ray diffraction (GIXRD) was used to characterize the structure of all samples. The diffraction patterns showed that the orientation matched the hexagonal wurtzite structure

Preparation of 2D Periodic Nanopatterned Arrays through Vertical Vibration-Assisted Convective Deposition for Application in Metal-Enhanced Fluorescence

The performance of a metal-enhanced fluorescence (MEF) substrate is fundamentally based on the orientation of the metal nanostructures on a solid substrate. In particular, two-dimensional (2D) periodic metallic nanostructures exhibit a strong confinement of the electric field between adjacent nanopatterns due to localized surface plasmon resonance (LSPR), leading to stronger fluorescence intensity enhancement. The use of vertical vibration-assisted convective deposition, a novel, simple, and highly cost-effective technique for preparing the 2D periodic nanostructure of colloidal particles with high uniformity, was therefore proposed in this work. The influences of vertical vibration amplitude and frequency on the structure of thin colloidal film, especially its uniformity, monolayer, and hexagonal close-packed (HCP) arrangement, were also investigated. It was found that the vibration amplitude affected film uniformity, whereas the vibration frequency promoted the colloidal particles to align themselves into defect-free HCP nanostructures. Furthermore, the results showed that the self-assembled 2D periodic arrays of monodisperse colloidal particles were employed as an excellent template for a Au thin-film coating in order to fabricate an efficient MEF substrate. The developed MEF substrate provided a strong plasmonic fluorescence enhancement, with a detection limit for rhodamine 6G as low as 10−9 M. This novel approach could be advantageous in further applications in the area of plasmonic sensing platforms

Fabrication of an acetone gas sensor based on Si-doped WO3 nanorods prepared by reactive magnetron co-sputtering with OAD technique

Gas sensing technology is currently applied in a variety of applications. In medical applications, gas sensors can be used for the detection of the biomarker in various diseases, metabolic disorders, diabetes mellitus, asthma, renal, liver diseases, and lung cancer. In this study, we present acetone sensing characteristics of Si-doped WO _3 nanorods prepared by a DC reactive magnetron co-sputtering with an oblique-angle deposition (OAD) technique. The composition of Si-doped in WO _3 has been studied by varying the electrical input power applied to the Si sputtered target. The nanorods film was constructed at the glancing angle of 85°. After deposition, the films were annealed at 400 °C for 4 h in the air. The microstructures and phases of the materials were characterized by x-ray photoelectron spectroscopy (XPS), x-ray diffraction (XRD), and field-emission scanning electron microscopy (FESEM). The results showed that 1.43 wt% Si-doped WO _3 thin film exhibited the maximum response of 5.92 towards 100 ppm of acetone at performing temperature (350 °C), purifying dry air carrier. The process exposed in this work demonstrated the potential of high sensitivity acetone gas sensor at low concentration and may be used as an effective tool for diabetes non-invasive monitoring

Demonstration of cross reaction in hybrid graphene oxide/tantalum dioxide guided mode resonance sensor for selective volatile organic compound

Abstract This paper experimentally demonstrates a crossed reaction of pure and hybrid graphene oxide (GO)/tantalum dioxide (TaO2) as a volatile organic compound (VOC) absorber in a guided mode resonance (GMR) sensing platform. The proposed GMR platform has a porous TaO2 film as the main guiding layer, allowing for more molecular adsorption and enhanced sensitivity. GO is applied on top as an additional VOC absorber to increase the selectivity. The hybrid sensing mechanism is introduced by varying the concentration of the GO aqueous solution. The experimental results show that the pure TaO2-GMR has a high tendency to adsorb most of the tested VOC molecules, with the resonance wavelength shifting accordingly to the physical properties of the VOCs (molecular weight, vapor pressure, etc). The largest signal appears in the large molecule such as toluene, and its sensitivity is gradually reduced in the hybrid sensors. At the optimum GO concentration of 3 mg/mL, the hybrid GO/TaO2 -GMR is more sensitive to methanol, while the pure GO sensor coated with GO at 5 mg/mL is highly selective to ammonia. The sensing mechanisms are verified using the distribution function theory (DFT) to simulate the molecular absorption, along with the measured functional groups measured on the sensor surface by the Fourier transform infrared spectroscopy (FTIR). The crossed reaction of these sensors is further analyzed by means of machine learning, specifically the principal component analysis (PCA) method and decision tree algorithm. The results show that this sensor is a promising candidate for quantitative and qualitative VOCs detection in sensor array platform