Goos-H\"{a}nchen-Like Shifts in Atom Optics

We consider the propagation of a matter wavepacket of two-level atoms through a square potential created by a super-Gaussian laser beam. We explore the matter wave analog of Goos-H\"{a}nchen shift within the framework of atom optics where the roles of atom and light is exchanged with respect to conventional optics. Using a vector theory, where atoms are treated as particles possessing two internal spin components, we show that not only large negative but also large positive Goos-H\"{a}nchen shifts can occur in the reflected atomic beam.Comment: 7 pages, 4 figure

Biomechanical comparison of different internal fixation devices for transversely unstable Mason type II radial head fractures

Background: The integrity of the radial head is critical to maintaining elbow joint stability. For radial head fractures requiring surgical treatment, headless compression cannulated screw fixation is a less invasive scheme that has fewer complications. The aim of this study was to compare the mechanical stability of different fixation devices, including headless compression cannulated screws and mini-T-plates, for the fixation of transversely unstable radial head fractures.Methods: Forty identical synthetic radius bones were used to construct transverse unstable radial head fracture models. Parallel, cross, and tripod headless compression cannulated screw fixation and mini-T plate fixation were applied. The structural stiffness of each group was compared by static shear loading. Afterward, cyclic loading was performed in each of the three directions of the radial head, and the shear stability of each group was compared by calculating the maximum radial head displacement at the end of the cycle.Findings: The mini-T plate group had the lowest structural stiffness (51.8 ± 7.7 N/mm) and the highest relative displacement of the radial head after cyclic loading (p < 0.05). The tripod headless compression cannulated screw group had the highest structural stiffness among all screw groups (p < 0.05). However, there was no significant difference in the relative displacement of the radial head between the screw groups after cyclic loading in different directions (p > 0.05).Interpretation: In conclusion, the biomechanical stability of the mini-T plate for fixation of transverse unstable radial head fractures is lower than that of headless compression cannulated screws. Tripod fixation provides more stable fixation than parallel and cross fixation with headless compression cannulated screws for the treatment of transversely unstable radial head fractures

The clinicopathological factors associated with disease progression in Luminal a breast cancer and characteristics of metastasis: A retrospective study from a single center in China

Background/Aim: This study investigated the clinicopathological factors associated with outcomes in patients with Luminal A breast cancer. Patients and Methods: Retrospective analysis of the association of clinicopathological factors and breast cancer outcome in 421 patients with newly diagnosed Luminal-A breast cancer that were enrolled from January 2008 to December 2014. Clinicopathological data were analyzed to validate the relationship with disease free survival (DFS) and overall survival (OS). Kaplan-Meier curves and log-rank tests were used to analyze the value of clinicopathological factors (tumor size, node status and lymphovascular invasion), and subsequent Cox regression analysis revealed significant prognostic factors. Results: With a median of 61 months follow up, the 5-year DFS and 5-year OS rate were 98.3% and 99.3%. Cox multivariate regression analysis showed that clinical anatomic stage, tumor size, status of lymph nodes, lymphovascular invasion and systemic treatment are strong prognostic factors for clinical outcome in patients with Luminal-A breast cancer. Of all 413 patients with stage I-III breast cancer, 14 presented with metastasis (3.4%) during the follow up. Bone (6/14, 42.9%) was the most common site of metastasis followed by liver (5/14, 35.7%) and lung (4/14, 28.6%). The median survival time after metastasis was 20.4 months. Of all the sites of distant metastasis, liver metastasis was the only factor that affected survival time after metastasis (χ2=6.263, p=0.012). Conclusion: Patients with Luminal A breast cancer have excellent outcomes. Liver metastasis is an important factor compressing the survival time after distant metastasis presents

Observations on Copy Number Variations in a Kidney-yang Deficiency Syndrome Family

We have performed an analysis of a family with kidney-yang deficiency syndrome (KDS) in order to determine the structural genomic variations through a novel approach designated as “copy number variants” (CNVs). Twelve KDS subjects and three healthy spouses from this family were included in this study. Genomic DNA samples were genotyped utilizing an Affymetrix 100 K single nucleotide polymorphism array, and CNVs were identified by Copy Number Algorithm (CNAT4.0, Affymetrix). Our results demonstrate that 447 deleted and 476 duplicated CNVs are shared among KDS subjects within the family. The homologus ratio of deleted CNVs was as high as 99.78%. One-copy-duplicated CNVs display mid-range homology. For two copies of duplicated CNVs (CNV4), a markedly heterologous ratio was observed. Therefore, with the important exception of CNV4, our data shows that CNVs shared among KDS subjects display typical Mendelian inheritance. A total of 113 genes with established functions were identified from the CNV flanks; significantly enriched genes surrounding CNVs may contribute to certain adaptive benefit. These genes could be classified into categories including: binding and transporter, cell cycle, signal transduction, biogenesis, nerve development, metabolism regulation and immune response. They can also be included into three pathways, that is, signal transduction, metabolic processes and immunological networks. Particularly, the results reported here are consistent with the extensive impairments observed in KDS patients, involving the mass-energy-information-carrying network. In conclusion, this article provides the first set of CNVs from KDS patients that will facilitate our further understanding of the genetic basis of KDS and will allow novel strategies for a rational therapy of this disease

The Effect of Rice Cultivars on Methane Emission From Irrigated Rice Field

Rice plants have been reported to affect methane (CH4) emission from rice fields. The objectives of this study were to determine the effect of rice cultivars on CH4 emission from flooded rice and to develop crop management strategies with low emitting rice cultivars while sustaining high yield. The four rice cultivars studied were Memberamo, Cisadane, IR64, and Way Apoburu. The CH4 emissions were determined in the wet season of 2001/2002 (November-February) using an automated closed chamber technique in an irrigated field condition. Farmyard manure at the rate of 5 t ha-1 was given to the plots to ensure carbon was not limited. Root weight, root length, biomass, and number of tillers were determined at 17, 36, and 57 days after transplanting (DAT). The results showed that the mean CH4 emission was highest in the plot planted with Cisadane (94.8 kg CH4 ha-1), and the lowest with IR64 (37.7 kg CH4 ha-1). The plots treated with emberamo and Way Apoburu resulted an intermediate CH4 emission at the average of 61.1 and 58.9 kg CH4 ha-1, respectively. There was no significant difference in yield between the cultivars tested. The yield of Memberamo, Cisadane, IR64, and Way Apoburu were 5.882, 5.764, 5.873 and 6.065 t ha-1, respectively. Statistical analysis showed that there were no significant differences in the root weight and root length among cultivars. However, Cisadane gave the highest dry matter weight (222 g hill-1) at 57 DAT compared to the other cultivars (175-190 g hill-1). Plant tillers did not show significant differences between the cultivars. Regression analysis showed that CH4 flux was significantly related with root weight, root length, aboveground biomass, and number of plant tillers. This finding shows that the use of selected cultivars, such as IR64, can potentially lower CH4 emission without scarifying yield

Possible Luttinger liquid behavior of edge transport in monolayer transition metal dichalcogenide crystals.

In atomically-thin two-dimensional (2D) semiconductors, the nonuniformity in current flow due to its edge states may alter and even dictate the charge transport properties of the entire device. However, the influence of the edge states on electrical transport in 2D materials has not been sufficiently explored to date. Here, we systematically quantify the edge state contribution to electrical transport in monolayer MoS2/WSe2 field-effect transistors, revealing that the charge transport at low temperature is dominated by the edge conduction with the nonlinear behavior. The metallic edge states are revealed by scanning probe microscopy, scanning Kelvin probe force microscopy and first-principle calculations. Further analyses demonstrate that the edge-state dominated nonlinear transport shows a universal power-law scaling relationship with both temperature and bias voltage, which can be well explained by the 1D Luttinger liquid theory. These findings demonstrate the Luttinger liquid behavior in 2D materials and offer important insights into designing 2D electronics

Regeneration of Spent Lubricant Refining Clays by Solvent Extraction

Step-by-step solvent extraction was used to regenerate spent clay by recovering the adsorbed oil in lubricating oil refining clay. Several polar and nonpolar solvents were tested, and petroleum ether (90–120°C) and ethanol (95 v%) were selected as the nonpolar and polar solvents, respectively. The spent clay was first extracted using petroleum ether (90–120°C) to obtain ideal oil and then extracted with a mixed solvent of petroleum ether (90–120°C) and ethanol (95 v%) two or three times to obtain nonideal oil before being extracted with ethanol and water. Finally, the clay was dried at 130°C to obtain regenerated clay. The total oil recovery can be more than 99 wt% of the adsorbed oil. The recovered ideal oil can be used as lubricating base oil. Shorter storage times for spent clay produce better regeneration results. The regenerated clay can be reused to refine the lubricating base oils

Online quality control of panaxatriol saponins percolation extraction using near-infrared technology

Purpose: To establish a new prediction model for online quality control of the percolation extraction of panaxatriol saponins (PTS), viz, ginsenoside Rg1, ginsenoside Re and notoginsenoside R1, from notoginseng by near-infrared (NIR) technology coupled with partial least squares (PLS) analysis.Methods: Ten batches of PTS (420 samples) were collected and the  constituents were determined using HPLC. The NIR spectroscopy of samples was determined using a Fourier-Transform nearinfrared spectrometer with an optical fiber transmission PbS detector. Eight sample batches were the calibration set, and two batches were the forecast set. Calibration models were established based on min-max normalization (MMN).Results: The root mean square errors of cross-validation (RMSECV) of Rg1, Re, and R1 were 0.798, 0.095, and 0.259 mg/mL, respectively. The root mean square errors of prediction (RMSEP) were 1.110, 0.496, and 0.390 mg/mL, respectively. The correlation coefficients (R2) of cross-validation were 0.9682, 0.9681, and 0.9626, respectively, while the correlation coefficients (R2) of prediction were 0.9831, 0.9198, and 0.9661,  respectively.Conclusion: The results indicate that NIR is a quick and effective tool for online quality control of PTS (ginsenoside Rg1, ginsenoside Re, and notoginsenoside R1) in the percolation extraction process.Keywords: Online monitoring, Near infrared technology, Panaxatriol  saponins, Partial least square