878 research outputs found
Design and flight testing of a nullable compressor face rake
A compressor face rake with an internal valve arrangement to permit nulling was designed, constructed, and tested in the laboratory and in flight at the NASA Flight Research Center. When actuated by the pilot in flight, the nullable rake allowed the transducer zero shifts to be determined and then subsequently removed during data reduction. Design details, the fabrication technique, the principle of operation, brief descriptions of associated digital zero-correction programs and the qualification tests, and test results are included. Sample flight data show that the zero shifts were large and unpredictable but could be measured in flight with the rake. The rake functioned reliably and as expected during 25 hours of operation under flight environmental conditions and temperatures from 230 K (-46 F) to greater than 430 K (314 F). The rake was nulled approximately 1000 times. The in-flight zero-shift measurement technique, as well as the rake design, was successful and should be useful in future applications, particularly where accurate measurements of both steady-state and dynamic pressures are required under adverse environmental conditions
Hybrid Propulsion Technology Program
Future launch systems of the United States will require improvements in booster safety, reliability, and cost. In order to increase payload capabilities, performance improvements are also desirable. The hybrid rocket motor (HRM) offers the potential for improvements in all of these areas. The designs are presented for two sizes of hybrid boosters, a large 4.57 m (180 in.) diameter booster duplicating the Advanced Solid Rocket Motor (ASRM) vacuum thrust-time profile and smaller 2.44 m (96 in.), one-quater thrust level booster. The large booster would be used in tandem, while eight small boosters would be used to achieve the same total thrust. These preliminary designs were generated as part of the NASA Hybrid Propulsion Technology Program. This program is the first phase of an eventual three-phaes program culminating in the demonstration of a large subscale engine. The initial trade and sizing studies resulted in preferred motor diameters, operating pressures, nozzle geometry, and fuel grain systems for both the large and small boosters. The data were then used for specific performance predictions in terms of payload and the definition and selection of the requirements for the major components: the oxidizer feed system, nozzle, and thrust vector system. All of the parametric studies were performed using realistic fuel regression models based upon specific experimental data
Let my people know!: towards a revolution in the teaching of the Hebrew bible
Acquiring knowledge of the Hebrew Bible and comprehension of the language are major aims of the Israeli education system. Yet for most students, it fails on both counts. This article proposes that these failures are closely connected: both are rooted in an erroneous linkage between Biblical Hebrew and the language spoken in modern Israel. Modern Hebrew – or more appropriately: “Israeli” – is a hybrid of Hebrew, Yiddish and other languages. Its grammar is distinct from that of Hebrew, and it has been the mother tongue of most Israeli-born Jews for about a hundred years. There is a fundamental difference between the acquisition and usage of mother tongues and those of any other language. Since Biblical Hebrew is a foreign language for modern Israelis, it ought to be taught as such. Israeli should be acknowledged as a legitimate, distinct tongue.Ghil‘ad Zuckermann, Gitit Holzma
Optimal Scheduling Using Branch and Bound with SPIN 4.0
The use of model checkers to solve discrete optimisation problems is appealing. A model checker can first be used to verify that the model of the problem is correct. Subsequently, the same model can be used to find an optimal solution for the problem. This paper describes how to apply the new PROMELA primitives of SPIN 4.0 to search effectively for the optimal solution. We show how Branch-and-Bound techniques can be added to the LTL property that is used to find the solution. The LTL property is dynamically changed during the verification. We also show how the syntactical reordering of statements and/or processes in the PROMELA model can improve the search even further. The techniques are illustrated using two running examples: the Travelling Salesman Problem and a job-shop scheduling problem
Rapidity and k_T dependence of HBT correlations in Au+Au collisions at 200 GeV with PHOBOS
Two-particle correlations of identical charged pion pairs from Au+Au
collisions at sqrt(s_NN) = 200 GeV were measured by the PHOBOS experiment at
RHIC. Data for the most central (0--15%) events were analyzed with
Bertsch-Pratt (BP) and Yano-Koonin-Podgoretskii (YKP) parameterizations using
pairs with rapidities of 0.4 < y < 1.3 and transverse momenta 0.1 < k_T < 1.4
GeV/c. The Bertsch-Pratt radii decrease as a function of pair transverse
momentum. The pair rapidity Y_pipi roughly scales with the source rapidity
Y_YKP, indicating strong dynamical correlations.Comment: 5 pages, 2 figures. To appear in the proceedings of Seventeenth
International Conference on Ultra-Relativistic Nucleus-Nucleus Collisions
(Quark Matter 2004), Oakland, California from January 11-17, 2004. Submitted
to Journal of Physics G: Nuclear and Particle Physic
SPEM dysfunction and general schizotypy as measured by the SSQ: a controlled study
Abstract Background SPEM dysfunction is a well-known phenomenon in schizophrenia. The principal aim of the present study was to examine whether SPEM dysfunction is already observable in subjects scoring high on a specific measure of schizotypy (SSQ General Schizotypy) that was selected because of its intimate relationship with schizophrenic prodromal unfolding. Methods Applying ANOVAs, we determined the relationship of subjects' scores on SSQ General Schizotypy and eye movements elicited by targets of different speed. We also examined whether there exists an association between our schizotypy measure and pupil size. Results We found more SPEM dysfunction in subjects scoring high on SSQ General Schizotypy than in subjects scoring average on that factor, irrespective of the speed of the target. No relationship was found between baseline pupil size and General Schizotypy. Conclusion The present study provides additional evidence that SPEM dysfunction is associated with schizotypic features that precede the onset of schizophrenia and is already observable in general population subjects that show these features
The Landscape of Particle Production: Results from PHOBOS
Recent results from the PHOBOS experiment at RHIC are presented, both from
Au+Au collisions from the 2001 run and p+p and d+Au collisions from 2003. The
centrality dependence of the total charged particle multiplicity in p+p and
d+Au show features, such as Npart-scaling and limiting fragmentation, similar
to p+A collisions at lower energies. Multiparticle physics in Au+Au is found to
be local in (pseudo)rapidity, both when observed by HBT correlations and by
forward-backward pseudorapidity correlations. The shape of elliptic flow in
Au+Au, measured over the full range of pseudorapidity, appears to have a very
weak centrality dependence. Identified particle ratios in d+Au reactions show
little difference between the shape of proton and anti-proton spectra, while
the absolute yields show an approximate m_T scaling.Comment: 8 Pages, 11 Figures, Plenary talk at Quark Matter 2004, Oakland, CA,
January 11-18, 200
- …