Field-Assisted DC-Pulsed Cathodes for next generation light sources and accelerators

International audienceThe scope of that contribution is to present the challenges of the next particle sources for accelerators. It is admitted that emittance near Interaction Point (IP) is strongly dominated by the emittance of the low power source. To minimize theBremstrahlung effects in the Interaction Point (IP), we also need extremely low emittance bunches, ultra high brillance, very low charges sub fC, near depopulated attosecond electronic bunches. These produced bunches should fit the entrances of Dielectric Laser Accelerators (DLA) and Laser Plasma Accelerators (LPA).A 20kV DC pulsed sub nanosecond Field Emission Array source with extremely low emittance is considered in order to obtain such results. Firstly, we will describe the DC-pulsed experimental source by blocks. Following that, we will raise more general problems induced by DC-pulsed configuration: thermal transient behaviour of nanostructures, enhancement of plasmons coupling in relation to nanostructured networks, then fast prototyping of cathode geometry will be undertaken using different models. These cathodes are to be fabricated at Orsay.We present the method of curvilinear coordinate calculus, adapted to major classes of nanostructured tips. We define 3 major classes of 3D analytical profiles to emulate experimental conditions (multi-segment, quadratic and exponential one) and apply curvilinear analytical Maxwellsolving to find electrostatic potential around the profile. Our method is concurrent to T-splines for instance, but it is expected to converge faster. Cathode physics will be modelled integrating different phenomenons: photo/thermal/field/emission... Results will be compared to electromagnetic simulations with CST and Astra tools. To conclude, we shall then evaluate the emittance performances planned for a 20keV cathodic source, and its acceptance to the next stages, with the help of some electrostatic focusing. Numerous experimental and theoretical aspects are to be solved

Background studies for the EDELWEISS dark matter experiment

The EDELWEISS-II collaboration has completed a direct search for WIMP dark matter using cryogenic Ge detectors (400 g each) and 384 kg$\times$days of effective exposure. A cross-section of $4.4 \times 10^{-8}$ pb is excluded at 90% C.L. for a WIMP mass of 85 GeV. The next phase, EDELWEISS-III, aims to probe spin-independent WIMP-nucleon cross-sections down to a few $\times10^{-9}$ pb. We present here the study of gamma and neutron background coming from radioactive decays in the set-up and shielding materials. We have carried out Monte Carlo simulations for the completed EDELWEISS-II setup with GEANT4 and normalised the expected background rates to the measured radioactivity levels (or their upper limits) of all materials and components. The expected gamma-ray event rate in EDELWEISS-II at 20-200 keV agrees with the observed rate of 82 events/kg/day within the uncertainties in the measured concentrations. The calculated neutron rate from radioactivity of 1.0-3.1 events (90% C.L.) at 20-200 keV in the EDELWEISS-II data together with the expected upper limit on the misidentified gamma-ray events ($\le0.9$), surface betas ($\le0.3$), and muon-induced neutrons ($\le0.7$), do not contradict 5 observed events in nuclear recoil band. We have then extended the simulation framework to the EDELWEISS-III configuration with 800 g crystals, better material purity and additional neutron shielding inside the cryostat. The gamma-ray and neutron backgrounds in 24 kg fiducial mass of EDELWEISS-III have been calculated as 14-44 events/kg/day and 0.7-1.4 events per year, respectively. The results of the background studies performed in the present work have helped to select better purity components and improve shielding in EDELWEISS-III to further reduce the expected rate of background events in the next phase of the experiment.Comment: 15 pages, 9 figures, to be published in Astroparticle Physic

Axion searches with the EDELWEISS-II experiment

We present new constraints on the couplings of axions and more generic axion-like particles using data from the EDELWEISS-II experiment. The EDELWEISS experiment, located at the Underground Laboratory of Modane, primarily aims at the direct detection of WIMPs using germanium bolometers. It is also sensitive to the low-energy electron recoils that would be induced by solar or dark matter axions. Using a total exposure of up to 448 kg.d, we searched for axion-induced electron recoils down to 2.5 keV within four scenarios involving different hypotheses on the origin and couplings of axions. We set a 95% CL limit on the coupling to photons $g_{A\gamma}<2.13\times 10^{-9}$ GeV$^{-1}$ in a mass range not fully covered by axion helioscopes. We also constrain the coupling to electrons, $g_{Ae} < 2.56\times 10^{-11}$, similar to the more indirect solar neutrino bound. Finally we place a limit on $g_{Ae}\times g_{AN}^{\rm eff}<4.70 \times 10^{-17}$, where $g_{AN}^{\rm eff}$ is the effective axion-nucleon coupling for $^{57}$Fe. Combining these results we fully exclude the mass range $0.91\,{\rm eV}<m_A<80$ keV for DFSZ axions and $5.73\,{\rm eV}<m_A<40$ keV for KSVZ axions

Quantitative description of temperature induced self-aggregation thermograms determined by differential scanning calorimetry

A novel thermodynamic approach for the description of differential scanning calorimetry (DSC) experiments on self-aggregating systems is derived and presented. The method is based on a mass action model where temperature dependence of aggregation numbers is considered. The validity of the model was confirmed by describing the aggregation behavior of poly(ethylene oxide)-poly(propylene oxide) block copolymers, which are well-known to exhibit a strong temperature dependence. The quantitative description of the thermograms could be performed without any discrepancy between calorimetric and van 't Hoff enthalpies, and moreover, the aggregation numbers obtained from the best fit of the DSC experiments are in good agreement with those obtained by light scattering experiments corroborating the assumptions done in the derivation of the new model

Dual-task costs while walking increase in old age for some, but not for other tasks: an experimental study of healthy young and elderly persons

<p>Abstract</p> <p>Background</p> <p>It has been suggested in the past that the ability to walk while concurrently engaging in a second task deteriorates in old age, and that this deficit is related to the high incidence of falls in the elderly. However, previous studies provided inconsistent findings about the existence of such an age-related dual-task deficit (ARD). In an effort to explain this inconsistency, we explored whether ARD while walking emerges for some, but not for other types of task.</p> <p>Methods</p> <p>Healthy young and elderly subjects were tested under five different combinations of a walking and a non-walking task. The results were analysed jointly with those of a previous study from our lab, such that a total of 13 task combinations were evaluated. For each task combination and subject, we calculated the mean dual-task costs across both constituent tasks, and quantified ARD as the difference between those costs in elderly and in young subjects.</p> <p>Results</p> <p>An analysis of covariance yielded no significant effects of obstacle presence and overall task difficulty on ARD, but a highly significant effect of visual demand: non-walking tasks which required ongoing visual observation led to ARD of more than 8%, while those without such requirements led to near-zero ARD. We therefore concluded that the visual demand of the non-walking task is critical for the emergence of ARD while walking.</p> <p>Conclusion</p> <p>Combinations of walking and concurrent visual observation, which are common in everyday life, may contribute towards disturbed gait and falls during daily activities in old age. Prevention and rehabilitation programs for seniors should therefore include training of such combinations.</p

Multicolour Single Molecule Imaging in Cells with Near Infra-Red Dyes

Background: The autofluorescence background of biological samples impedes the detection of single molecules when imaging. The most common method of reducing the background is to use evanescent field excitation, which is incompatible with imaging beyond the surface of biological samples. An alternative would be to use probes that can be excited in the near infra-red region of the spectrum, where autofluorescence is low. Such probes could also increase the number of labels that can be imaged in multicolour single molecule microscopes. Despite being widely used in ensemble imaging, there is a currently a shortage of information available for selecting appropriate commercial near infra-red dyes for single molecule work. It is therefore important to characterise available near infra-red dyes relevant to multicolour single molecule imaging. Methodology/Principal Findings: A range of commercially available near infra-red dyes compatible with multi-colour imaging was screened to find the brightest and most photostable candidates. Image series of immobilised samples of the brightest dyes (Alexa 700, IRDye 700DX, Alexa 790 and IRDye 800CW) were analysed to obtain the mean intensity of single dye molecules, their photobleaching rates and long period blinking kinetics. Using the optimum dye pair, we have demonstrated for the first time widefield, multi-colour, near infra-red single molecule imaging using a supercontinuum light source in MCF-7 cells