114 research outputs found

    Superconducting versus normal conducting cavities

    Full text link
    One of the most important issues of high-power hadron linacs is the choice of technology with respect to superconducting or room-temperature operation. The favour for a specific technology depends on several parameters such as the beam energy, beam current, beam power and duty factor. This contribution gives an overview of the comparison between superconducting and normal conducting cavities. This includes basic radiofrequency (RF) parameters, design criteria, limitations, required RF and plug power as well as case studies.Comment: 20 pages, contribution to the CAS - CERN Accelerator School: Course on High Power Hadron Machines; 24 May - 2 Jun 2011, Bilbao, Spai

    Frequency Jump at Low Energies

    Full text link
    One or more radio-frequency jumps are usually necessary for realizing a >= 100 AMeV/u proton or ion driver linac. Typically, such jumps happen in the range of \b{eta} = 0.2-0.6 between the resonator structures fitting to this \b{eta}-range, e.g. DTL, HWR, CCL or elliptical cavities. We propose to perform the first frequency jump already at low energies (\b{eta} <= 0.1) between two RFQ accelerators, which can bring some unique advantages. First studies have been performed and the results proved that this idea is feasible and promising. Many efforts have been and are being made to address the most critical issue for the jumps i.e. the beam matching at the transition

    Prototype Design of a Newly Revised CW RFQ for the High Charge State Injector at GSI

    Get PDF
    Within the scope of the FAIR project (Facility for Antiproton and Ion Research) at GSI Helmholtz Centre for Heavy Ion Research in Darmstadt, Germany, the front end of the existing High Charge State Injector (HLI) is planned to be upgraded for cw operation. The required newly revised 4-Rod RFQ structure is currently being designed at the Institute for Applied Physics (IAP) of the Goethe University of Frankfurt. It will be operated with a 100 kW power amplifier at 108 MHz. At first instance a dedicated 4-stem prototype, which is based on the RFQ design for MYRRHA* and FRANZ**, is planned to be manufactured in order to validate the simulated RF performance, thermal behavior and mechanical characteristics in continuous operation. The RF simulations as well as basic thermal simulations are done using CST Studio Suite. In order to prevent oscillations of the electrodes mechanical eigenmodes are analyzed using ANSYS Multiphysics. In addition the ANSYS software allows more sophisticated simulations regarding the cooling capability by considering fluid dynamics in water cooling channels, thus providing a more detailed thermal analysis

    Microphonics Analysis of the SC 325 MHz CH-Cavity

    Get PDF
    Since the walls of superconducting (sc) cavities are kept very thin to support the cooling process, even small mechanical disturbances can detune the cavity. One of the main sources of detuning a cavity is microphonics. These low-frequent vibrations caused by vacuum pumps or underground noise are transferred to the cryostat and excite mechanical resonances of the cavity which may lead to frequency shifts larger than the bandwidth. To determine the mechanical resonance frequencies of the sc 325 MHz CH-cavity (Crossbar-H-Mode) simulations with ANSYS Workbench have been performed in a first step. Additionally, microphonics measurements were taken at room temperature as well as in a vertical cryostat at 4K in the cryo-lab of the IAP, Frankfurt University. Furthermore, the contraction of the cavity walls and the resulting frequency shift due to the cavity cool-down has been measured. A comparison between simulation results and the measured values is presented in this paper
    • …
    corecore