771 research outputs found
Nonlinear stabilization of tokamak microturbulence by fast ions
Nonlinear electromagnetic stabilization by suprathermal pressure gradients
found in specific regimes is shown to be a key factor in reducing tokamak
microturbulence, augmenting significantly the thermal pressure electromagnetic
stabilization. Based on nonlinear gyrokinetic simulations investigating a set
of ion heat transport experiments on the JET tokamak, described by Mantica et
al. [Phys. Rev. Lett. 107 135004 (2011)], this result explains the
experimentally observed ion heat flux and stiffness reduction. These findings
are expected to improve the extrapolation of advanced tokamak scenarios to
reactor relevant regimes.Comment: 5 pages, 5 figure
Comparison of bifurcation dynamics of turbulent transport models for the L-H transition
Electromagnetic stabilization of tokamak microturbulence in a high- regime
The impact of electromagnetic stabilization and flow shear stabilization on
ITG turbulence is investigated. Analysis of a low- JET L-mode discharge
illustrates the relation between ITG stabilization, and proximity to the
electromagnetic instability threshold. This threshold is reduced by
suprathermal pressure gradients, highlighting the effectiveness of fast ions in
ITG stabilization. Extensive linear and nonlinear gyrokinetic simulations are
then carried out for the high- JET hybrid discharge 75225, at two
separate locations at inner and outer radii. It is found that at the inner
radius, nonlinear electromagnetic stabilization is dominant, and is critical
for achieving simulated heat fluxes in agreement with the experiment. The
enhancement of this effect by suprathermal pressure also remains significant.
It is also found that flow shear stabilization is not effective at the inner
radii. However, at outer radii the situation is reversed. Electromagnetic
stabilization is negligible while the flow shear stabilization is significant.
These results constitute the high- generalization of comparable
observations found at low- at JET. This is encouraging for the
extrapolation of electromagnetic ITG stabilization to future devices. An
estimation of the impact of this effect on the ITER hybrid scenario leads to a
20% fusion power improvement.Comment: 10 pages, 13 figures. Paper coupled to invited talk at the 41st EPS
conference, Berlin, 201
Control of the tokamak safety factor profile with time-varying constraints using MPC
A controller is designed for the tokamak safety factor profile that takes real-time-varying operational and physics limits into account. This so-called model predictive controller (MPC) employs a prediction model in order to compute optimal control inputs that satisfy the given limits. The use of linearized models around a reference trajectory results in a quadratic programming problem that can easily be solved online. The performance of the controller is analysed in a set of ITER L-mode scenarios simulated with the non-linear plasma transport code RAPTOR. It is shown that the controller can reduce the tracking error due to an overestimation or underestimation of the modelled transport, while making a trade-off between residual error and amount of controller action. It is also shown that the controller can account for a sudden decrease in the available actuator power, while providing warnings ahead of time about expected violations of operational and physics limits. This controller can be extended and implemented in existing tokamaks in the near future.</p
Electromagnetic stabilization of tokamak microturbulence in a high- β regime
The impact of electromagnetic stabilization and flow shear stabilization on ITG turbulence is investigated. Analysis of a low- β JET L-mode discharge illustrates the relation between ITG stabilization and proximity to the electromagnetic instability threshold. This threshold is reduced by suprathermal pressure gradients, highlighting the effectiveness of fast ions in ITG stabilization. Extensive linear and nonlinear gyrokinetic simulations are then carried out for the high- β JET hybrid discharge 75225, at two separate locations at inner and outer radii. It is found that at the inner radius, nonlinear electromagnetic stabilization is dominant and is critical for achieving simulated heat fluxes in agreement with the experiment. The enhancement of this effect by suprathermal pressure also remains significant. It is also found that flow shear stabilization is not effective at the inner radii. However, at outer radii the situation is reversed. Electromagnetic stabilization is negligible while the flow shear stabilization is significant. These results constitute the high- β generalization of comparable observations found at low- β at JET. This is encouraging for the extrapolation of electromagnetic ITG stabilization to future devices. An estimation of the impact of this effect on the ITER hybrid scenario leads to a 20% fusion power improvement.</p
ITER-like current ramps in JET with ILW: experiments, modelling and consequences for ITER
Since the ITER-like wall in JET (JET-ILW) came into operation, dedicated ITER-like plasma current ( I p ) ramp-up (RU) and ramp-down (RD) experiments have been performed and matched to similar discharges with the carbon wall (JET-C). The experiments show that access to H-mode early in the I p</p
ITER-like current ramps in JET with ILW: experiments, modelling and consequences for ITER
Since the ITER-like wall in JET (JET-ILW) came into operation, dedicated ITER-like plasma current ( I p ) ramp-up (RU) and ramp-down (RD) experiments have been performed and matched to similar discharges with the carbon wall (JET-C). The experiments show that access to H-mode early in the I p</p
Integrated core–SOL–divertor modelling for ITER including impurity: effect of tungsten on fusion performance in H-mode and hybrid scenario
The compatibility of two operational constraints—operation above the L–H power threshold and at low power to divertor—is examined for ITER long pulse H-mode and hybrid scenarios in integrated core–scrape off layer (SOL)–divertor modelling including impurities (intrinsic Be, He, W and seeded Ne). The core thermal, particle and momentum transport is simulated with the GLF23 transport model tested in the self-consistent simulations of temperatures, density and toroidal rotation velocity in JET hybrid discharges and extrapolated to ITER. The beneficial effect of toroidal rotation velocity on fusion gain is shown. The sensitivity studies with respect to operational (separatrix and pedestal density, Ne gas puff) and unknown physics (W convective velocity and perpendicular diffusion in SOL as well as W prompt re-deposition) parameters are performed to determine their influence on the operational window and fusion gain.</p
Overview of the TCV tokamak experimental programme
The tokamak a configuration variable (TCV) continues to leverage its unique shaping capabilities, flexible heating systems and modern control system to address critical issues in preparation for ITER and a fusion power plant. For the 2019-20 campaign its configurational flexibility has been enhanced with the installation of removable divertor gas baffles, its diagnostic capabilities with an extensive set of upgrades and its heating systems with new dual frequency gyrotrons. The gas baffles reduce coupling between the divertor and the main chamber and allow for detailed investigations on the role of fuelling in general and, together with upgraded boundary diagnostics, test divertor and edge models in particular. The increased heating capabilities broaden the operational regime to include T (e)/T (i) similar to 1 and have stimulated refocussing studies from L-mode to H-mode across a range of research topics. ITER baseline parameters were reached in type-I ELMy H-modes and alternative regimes with \u27small\u27 (or no) ELMs explored. Most prominently, negative triangularity was investigated in detail and confirmed as an attractive scenario with H-mode level core confinement but an L-mode edge. Emphasis was also placed on control, where an increased number of observers, actuators and control solutions became available and are now integrated into a generic control framework as will be needed in future devices. The quantity and quality of results of the 2019-20 TCV campaign are a testament to its successful integration within the European research effort alongside a vibrant domestic programme and international collaborations
- …