87 research outputs found
Simultaneous electrical and optical study of spoke rotation, merging and splitting in HiPIMS plasma
Suscetibilidade antimicrobiana de Staphylococcus spp. isolados de cĂŁes com pioderma superficial
Temporal Stability of the Czech Translation of the Satisfaction with Life Scale: Test-Retest Data over One Week
Phosphorylation of chromatin proteins and phosphoprotein kinases in neoplastic growth. Abstr.
Cavitation and grain boundary sliding during creep of Mg-Y-Nd-Zn-Mn alloy
Creep of squeeze-cast Mg-3Y-2Nd-1Zn-1Mn alloy was investigated at the constant load in the stress range of 30–80 MPa. Tensile creep tests were performed at 300 °C up to the final fracture. Several tests at 50 MPa were interrupted after reaching the steady state creep; and another set of creep tests was interrupted after the onset of ternary creep. Fraction of cavitated dendritic boundaries was evaluated using optical microscopy. Measurement of grain boundary sliding by observation of the offset of marker lines was carried out on the surface of the crept specimens after the test interruption by scanning electron microscopy and by confocal laser scanning microscopy. The results show that the dominant creep mechanism in this alloy is dislocation creep with minor contribution of the grain boundary sliding. Creep failure took place by the nucleation, growth and coalescence of creep cavities on the boundaries predominantly oriented perpendicular to the applied stress. Increasing amount of cavitated boundaries with time of creep exposure supports the mechanism of continuous cavity nucleation and growth
Creep behaviour of the creep resistant MgY3Nd2Zn1Mn1 alloy
Creep, microstructure and failure of the squeeze cast MgY3Nd2Zn1Mn1 alloy were investigated. The tensile creep tests were performed at 300 °C and constant load in the stress range 30-80 MPa. The minimum creep rate εmin, as a function of the stress, follows a power law with the exponent n = 5.9 at 30-70 MPa. The time to fracture tf is also a power function of the stress with an exponent m = -4.4. The modified Monkman-Grant relation is valid. Microstructure development during creep exposure of the MgY3Nd2Zn1Mn1 alloy suggests the low stacking fault energy as the main creep controlling factor. The alloy is superior to the WE43 alloy both in time to fracture and in the minimum creep rate about one and two orders of magnitude, respectively. Both the mean value of the modified Monkman-Grant constant and its scatter correspond to the model of constrained growth of cavities along dendrite boundaries
- …