Separation and recovery of carbon dioxide by a membrane flash process utilizing waste thermal energy

AbstractThe membrane flash process utilizing waste thermal energy was developed to realize an energy-saving technology and to substitute it for a conventional regenerator. The operating conditions of a membrane flash at high temperature were studied. The DEA concentration and the flashing pressure had optimum values to improve the performance and reduce the energy consumption for CO2 recovery. The petroleum refinery process and iron manufacturing process were proposed for candidate processes that actually had waste energy sources. Energy consumption and costs for CO2 recovery in the membrane flash and chemical absorption were estimated by custom-made program and discussed under the same conditions. The membrane flash was suitable for the CO2 emission sources that had high CO2 concentration independently of the plant scale. The chemical absorption was suitable for large-scale sources, even if the CO2 concentration was low

Experimental study on veno-venous extracorporeal membrane oxygenation for respiratory failure after lung transplantation.

Extracorporeal Membrane Oxygenation (ECMO) has been adopted as a means of strong respiratory support. In lung transplantation, reimplantation response is still a serious problem. It causes severe respiratory failure which is refractory to mechanical ventilation in some cases. The purpose of this study was to evaluate the effects of veno-venous ECMO after lung transplantation using a canine autotransplantation model. The autotransplantation model was created by keeping the left lung in a warm ischemic state for 2 h. After reperfusion, the right pulmonary artery was ligated. The following two groups were studied: Group 1, Control group, (no ECMO group) (n = 6). After reperfusion, both lungs were ventilated without ECMO. Group 2, ECMO group (n = 7). After reperfusion, veno-venous ECMO support was introduced with reduction of mechanical ventilation. In the no ECMO group, four of the animals died within 210 min after reperfusion. In the ECMO group, two of the animals died of severe pulmonary edema. Data of blood gas analyses (PaO2, PaCO2, and SvO2) after reperfusion were significantly better in the ECMO group, whereas there were no significant differences in both shunt fraction and pulmonary vascular resistance index. In this model with severe pulmonary edema induced by warm ischemia, veno-venous ECMO contributed to the improvement of hypoxemia and hypercapnia, but did not improve pulmonary hemodynamics.</p

Laparoscopy endoscopy cooperative surgery for gastric plexiform fibromyxoma: a case report

[Background] Gastric submucosal tumors are commonly treated by partial resection under laparoscopy. However, the surgical resection of gastric submucosal tumors sometimes causes deformation of the stomach, especially in the case of intraluminal tumors located near the pylorus or esophagogastric junction. Such deformations can result in impaired diet intake and reduced quality of life. Laparoscopic endoscopic cooperative surgery has been developed to overcome these problems. This is the first report to describe a case of gastric plexiform fibromyxoma, a rare gastric submucosal tumor, that was successfully resected by laparoscopic endoscopic cooperative surgery. [Case presentation] A 36-year-old Japanese woman presented with epigastric pain and anemia. Gastrointestinal endoscopy revealed a submucosal tumor in the gastric antrum. Because a definitive diagnosis could not be obtained and the tumor was located near the pylorus, we performed laparoscopic endoscopic cooperative surgery as diagnostic therapy. The postoperative course was favorable with no complications, such as delayed gastric emptying or outlet obstruction. The tumor was pathologically diagnosed as gastric plexiform fibromyxoma. [Conclusions] Laparoscopic endoscopic cooperative surgery is a useful approach for diagnostic therapy for rare submucosal tumors to avoid the deformation of the stomach, especially when the tumor is located near the pylorus

Distribution of Deoxynivalenol and Nivalenol in Milling Fractions from Fusarium-Infected Japanese Wheat Cultivars

Reprinted with permission from the Journal of Food Protection. Copyright held by the International Association for Food Protection, Des Moines, Iowa, U.S.A.The fate of the Fusarium mycotoxins deoxynivalenol and nivalenol during the milling of Japanese wheat cultivars artificially infected with Fusarium was investigated. Grain samples with different mycotoxin concentrations were milled using a laboratory-scale test mill to produce eight fractions: three breaking flours (1B, 2B, and 3B), three reduction flours (1M. 2M, and 3M), wheat bran, and wheat shorts. Patent flour for human consumption was made from the I B, 2B, I M. and 2M flours, and low-grade flour was made from 3B and 3M flours. The four resulting samples (patent flour, low-grade flour, bran, and shorts) were analyzed for deoxynivalenol and/or nivalenol with an in-house validated analytical method using high-performance liquid chromatography with UV absorbance detection. In samples with different mycotoxin concentrations, the distribution of those toxins differed among the milling fractions. Grains with a lower level of contamination produced bran and shorts samples with a high relative concentration of nivalenol. A high percentage of nivalenol was found in patent flour, followed by bran. Contrary to the less-contaminated sample, the concentration of nivalenol in moderately contaminated grain was high only in the shorts sample. The highest percentage of deoxynivalenol and nivalenol was observed in the patent flour. The results of this study indicate that the distribution of deoxynivalenol and nivalenol in milled Japanese wheat could be influenced by the contamination level of the original grain, and the milling process is not always effective for removal of toxins from wheat grains.ArticleJOURNAL OF FOOD PROTECTION. 73(10):1817-1823 (2010)journal articl

DSIF contributes to transcriptional activation by DNA-binding activators by preventing pausing during transcription elongation

The transcription elongation factor 5,6-dichloro-1-β-d-ribofuranosylbenzimidazole (DRB) sensitivity-inducing factor (DSIF) regulates RNA polymerase II (RNAPII) processivity by promoting, in concert with negative elongation factor (NELF), promoter-proximal pausing of RNAPII. DSIF is also reportedly involved in transcriptional activation. However, the role of DSIF in transcriptional activation by DNA-binding activators is unclear. Here we show that DSIF acts cooperatively with a DNA-binding activator, Gal4-VP16, to promote transcriptional activation. In the absence of DSIF, Gal4-VP16-activated transcription resulted in frequent pausing of RNAPII during elongation in vitro. The presence of DSIF reduced pausing, thereby supporting Gal4-VP16-mediated activation. We found that DSIF exerts its positive effects within a short time-frame from initiation to elongation, and that NELF does not affect the positive regulatory function of DSIF. Knockdown of the gene encoding the large subunit of DSIF, human Spt5 (hSpt5), in HeLa cells reduced Gal4-VP16-mediated activation of a reporter gene, but had no effect on expression in the absence of activator. Together, these results provide evidence that higher-level transcription has a stronger requirement for DSIF, and that DSIF contributes to efficient transcriptional activation by preventing RNAPII pausing during transcription elongation

FABRICATION OF FIELD-EFFECT DEVICES BASED ON YBACUO/PRBACUO/YBACUO JUNCTIONS

In order to investigate an electric field effect in the junction, the three terminal device was fabricated. When the gate voltage of +2V (E=7x10(4) V/cm) was applied, the drain-source resistance decreased above the temperature of 100K. However, the electric field effect could not be observed below the temperature of 100K. Above the temperature of 100K, it is found that the CuO chain in PBCO behaved itself as a doped semiconductor (acceptor level = 26.5 meV)

Evolution of two-step structural phase transition in Fe1+dTe detected by low-temperature x-ray diffraction

The low-temperature crystal structure of Fe1.13Te, which exhibits an anomalous two-step magnetic transition, was clarified by the systematic x-ray diffraction measurements. It was found that two-step structural phase transition, tetragonal-orthorhombic-monoclinic, occurred correspondingly to the two-step magnetic transition. The detailed analysis of the profile at 5 K indicated the coexistence of the minor orthorhombic area inside the major monoclinic lattice, which could explain the lower-shift (suppression) of the antiferromagnetic transition temperature in Fe1.13Te and suggest a possibility of superconductivity at the domain boundary.Comment: 12 pages, 3 figure

Cisplatin-induced programmed cell death ligand-2 expression is associated with metastasis ability in oral squamous cell carcinoma.

Programmed cell death ligands (PD-Ls) are expressed in tumor cells where they bind to programmed cell death-1, an immunocyte co-receptor, resulting in tumor cell evasion from the immune system. Chemotherapeutic drugs have been recently reported to induce the expression of PD-L, such as PD-L1, in some cancer cells. However, little is known regarding PD-L2 expression and its role in oral squamous cell carcinoma (OSCC). In this study, we examined the effect of cisplatin on the expression and regulation of PD-L2 in OSCC cell lines and analyzed malignant behavior in PD-L2-expressing cells using colony, transwell and transformation assays. In addition, we examined PD-L2 expression in the tumor tissues of OSCC patients using cytology and tissue microarray methods. In OSCC cell lines, cisplatin treatment upregulated PD-L2 expression, along with that of the drug efflux transporter ABCG2, via signal transducers and activator of transcription (STAT) 1/3 activation. Moreover, PD-L2-positive or PD-L2-overexpressing cells demonstrated upregulation in both invasion and transformation ability but not in proliferation compared with PD-L2-negative or PD-L2-silencing cells. PD-L2 expression was also observed in OSCC cells of cytology samples and tissue from OSCC patients. The intensity of PD-L2 expression was correlated with more malignant morphological features in the histological appearance and an invasive pattern. Our findings indicate that cisplatin-upregulated PD-L2 expression in OSCC via STAT1/3 activation and the expression of PD-L2 are likely to be associated with malignancy in OSCC. The PD-L2 expression in cisplatin-resistant OSCC cells may be a critical factor in prognosis of advanced OSCC patients.福岡歯科大学2019年

Intrathoracic esophagogastric anastomosis using a linear stapler following minimally invasive esophagectomy in the prone position.

[Background] Minimally invasive esophagectomy (MIE) in the prone position typically includes thoracoscopic mediastinal dissection and laparoscopic gastric tube construction, followed by esophagogastric anastomosis in the neck. We introduced an intrathoracic esophagogastric anastomosis using linear staplers. [Technique] The lower mediastinal dissection and the gastric tube construction are done in the laparoscopic part of the operation. The esophagus is transected at the cranial level of the aortic arch after the completion of the upper mediastinal lymph node dissection in the prone position. The excess length of the gastric tube is sacrificed before making the anastomosis. Side-to-side esophagogastric anastomosis is performed using a 35-mm endoscopic linear stapler. The entry hole is closed with hand suturing using the posterior and the axillary port. [Results] Twenty-six patients with middle or lower esophageal tumor underwent MIE with an intrathoracic anastomosis. The mean thoracoscopic procedure time was 302 min. One patient had an anastomotic leakage, which was successfully managed with drainage. There has been no anastomotic stenosis. Pneumonia was observed in two patients. There was no mortality. [Conclusions] MIE with an intrathoracic linear-stapled anastomosis with the patient in the prone position is safe and feasible