310 research outputs found

    Critical Currents, Pinning Forces and Irreversibility Fields in (YxTml-x)Ba2Cu3O7 Single Crystals with Columnar Defects in Fields up to 50 T

    Full text link
    We have studied the influence of columnar defects, created by heavy-ion (Kr) irradiation with doses up to 6 10^11 Kr-ions/cm2, on the superconducting critical parameters of single crystalline (YxTm1-x)Ba2Cu3O7. Magnetisation measurements in pulsed fields up to 50 T in the temperature range 4.2 - 90 K revealed that: (i) in fields up to T the critical current Jc(H,T) is considerably enhanced and (ii) down to temperatures T ~ 40 K the irreversibility field Hirr(T) is strongly increased. The field range and magnitude of the Jc(H,T) and Hirr(T) enhancement increase with increasing irradiation dose. To interpret these observations, an effective matching field was defined. Moreover, introducing columnar defects also changes the pinning force fp qualitatively. Due to stronger pinning of flux lines by the amorphous defects, the superconducting critical parameters largely exceed those associated with the defect structures in the unirradiated as-grown material: Jc,irrad(77 K, 5 T) ^3 10* Jc,ref(77 K, 5 T).Comment: 11 pages, all PDF, contribution to Physica

    Rapid solidification morphologies in Ni3Ge: Spherulites, dendrites and dense-branched fractal structures

    Get PDF
    Single-phase ÎČ-Ni3Ge has been rapidly solidified via drop-tube processing. At low cooling rates (850–300 Όm diameter particles, 700–2800 K s−1) the dominant solidification morphology, revealed after etching, is that of isolated spherulites in an otherwise featureless matrix. At higher cooling rates (300–75 Όm diameter particles, 2800–25,000 K s−1) the dominant solidification morphology is that of dendrites, again imbedded within a featureless matrix. As the cooling rate increases towards the higher end of this range the dendrites display non-orthogonal side-branching and tip splitting. At the highest cooling rates studied (25,000 K s−1), dense-branched fractal structures are observed. Selected area diffraction analysis in the TEM reveals the spherulites and dendrites are a disordered variant of ÎČ-Ni3Ge, whilst the featureless matrix is the ordered variant of the same compound. We postulate that the spherulites and dendrites are the rapid solidification morphology and that the ordered, featureless matrix grew more slowly post-recalescence. Spherulites are most likely the result of kinetically limited growth, switching to thermal dendrites as the growth velocity increases. It is extremely uncommon to observe such a wide range of morphologies as a function of cooling rate in a single material

    Magnetotransport in a pseudomorphic GaAs/GaInAs/GaAlAs heterostructure with a Si delta-doping layer

    Full text link
    Magnetotransport properties of a pseudomorphic GaAs/Ga0.8In0.2As/Ga0.75Al0.25As heterostructure are investigated in pulsed magnetic fields up to 50 T and at temperatures of T=1.4 K and 4.2 K. The structure studied consists of a Si delta-layer parallel to a Ga0.8In0.2As quantum well (QW). The dark electron density of the structure is n_e=1.67x 10^16 m^-2. By illumination the density can be increased up to a factor of 4; this way the second subband in the Ga0.8In0.2As QW can become populated as well as the Si delta-layer. The presence of electrons in the delta-layer results in drastic changes in the transport data, especially at magnetic fields beyond 30 T. The phenomena observed are interpreted as: 1) magnetic freeze-out of carriers in the delta-layer when a low density of electrons is present in the delta-layer, and 2) quantization of the electron motion in the two dimensional electron gases in both the Ga0.8In0.2As QW and the Si delta-layer in the case of high densities. These conclusions are corroborated by the numerical results of our theoretical model. We obtain a satisfactory agreement between model and experiment.Comment: 23 pages, RevTex, 11 Postscript figures (accepted for Phys. Rev. B

    RIGHT-FIELD SUBMILLIMETER MAGNETO-SPECTROSCOPY ON Hg(Fe)Se

    Get PDF
    Magnetooptical phenomena in the zero-gap semimagnetic semiconductor Hg(Fe)Se are studied by various techniques in pulsed magnetic fields up to 150 ΀. Microscopical parameters are estimated in combination with results obtained from transport and magnetization measurements

    Superconducting properties and Fermi-surface topology of the quasi-two-dimensional organic superconductor λ\lambda-(BETS)2_{2}GaCl4_{4}

    Full text link
    The Fermi surface topology of the organic superconductor \lbets has been determined using the Shubnikov-de Haas and magnetic breakdown effects and angle-dependent magnetoresistance oscillations. The former experiments were carried out in pulsed fields of up to 60 T, whereas the latter employed quasistatic fields of up to 30 T. All of these data show that the Fermi-surface topology of \lbets is very similar to that of the most heavily-studied organic superconductor, \cuscn, except in one important respect; the interplane transfer integral in \lbets is a factor ∌10\sim 10 larger than that in \cuscn . The increased three-dimensionality of \lbets is manifested in radiofrequency penetration-depth measurements, which show a clear dimensional crossover in the behaviour of Hc2(T)H_{c2}(T). The radiofrequency measurements have also been used to extract the Labusch parameter determining the fluxoid interactions as a function of temperature, and to map the flux-lattice melting curve.Comment: 24 pages 10 figure

    The Flux-Line Lattice in Superconductors

    Full text link
    Magnetic flux can penetrate a type-II superconductor in form of Abrikosov vortices. These tend to arrange in a triangular flux-line lattice (FLL) which is more or less perturbed by material inhomogeneities that pin the flux lines, and in high-TcT_c supercon- ductors (HTSC's) also by thermal fluctuations. Many properties of the FLL are well described by the phenomenological Ginzburg-Landau theory or by the electromagnetic London theory, which treats the vortex core as a singularity. In Nb alloys and HTSC's the FLL is very soft mainly because of the large magnetic penetration depth: The shear modulus of the FLL is thus small and the tilt modulus is dispersive and becomes very small for short distortion wavelength. This softness of the FLL is enhanced further by the pronounced anisotropy and layered structure of HTSC's, which strongly increases the penetration depth for currents along the c-axis of these uniaxial crystals and may even cause a decoupling of two-dimensional vortex lattices in the Cu-O layers. Thermal fluctuations and softening may melt the FLL and cause thermally activated depinning of the flux lines or of the 2D pancake vortices in the layers. Various phase transitions are predicted for the FLL in layered HTSC's. The linear and nonlinear magnetic response of HTSC's gives rise to interesting effects which strongly depend on the geometry of the experiment.Comment: Review paper for Rep.Prog.Phys., 124 narrow pages. The 30 figures do not exist as postscript file

    Formation of a quasicrystalline phase in Al–Mn base alloys cast at intermediate cooling rates

    Full text link
    Al-rich 94Al–6Mn and 94Al–4Mn–2Fe alloys were suction-cast to evaluate thefeasibility of obtaining bulk quasicrystal-strengthened Al-alloys at intermediatecooling rates alloyed with non-toxic, easily accessible and affordable additions.The influence of different cooling rates on the potential formation of a quasicrystallinephase was examined by means of scanning and transmissionelectron microscopy, X-ray diffraction and differential scanning calorimetry.Increased cooling rates in the thinnest castings entailed a change in samplephase composition. The highest cooling rates turned out to be insufficient toform an icosahedral quasicrystalline phase (I-phase) in the binary alloy. Instead,an orthorhombic approximant phase occurred (L-phase). The addition of Fe tothe 94Al–6Mn binary alloy enhanced the formation of a quasicrystalline phase.At intermediate cooling rates of 102–103 K/s, various metastable phases wereformed, including decagonal and icosahedral quasicrystals and their approximants.Rods (1 mm in diameter) composed of I-phase particles embedded in Almatrix exhibited a hardness of 1.5 GPa, much higher than the 1.1 GPa of 94Al–6Mn

    Heterogeneous nucleation and microstructure formation: Steps towards a system and scale bridging understanding

    Full text link
    • 

    corecore