Evaluation of shear bond strength of orthodontic brackets using trans-illumination technique with different curing profiles of LED light-curing unit in posterior teeth.

BackgroundAlthough using light-cured composites for bonding orthodontic brackets has become increasingly popular, curing light cannot penetrate the metallic bulk of brackets and polymerization of composites is limited to the edges. Limited access and poor direct sight may be a problem in the posterior teeth. Meanwhile, effectiveness of the trans-illumination technique is questionable due to increased bucco-lingual thickness of the posterior teeth. Light-emitting diode (LED) light-curing units cause less temperature rise and lower risk to the pulpal tissue. The purpose of this study was to evaluate the clinical effectiveness of trans-illumination technique in bonding metallic brackets to premolars, using different light intensities and curing times of an LED light-curing unit.MethodsSixty premolars were randomly divided into six groups. Bonding of brackets was done with 40- and 80-s light curing from the buccal or lingual aspect with different intensities. Shear bond strengths of brackets were measured using a universal testing machine. Data were analyzed by one-way analysis of variance test and Duncan's post hoc test.ResultsThe highest shear bond belonged to group 2 (high intensity, 40 s, buccal) and the lowest belonged to group 3 (low intensity, 40 s, lingual). Bond strength means in control groups were significantly higher than those in experimental groups.ConclusionsIn all experimental groups except group 6 (80 s, high intensity, lingual), shear bond strength was below the clinically accepted values. In clinical limitations where light curing from the same side of the bracket is not possible, doubling the curing time and increasing the light intensity during trans-illumination are recommended for achieving acceptable bond strengths

Comparative evaluation of the effect of Er:YAG laser and low level laser irradiation combined with CPP-ACPF cream on treatment of enamel caries

Objectives: This study investigated the effectiveness of low power red and infrared lasers and that of Er:YAG laser, in association with CPP-ACPF cream, on remineralization of white spot lesions. Study Design: Fifty intact premolars were immersed in a demineralization solution for 10 weeks to induce caries like lesions and then were divided into five groups. In group 1, the teeth were covered with a CPP-ACPF cream for 3 minutes and then irradiated with a low power red laser (660 nm, 200 mW) for 1 minute through the cream. In group 2, the treatment was the same as that in group 1, but an infrared laser (810 nm, 200 mW) was employed. The specimens in group 3 were irradiated with an Er:YAG laser (100 mJ, 10 Hz) combined with CPP-ACPF. In group 4, the CPP-ACPF cream was applied for 4 minutes and group 5 was submitted to neither laser nor CPP-ACPF. The micro Vickers hardness was compared at 20, 60 and 100 ì from the enamel surface among the groups. Results: The highest microhardness was observed in the low power red and Er:YAG laser groups and the lowest one belonged to the CPP-ACPF alone and control groups. However, no significant difference was found in microhardness of the experimental groups at any of the evaluation depths (p>0.05). Conclusion: With the laser parameters used in this study, neither the combined application of Er:YAG laser with CPP-ACPF nor the combination of low power lasers with CPP-ACPF provided a significant increase in remineralization of enamel caries

Evaluation of shear bond strength of orthodontic brackets using trans-illumination technique with different curing profiles of LED light-curing unit in posterior teeth

BACKGROUND: Although using light-cured composites for bonding orthodontic brackets has become increasingly popular, curing light cannot penetrate the metallic bulk of brackets and polymerization of composites is limited to the edges. Limited access and poor direct sight may be a problem in the posterior teeth. Meanwhile, effectiveness of the trans-illumination technique is questionable due to increased bucco-lingual thickness of the posterior teeth. Light-emitting diode (LED) light-curing units cause less temperature rise and lower risk to the pulpal tissue. The purpose of this study was to evaluate the clinical effectiveness of trans-illumination technique in bonding metallic brackets to premolars, using different light intensities and curing times of an LED light-curing unit. METHODS: Sixty premolars were randomly divided into six groups. Bonding of brackets was done with 40- and 80-s light curing from the buccal or lingual aspect with different intensities. Shear bond strengths of brackets were measured using a universal testing machine. Data were analyzed by one-way analysis of variance test and Duncan's post hoc test. RESULTS: The highest shear bond belonged to group 2 (high intensity, 40 s, buccal) and the lowest belonged to group 3 (low intensity, 40 s, lingual). Bond strength means in control groups were significantly higher than those in experimental groups. CONCLUSIONS: In all experimental groups except group 6 (80 s, high intensity, lingual), shear bond strength was below the clinically accepted values. In clinical limitations where light curing from the same side of the bracket is not possible, doubling the curing time and increasing the light intensity during trans-illumination are recommended for achieving acceptable bond strengths

Introducing a User-Friendly Technique for Treatment of Palatally-Impacted Canines with the Aid of Temporary Anchorage Devices

Treatment of impacted canine teeth is a challenge for most clinicians, especially in adult patients with high risk of ankylosis. Conventionally, leveling and alignment of the teeth are first performed and after heavy arch wire placement in slot of brackets, de-impaction force is applied. However, this method has some disadvantages, such as inability to detect ankylosis of the impacted tooth until load application, risk of root resorption of incisors or necrosis of them, distortion of dental arch form, the need for early extraction of primary canines, which is esthetically unfavorable for patients, and long-term presence of fixed orthodontic appliances in the oral cavity. This study aims to introduce approach that can be easily used by busy clinicians to guide palatally impacted canines into the dental arch using a cantilever spring supported by two palatal miniscrews prior to the initiation of fixed orthodontic treatment, and report some cases treated with this technique. This technique does not have the shortcomings of the conventional technique. In addition, the total duration of treatment, and duration of presence of orthodontic appliances in the oral cavity are shorter than the conventional technique. In addition, is less technique sensitive and do not need time complex and time consuming wire bending

Orthodontic-restorative treatment of maxillary midline diastema

Introduction: Maxillary midline diastema in adults is an esthetic problem that alters the appearance of smile. This paper describes treatment of a large diastema in a middle-aged patient. Case Report: The case was a 52-year-old woman with a large median diastema and congenitally missing maxillary lateral incisors. A combined orthodontic and prosthetic approach was used to close the diastema and open up space for substitution of missing laterals by implants. Discussion: Despite the slow rate of tooth movement in adults, a large diastema was closed. This interdisciplinary approach improved the esthetic aspect greatly. The patient was satisfied even after four-years of follow-up period

Lip - tooth relationships during smiling and speech: an evaluation of different malocclusion types

Few studies have focused on the impact of malocclusion on lip – tooth relationships during smiling and speech

Changes in shear bond strength of ceramic and stainless steel brackets with different visible light curing times and directions

Selection of the appropriate curing time and light direction may enable the appropriate shear bond strength to be obtained and avoid enamel fracture during debonding

The effects of bracket removal on enamel

Enamel cracks, which may develop during debonding orthodontic brackets, may jeopardise the integrity of the enamel and detract from the appearance of the teeth