91 research outputs found
Blue, surface-emitting, distributed feedback polyfluorene lasers
Copyright © 2003 American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. The following article appeared in Applied Physics Letters 83 (2003) and may be found at http://link.aip.org/link/?APPLAB/83/2118/1We report the fabrication of optically-pumped solid-state distributed feedback lasers utilizing two blue-light-emitting semiconducting polyfluorenes as gain media. The lasers were readily fabricated by solution deposition of thin polymer films on top of gratings etched into fused silica substrates. A compact Nd:YVO4 microchip laser was used as the pump source for the two polymers studied, and lasing was achieved at 455 and 465 nm. Low threshold energies, ≥ 4 nJ per pulse, were obtained. The emission characteristics of the lasers are described along with the results of additional experiments that investigate in more detail the effect of the grating microstructure on polymer light emission
Electrospun amplified fiber optics
A lot of research is focused on all-optical signal processing, aiming to
obtain effective alternatives to existing data transmission platforms.
Amplification of light in fiber optics, such as in Erbium-doped fiber
amplifiers, is especially important for an efficient signal transmission.
However, the complex fabrication methods, involving high-temperature processes
performed in highly pure environment, slow down the fabrication and make
amplified components expensive with respect to an ideal, high-throughput and
room temperature production. Here, we report on near infrared polymer fiber
amplifiers, working over a band of about 20 nm. The fibers are cheap, spun with
a process entirely carried out at room temperature, and show amplified
spontaneous emission with good gain coefficients as well as low optical losses
(a few cm^-1). The amplification process is favoured by the high fiber quality
and low self-absorption. The found performance metrics promise to be suitable
for short-distance operation, and the large variety of commercially-available
doping dyes might allow for effective multi-wavelength operation by electrospun
amplified fiber optics.Comment: 27 pages, 8 figure
Electronic control of coherence in a two-dimensional array of photonic crystal surface emitting lasers
We demonstrate a semiconductor PCSEL array that uniquely combines an in-plane waveguide structure with nano-scale patterned PCSEL elements. This novel geometry allows two-dimensional electronically controllable coherent coupling of remote vertically emitting lasers. Mutual coherence of the PCSEL elements is verified through the demonstration of a two-dimensional Young’s Slits experiment. In addition to allowing the all-electronic control of the interference pattern, this type of device offers new routes to power and brightness scaling in semiconductor lasers, and opportunities for all-electronic beam steering
Polarized white light from hybrid organic/III-nitrides grating structures.
Highly polarised white light emission from a hybrid organic/inorganic device has been achieved. The hybrid devices are fabricated by means of combining blue InGaN-based multiple quantum wells (MQWs) with a one-dimensional (1D) grating structure and down-conversion F8BT yellow light emitting polymer. The 1D grating structure converts the blue emission from unpolarised to highly polarised; Highly polarised yellow emission has been achieved from the F8BT polymer filled and aligned along the periodic nano-channels of the grating structure as a result of enhanced nano-confinement. Optical polarization measurements show that our device demonstrates a polarization degree of up to 43% for the smallest nano-channel width. Furthermore, the hybrid device with such a grating structure allows us to achieve an optimum relative orientation between the dipoles in the donor (i.e., InGaN/GaN MQWs) and the diploes in the acceptor (i.e., the F8BT), maximizing the efficiency of non-radiative energy transfer (NRET) between the donor and the acceptor. Time-resolved micro photoluminescence measurements show a 2.5 times enhancement in the NRET efficiency, giving a maximal NRET efficiency of 90%. It is worth highlighting that the approach developed paves the way for the fabrication of highly polarized white light emitters
Highly Anisotropic Luminescence from Poly(9,9-dioctylfluorene) Nanowires Doped with Orientationally Ordered β-Phase Polymer Chains
Monolithically integrated white light LEDs on (11-22) semi-polar GaN templates
Carrier transport issues in a (11–22) semi-polar GaN based white light emitting diode (consisting of yellow and blue emissions) have been investigated by detailed simulations, demonstrating that the growth order of yellow and blue InGaN quantum wells plays a critically important role in achieving white emission. The growth order needs to be yellow InGaN quantum wells first and then a blue InGaN quantum well after the growth of n-type GaN. The fundamental reason is due to the poor hole concentration distribution across the whole InGaN quantum well region. In order to effectively capture holes in both the yellow InGaN quantum wells and the blue InGaN quantum well, a thin GaN spacer has been introduced prior to the blue InGaN quantum well. The detailed simulations of the band diagram and the hole concentration distribution across the yellow and the blue quantum wells have been conducted, showing that the thin GaN spacer can effectively balance the hole concentration between the yellow and the blue InGaN quantum wells, eventually determining their relative intensity between the yellow and the blue emissions. Based on this simulation, we have demonstrated a monolithically multi-colour LED grown on our high quality semi-polar (11–22) GaN templates
- …