Numerical modelling of rotorcraft aeroelastic stability

Imperial Users onl

TiNi shape memory alloy thin films for microactuator application

TiNi films were prepared by co-sputtering TiNi target and a separate Ti target. Crystalline structure and phase transformation behaviors of TiNi films were investigated. Results showed that TiNi films had fine grain size of about 500 nm and fully martensitic structure at room temperature. X-ray photoelectron spectroscopy (XPS) results indicated that there is adherent and natural TiO₂ film, which is beneficial to its corrosion resistance and biocompatibillity. Results from differential scanning calorimeter (DSC), in-situ X-ray diffraction (XRD) and curvature measurement revealed clearly martensitic transformation upon heating and cooling. The TiNi films were further deposited on micromachined silicon cantilever and membrane structures in order to form micro-gripper or microvalve with large deformation due to shape-memory effect.Singapore-MIT Alliance (SMA

TiNi-based thin films for MEMS applications

In this paper, some critical issues and problems in the development of TiNi thin films were discussed, including preparation and characterization considerations, residual stress and adhesion, frequency improvement, fatigue and stability, as well as functionally graded or composite thin film design. Different types of MEMS applications were reviewed and the prospects for future advances in fabrication process and device development were discussed.Singapore-MIT Alliance (SMA

Preparation and characterization of ZnO microcantilever for nanoactuation

Zinc oxide [ZnO] thin films are deposited using a radiofrequency magnetron sputtering method under room temperature. Its crystalline quality, surface morphology, and composition purity are characterized by X-ray diffraction [XRD], atomic force microscopy [AFM], field-emission scanning electron microscopy [FE-SEM], and energy-dispersive X-ray spectroscopy [EDS]. XRD pattern of the ZnO thin film shows that it has a high c-axis-preferring orientation, which is confirmed by a FE-SEM cross-sectional image of the film. The EDS analysis indicates that only Zn and O elements are contained in the ZnO film. The AFM image shows that the film's surface is very smooth and dense, and the surface roughness is 5.899 nm. The microcantilever (Au/Ti/ZnO/Au/Ti/SiO2/Si) based on the ZnO thin film is fabricated by micromachining techniques. The dynamic characterizations of the cantilever using a laser Doppler vibrometer show that the amplitude of the cantilever tip is linear with the driving voltage, and the amplitude of this microcantilever's tip increased from 2.1 to 13.6 nm when the driving voltage increased from 0.05 to 0.3 Vrms. The calculated transverse piezoelectric constant d31 of the ZnO thin film is -3.27 pC/N. This d31 is high compared with other published results. This ZnO thin film will be used in smart slider in hard disk drives to do nanoactuation in the future

Nanocomposite Thin Films for both Mechanical and Functional Applications

The design methodology and realization of nanocomposite films aiming for mechanical (superhardness, toughness) and functional (optical, microelectronic) properties were discussed in this paper. Superhard TiCrCN and nc-TiN/a-SiNx films and super-tough nc-TiC/a-C(Al) films were prepared through co-sputtering method by optimal design of microstructure. The nanocrystalline silicon (nc-Si) passivated with a matrix of thermally grown silicon dioxide were prepared using implantation of Si into SiO₂ film, and showed improved photoluminescence and optical properties. Also discussed is the nano-composite design of thin film resistor with optimized temperature coefficient of resistivity.Singapore-MIT Alliance (SMA

Patterning and manipulating microparticles into a three-dimensional matrix using standing surface acoustic waves

A method based on standing surface acoustic waves (SSAWs) is proposed to pattern and manipulate microparticles into a three-dimensional (3D) matrix inside a microchamber. An optical prism is used to observe the 3D alignment and patterning of the microparticles in the vertical and horizontal planes simultaneously. The acoustic radiation force effectively patterns the microparticles into lines of 3D space or crystal-lattice-like matrix patterns. A microparticle can be positioned precisely at a specified vertical location by balancing the forces of acoustic radiation, drag, buoyancy, and gravity acting on the microparticle. Experiments and finite-element numerical simulations both show that the acoustic radiation force increases gradually from the bottom of the chamber to the top, and microparticles can be moved up or down simply by adjusting the applied SSAW power. Our method has great potential for acoustofluidics applications, building the large-scale structures associated with biological objects and artificial neuron networks

USE OF OSMOTIC TENSIOMETERS IN THE DETERMINATION OF SOIL-WATER CHARACTERISTIC CURVES

Soil-water characteristic curve (SWCC) correlates the water content of a soil to its soil suction, which is a very important property of unsaturated soils. Osmotic tensiometers (OTs) have shown their capability in high soil suction measurement. This study tried to use OT combined with a pressure plate and WP4C dewpoint potentiometer to determine the SWCC of a residual soil. Three OTs with different measuring ranges (900 kPa, 1200 kPa, 2300 kPa) were prepared for soil suction measurement. The temperature effect on the pressure variations of OTs was illustrated based on Flory-Huggins polymer theories and an appropriate calibration equation was proposed to eliminate the temperature effect on the accuracy of soil suction measurement using OT. The OT showed a fast response in soil suction measurement and the equilibrium can be established in 10–15 min during SWCC measurement. Comparison of the SWCC data obtained from the pressure plate, OT, and WP4C dewpoint potentiometer proves that the OT had good performance in the determination of SWCC, especially for the transition zone (i.e., 10–1500 kPa suction range), by providing more data points to define the SWCC in a shorter period. The results show that the usage of OT will shorten the time required for the determination of SWCC and could be considered as a new and reliable technique in SWCC measurement

Acoustofluidic closed-loop control of microparticles and cells using standing surface acoustic waves

Precise, automatic and reliable position control of micro-objects such as single particles, biological cells or bio-organisms is critical for applications in biotechnology and tissue engineering. However, conventional acoustofluidic techniques generally lack reliability and automation capability thus are often incapable of building an efficient and automated system where the biological cells need to be precisely manipulated in three dimensions (3D). To overcome these limitations, we developed an acoustofluidic closed-loop control system which is combined with computer vision techniques and standing surface acoustic waves (SSAWs) to implement selective, automatic and precise position control of an object, such as a single cell or microparticle in a microfluidic chamber. Position of the object is in situ extracted from living images that are captured from a video camera. By utilizing the closed-loop control strategy, the object is precisely moved to the desired location in 3D patterns or along designed trajectories by manipulating the phase angle and power signal of the SSAWs. Controlling of breast cancer cells has been conducted to verify the principle and biocompatibility of the control system. This system could be employed to build an automatic system for cell analysis, cell isolation, self-assembling of materials into complex microstructures, or lab-on-chip and organ-on-chip applications