576 research outputs found
Social Dialogue during the Financial and Economic Crisis: Results from the ILO/World Bank Inventory Using a Boolean Analysis on 44 Countries
Using information collected by the ILO/WB Inventory of policy responses to the financial and economic crisis on 44 countries, this paper identified conditions under which there was a social dialogue response to the financial crisis between 2008 and 2010. For that purpose, they use a particular definition of social dialogue, e.g. the emergence of tripartite nationallevel agreements or major agreements at the sector level; and rely on a Boolean analysis, e.g. a statistical method to detect relationships between variables, for example between answers to a questionnaire. Based on this definition, 13 out of 44 countries adopted national level agreement or major sector level agreement in formulating their crisis response, including seven in Europe, three in Americas, two in Asia, and one in Africa. Explanatory factors for the emergence of social dialogue include freedom of association, the severity of the crisis, and the strength of trade unions.Preface 1. Introduction 2. The evolution of national social dialogue in recent years 3. Coding the dependent variable 4. Coding the independent variables Tripartite legacy Serious crisis Union Strength Freedom of Association 5. Boolean analysis 6. Dealing with limited diversity 7. Country experiences Germany Switzerland Ireland Spain Czech Republic Hungary Brazil South Africa Japan Korea 8. Concluding remarks Reference
Microstructure of melt-processed Bi2Sr2CaCu2Oy and reaction mechanisms during post heat treatment
Phase compositions and microstructures of melt processed 2212 were studied. 2212 starting powder was cooled from temperatures between 910 °C and 1100 °C in air at rates ranging from 350 K/min to 0.083 K/min. The solidification sequence was established for all cooling rates. Under all conditions the Bi-free (Sr, Ca)CuO2 (01x1) is the primary phase. The one-layer solid solution 11905 nucleates on this phase. The residual liquid solidifies to a glassy state, decomposes into the eutectic of Cu2O and Bi2Sr2.1Ca0.9Ox, or reacts with the primary phase and the 11905 forming 2212 at high, intermediate, or low cooling rates, respectively. Post solidification heat treatment at 850 °C in air leads to partial remelting. The Cu-rich liquid reacts with 11905 and 01x1 forming 2212. Subsequent solid/solid reactions lead to a high volume fraction of 2212 with almost ideal 2 : 2 : 1 : 2 stoichiometr
Vortex lattice structures and pairing symmetry in Sr2RuO4
Recent experimental results indicate that superconductivity in Sr2RuO4 is
described by the p-wave E_u representation of the D_{4h} point group. Results
on the vortex lattice structures for this representation are presented. The
theoretical results are compared with experiment.Comment: 4 pages, 3 figures, M2S-HTSC-VI proceeding
Superconductivity in the Two-Dimensional - Model at Low Hole Doping
By combining a generalized Lanczos scheme with the variational Monte Carlo
method we can optimize the short- and long-range properties of the groundstate
separately. This allows us to measure the long-range order of the groundstate
of the - model as a function of the coupling constant , and identify
a region of finite d-wave superconducting long-range order. With a lattice size
of 50 sites we can reliably examine hole densities down to 0.16.Comment: 12 pages and 4 PostScript figures, ReVTeX 3.0, ETH-TH/94-1
Self-healing behavior of a polyelectrolyte-based lubricant additive for aqueous lubrication of oxide materials
We report on the self-healing behavior of a polyelectrolyte-based aqueous lubricant additive, poly(l-lysine)-graft-poly(ethylene glycol) (PLL-g-PEG), during aqueous lubrication of an oxide-based tribosystem. Combined pin-on-disk tribometry and fluorescence microscopy experiments have shown that stable lubricating performance was enabled by means of rapid healing of the worn tribopair surface by polymers dissolved in the adjoining bulk lubricant. This rapid ‘self-healing' of PLL-g-PEG is attributed to electrostatic interactions between the polycationic poly(l-lysine) (PLL) backbone of the polymer and negatively charged oxide surface. In contrast, a similar healing effect was not readily achievable in the case of methoxy-poly(ethylene glycol)-trimethylsilylether (Sil-PEG), a lubricant additive that is covalently bonded to the surface prior to tribological stres
Ferromagnetism in the two dimensional t-t' Hubbard model at the Van Hove density
Using an improved version of the projection quantum Monte Carlo technique, we
study the square-lattice Hubbard model with nearest-neighbor hopping t and
next-nearest-neighbor hopping t', by simulation of lattices with up to 20 X 20
sites. For a given R=2t'/t, we consider that filling which leads to a singular
density of states of the noninteracting problem. For repulsive interactions, we
find an itinerant ferromagnet (antiferromagnet) for R=0.94 (R=0.2). This is
consistent with the prediction of the T-matrix approximation, which sums the
most singular set of diagrams.Comment: 10 pages, RevTeX 3.0 + a single postscript file with all figure
Design, Manufacture and Wind Tunnel Test of a Modular FishBAC Wing with Novel 3D Printed Skins
This paper introduces a new modular Fish Bone Active Camber morphing wing with novel 3D printed skin panels. These skin panels are printed using two different Thermoplastic Polyurethane (TPU) formulations: a soft, high strain formulation for the deformable membrane of the skin, reinforced with a stiffer formulation for the stringers and mounting tabs. Additionally, this is the first FishBAC device designed to be modular in its installation and actuation. Therefore, all components can be removed and replaced for maintenance purposes without having to remove or disassemble other parts. A 1 m span, 0.27 m chord morphing wing with a 25% chord FishBAC was built and tested mechanically and in a low-speed wind tunnel. Results show that the new design is capable of achieving the same large changes in airfoil lift coefficient (approximate ΔCL≈0.55) with a low drag penalty seen in previous FishBAC work, but with a much simpler, practical and modular design. Additionally, the device shows a change in the pitching moment coefficient of ΔCM≈0.1, which shows the potential that the FishBAC has as a control surface
Vortex Charging Effect in a Chiral -Wave Superconductor
Quasiparticle states around a single vortex in a -wave
superconductor are studied on the basis of the Bogoliubov-de Gennes (BdG)
theory, where both charge and current screenings are taken into account. Due to
the violation of time reversal symmetry, there are two types of vortices which
are distinguished by their winding orientations relative to the angular
momentum of the chiral Cooper pair. The BdG solution shows that the charges of
the two types of vortices are quite different, reflecting the rotating Cooper
pair of the -wave paring state.Comment: 10 pages, 5 figures, revtex, to be published in Phys. Rev.
d-Wave Pairing Correlation in the Two-Dimensional t-J Model
The pair-pair correlation function of the two-dimensional t-J model is
studied by using the power-Lanczos method and an assumption of monotonic
behavior. In comparison with the results of the ideal Fermi gas, we conclude
that the 2D t-J model does not have long range d-wave superconducting
correlation in the interesting parameter range of . Implications
of this result will also be discussed.Comment: 4 pages, 6 figures, accepted by PR
- …