719 research outputs found
Dip coating process: Silicon sheet growth development for the large-area silicon sheet task of the low-cost silicon solar array project
The research program to investigate the technical and economic feasibility of producing solar-cell-quality sheet silicon by dip-coating one surface of carbonized ceramic substrates with a thin layer of large-grain polycrystalline silicon is reported. The initial effort concentrated on the design and construction of the experimental dip-coating facility. The design was completed and its experimental features are discussed. Current status of the program is reported, including progress toward solar cell junction diffusion and miscellaneous ceramic substrate procurement
Dip coating process: Silicon sheet growth development for the large-area silicon sheet task of the low-cost silicon solar array project
To date, an experimental dip-coating facility was constructed. Using this facility, relatively thin (1 mm) mullite and alumina substrates were successfully dip-coated with 2.5 - 3.0 ohm-cm, p-type silicon with areas of approximately 20 sq cm. The thickness and grain size of these coatings are influenced by the temperature of the melt and the rate at which the substrate is pulled from the melt. One mullite substrate had dendrite-like crystallites of the order of 1 mm wide and 1 to 2 cm long. Their axes were aligned along the direction of pulling. A large variety of substrate materials were purchased or developed enabling the program to commence a substrate definition evaluation. Due to the insulating nature of the substrate, the bottom layer of the p-n junction may have to be made via the top surface. The feasibility of accomplishing this was demonstrated using single crystal wafers
Trends in stratospheric minor constituents
Photochemical models predict that increasing source gas concentrations are also expected to lead to changes in the concentrations of both catalytically active radical species (such as NO2, ClO, and OH) and inactive reservoir species (such as HNO3, HCl, and H2O). For simplicity, we will refer to all these as trace species. Those species that are expected to have increasing concentration levels are investigated. Additionally, the trace species concentration levels are monitored for unexpected changes on the basis of the measure increase in source gases. Carrying out these investigations is difficult due to the limited data base of measurements of stratospheric trace species. In situ measurements are made only infrequently, and there are few satelliteborne measurements, most over a time space insufficient for trend determination. Instead, ground-based measurements of column content must be used for many species, and interpretation is complicated by contributions from the troposphere or mesosphere or both. In this chapter, we examine existing measurements as published or tabulated
Serum anti-Müllerian hormone concentrations before and after treatment of an ovarian granulosa cell tumour in a cat
Case summary A 15-year-old female cat was presented for investigation of progressive behavioural changes, polyuria, polydipsia and periuria. An ovarian granulosa cell tumour was identified and the cat underwent therapeutic ovariohysterectomy (OHE). The cat’s clinical signs resolved, but 6 months later it was diagnosed as having an anaplastic astrocytoma and was euthanased. Serum anti-Müllerian hormone (AMH) concentration prior to OHE was increased vs a control group of entire and neutered female cats. Following OHE, serum AMH concentration decreased to <1% of the original value. Relevance and novel information Serum AMH measurement may represent a novel diagnostic and monitoring tool for functional ovarian neoplasms in cats
Rare regions of the susceptible-infected-susceptible model on Barabási-Albert networks
I extend a previous work to susceptible-infected-susceptible (SIS) models on weighted Barabási-Albert scale-free networks. Numerical evidence is provided that phases with slow, power-law dynamics emerge as the consequence of quenched disorder and tree topologies studied previously with the contact process. I compare simulation results with spectral analysis of the networks and show that the quenched mean-field (QMF) approximation provides a reliable, relatively fast method to explore activity clustering. This suggests that QMF can be used for describing rare-region effects due to network inhomogeneities. Finite-size study of the QMF shows the expected disappearance of the epidemic threshold λc in the thermodynamic limit and an inverse participation ratio ∼0.25, meaning localization in case of disassortative weight scheme. Contrarily, for the multiplicative weights and the unweighted trees, this value vanishes in the thermodynamic limit, suggesting only weak rare-region effects in agreement with the dynamical simulations. Strong corrections to the mean-field behavior in case of disassortative weights explains the concave shape of the order parameter ρ(λ) at the transition point. Application of this method to other models may reveal interesting rare-region effects, Griffiths phases as the consequence of quenched topological heterogeneities
Dip coating process: Silicon sheet growth development for the large-area silicon sheet task of the low-cost silicon solar array project
The technical and economic feasibility of producing solar cell quality sheet silicon by dip-coating one surface of carbonized ceramic substrates with a thin layer of large grain polycrystalline silicon was investigated. The dip-coating methods studied were directed toward a minimum cost process with the ultimate objective of producing solar cells with a conversion efficiency of 10% or greater. The technique shows excellent promise for low cost, labor-saving, scale-up potentialities and would provide an end product of sheet silicon with a rigid and strong supportive backing. An experimental dip-coating facility was designed and constructed, several substrates were successfully dip-coated with areas as large as 25 sq cm and thicknesses of 12 micron to 250 micron. There appears to be no serious limitation on the area of a substrate that could be coated. Of the various substrate materials dip-coated, mullite appears to best satisfy the requirement of the program. An inexpensive process was developed for producing mullite in the desired geometry
Simonsenia aveniformis sp nov (Bacillariophyceae), molecular phylogeny and systematics of the genus, and a new type of canal raphe system
The genus Simonsenia is reviewed and S. aveniformis described as new for science by light and electron microscopy. The new species originated from estuarine environments in southern Iberia (Atlantic coast) and was isolated into culture. In LM, Simonsenia resembles Nitzschia, with bridges (fibulae) beneath the raphe, which is marginal. It is only electron microscope (EM) examination that reveals the true structure of the raphe system, which consists of a raphe canal raised on a keel (wing), supported by rib like braces (fenestral bars) and tube-like portulae; between the portulae the keel is perforated by open windows (fenestrae). Based on the presence of portulae and a fenestrated keel, Simonsenia has been proposed to be intermediate between Bacillariaceae and Surirellaceae. However, an rbcL phylogeny revealed that Simonsenia belongs firmly in the Bacillariaceae, with which it shares a similar chloroplast arrangement, rather than in the Surirellaceae. Lack of homology between the surirelloid and simonsenioid keels is reflected in subtle differences in the morphology and ontogeny of the portulae and fenestrae. The diversity of Simonsenia has probably been underestimated, particularly in the marine environment.Polish National Science Centre in Cracow within the Maestro program [N 2012/04/A/ST10/00544]; Sciences and Technologies Foundation-FCT (Portugal) [SFRH/BD/62405/2009]info:eu-repo/semantics/publishedVersio
Energy for a Shared Development Agenda: Global Scenarios and Governance Implications
This report combines a global assessment of energy scenarios up to 2050, case studies of energy access and low-carbon efforts around the world, and a review of the technological shifts, investments, policies and governance structures needed to bring energy to all.
How can the world meet energy needs for human and economic development in a way that is compatible with sustainable development? What is required is nothing less than a massive transformation of energy systems and rapid turnovers of infrastructure and technology, all of which must be achieved while staying within climate and resource constraints.
Though the challenge is great, the energy and sustainability scenarios in this report show that it can be met. However, while these scenarios sketch out transformation pathways in broad strokes, the devil is in the detail. This study also explores how to successfully implement change, via case studies of energy transformation and reviews of policy mechanisms and governance frameworks.
Over the coming decade, policymakers around the world need to build a shared development agenda to address these challenges. It is hoped that this study will help to lay the foundations for such an effort
Framework Report: The AIDS Accountability Workplace Scorecard, September 2011
The aim of the AIDS Accountability Workplace Scorecard is to improve HIV and AIDS workplace programmes in
the countries and sectors most affected by the disease, and improve the health of employees, their families
and communities. Through this initiative we will: / 1. Provide tools for HIV and AIDS workplace programme monitoring and evaluation
AAI has developed scorecard tools for small, medium and large workplaces, which can be used to assess a
global, regional or national HIV and AIDS programme or interventions at a specific workplace site. The
scorecards can serve as both internal monitoring and evaluation tools and as assessments to present to
stakeholders within and outside the organization. / 2. Publish annual Rankings of HIV and AIDS Workplace Programmes
Scorecard users who wish to receive a ranking analysis and recommendations for how to improve their
programmes can submit their scorecards to AAI. AAI ‘s ranking analysis will allow users to compare their
performance with others and over time also measure their own progress. Respondents will be encouraged to
publish their ranking in AAI’s yearly Ranking Reports. / 3. Share good practice
The knowledge and good practices generated through the published rankings will be used to stimulate
improved HIV and AIDS Workplace Programmes worldwide. Large networks of companies, trade union
confederations, and national and international organizations can use the scorecard as a common framework
for monitoring and evaluation of workplace programmes
- …