The structure of liquid thiophene from total neutron scattering

The structure of pure liquid thiophene is revealed by using a combination of total neutron scattering experiments with isotopic substitution and molecular simulations via the next generation empirical potential refinement software, Dissolve. In the liquid, thiophene presents three principle local structural motifs within the first solvation shell, in plane and out of the plane of the thiophene ring. Firstly, above/below the ring plane thiophenes present a single H towards the π cloud, due to a combination of electrostatic and dispersion interactions. Secondly, around the ring plane, perpendicular thiophene molecules find 5 preferred sites driven by bifurcated C-H⋯S interactions, showing that hydrogen-sulfur bonding prevails over the charge asymmetry created by the heteroatom. Finally, parallel thiophenes sit above and below the ring, excluded from directly above the ring center and above the sulfur

Hydrophobic Hydration of the Hydrocarbon Adamantane in Amorphous Ice

Hydrophobic molecules are by definition difficult to hydrate. Previous studies in the area of hydrophobic hydration have therefore often relied on using amphiphilic molecules where the hydrophilic part of a molecule enabled the solubility in liquid water. Here we show that the hydrophobic adamantane (C10H16) molecule can be fully hydrated through vapour codeposition with water onto a cryogenic substrate at 80 K resulting in the matrix isolation of adamantane in amorphous ice. Using neutron diffraction in combination with the isotopic substitution method and the empirical potential structure refinement technique, we find that the first hydration shell of adamantane is well structured consisting of a hydrogen-bonded cage of 28 water molecules that is also found in cubic structure II clathrate hydrates. The four hexagonal faces of the 51264 cage are situated above the four methine (CH) groups of adamantane whereas the methylene (CH2) groups are positioned below the edges of two adjoining pentagonal faces. The oxygen atoms of the 28 water molecules can be categorised on the basis of symmetry equivalences as twelve A, twelve B and four C oxygens. The water molecules of the first hydration shell display orientations consistent with those expected for a clathrate-hydrate-type cage, but also unfavourable ones with respect to the hydrogen bonding between the water molecules. Annealing the samples at 140 K, which is just below the crystallisation temperature of the matrix, removes the unfavourable orientations and leads to a slight increase of the structural order of the first hydration shell. The very closest water molecules display a tendency for their dipole moments to point towards the adamantane which is attributed to steric effects. Other than this, no significant polarisation effects are observed which is consistent with weak interactions between adamantane and the amorphous ice matrix. FT-IR spectroscopy shows that the incorporation of adamantane into amorphous ice leads to a weakening of the hydrogen bonds. In summary, the matrix-isolation of the highly symmetric adamantane in amorphous ice provides an interesting test case for hydrophobic hydration. Studying the structure and spectroscopic properties of water at the interface with hydrophobic hydrocarbons is also relevant for astrophysical environments, such as comets or the interstellar medium, where amorphous ice and hydrocarbons have been shown to coexist in large quantities

Weak Interactions in Dimethyl Sulfoxide (DMSO)-Tertiary Amide Solutions: The Versatility of DMSO as a Solvent

The structures of equimolar mixtures of the commonly used polar aprotic solvents dimethylformamide (DMF) and dimethylacetamide (DMAc) in dimethyl sulfoxide (DMSO) have been investigated via neutron diffraction augmented by extensive hydrogen/deuterium isotopic substitution. Detailed 3-dimensional structural models of these solutions have been derived from the neutron data via Empirical Potential Structure Refinement (EPSR). The intermolecular center-of-mass (CoM) distributions show that the first coordination shell of the amides comprises ∼13-14 neighbors, of which approximately half are DMSO. In spite of this near ideal coordination shell mixing, the changes to the amide-amide structure are found to be relatively subtle when compared to the pure liquids. Analysis of specific intermolecular atom-atom correlations allows quantitative interpretation of the competition between weak interactions in the solution. We find a hierarchy of formic and methyl C-H···O hydrogen bonds forms the dominant local motifs, with peak positions in the range of 2.5-3.0 Å. We also observe a rich variety of steric and dispersion interactions, including those involving the O═C-N amide π-backbones. This detailed insight into the structural landscape of these important liquids demonstrates the versatility of DMSO as a solvent and the remarkable sensitivity of neutron diffraction, which is critical for understanding weak intermolecular interactions at the nanoscale and thereby tailoring solvent properties to specific applications

Strong structuring arising from weak cooperative O-H···π and C-H···O hydrogen bonding in benzene-methanol solution

Weak hydrogen bonds, such as O-H···π and C-H···O, are thought to direct biochemical assembly, molecular recognition, and chemical selectivity but are seldom observed in solution. We have used neutron diffraction combined with H/D isotopic substitution to obtain a detailed spatial and orientational picture of the structure of benzene-methanol mixtures. Our analysis reveals that methanol fully solvates and surrounds each benzene molecule. The expected O-H···π interaction is highly localised and directional, with the methanol hydroxyl bond aligned normal to the aromatic plane and the hydrogen at a distance of 2.30 Å from the ring centroid. Simultaneously, the tendency of methanol to form chain and cyclic motifs in the bulk liquid is manifest in a highly templated solvation structure in the plane of the ring. The methanol molecules surround the benzene so that the O-H bonds are coplanar with the aromatic ring while the oxygens interact with C-H groups through simultaneous bifurcated hydrogen bonds. This demonstrates that weak hydrogen bonding can modulate existing stronger interactions to give rise to highly ordered cooperative structural motifs that persist in the liquid phase

The local ordering of polar solvents around crystalline carbon nitride nanosheets in solution

The crystalline graphitic carbon nitride, poly-triazine imide (PTI) is highly unusual among layered materials since it is spontaneously soluble in aprotic, polar solvents including dimethylformamide (DMF). The PTI material consists of layers of carbon nitride intercalated with LiBr. When dissolved, the resulting solutions consist of dissolved, luminescent single to multilayer nanosheets of around 60–125 nm in diameter and Li+ and Br− ions originating from the intercalating salt. To understand this unique solubility, the structure of these solutions has been investigated by high-energy X-ray and neutron diffraction. Although the diffraction patterns are dominated by inter-solvent correlations there are clear differences between the X-ray diffraction data of the PTI solution and the solvent in the 4–6 Å −1 range, with real space differences persisting to at least 10 Å. Structural modelling using both neutron and X-ray datasets as a constraint reveal the formation of distinct, dense solvation shells surrounding the nanoparticles with a layer of Br − close to the PTI-solvent interface. This solvent ordering provides a configuration that is energetically favourable underpinning thermodynamically driven PTI dissolution. This article is part of the theme issue 'Exploring the length scales, timescales and chemistry of challenging materials (Part 2)'

Liquid phase blending of metal-organic frameworks.

The liquid and glass states of metal-organic frameworks (MOFs) have recently become of interest due to the potential for liquid-phase separations and ion transport, alongside the fundamental nature of the latter as a new, fourth category of melt-quenched glass. Here we show that the MOF liquid state can be blended with another MOF component, resulting in a domain structured MOF glass with a single, tailorable glass transition. Intra-domain connectivity and short range order is confirmed by nuclear magnetic resonance spectroscopy and pair distribution function measurements. The interfacial binding between MOF domains in the glass state is evidenced by electron tomography, and the relationship between domain size and Tg investigated. Nanoindentation experiments are also performed to place this new class of MOF materials into context with organic blends and inorganic alloys

The local ordering of polar solvents around crystalline carbon nitride nanosheets in solution

The crystalline graphitic carbon nitride, poly-triazine imide (PTI) is highly unusual among layered materials since it is spontaneously soluble in aprotic, polar solvents including dimethylformamide (DMF). The PTI material consists of layers of carbon nitride intercalated with LiBr. When dissolved, the resulting solutions consist of dissolved, luminescent single to multilayer nanosheets of around 60–125 nm in diameter and Li+ and Br− ions originating from the intercalating salt. To understand this unique solubility, the structure of these solutions has been investigated by high-energy X-ray and neutron diffraction. Although the diffraction patterns are dominated by inter-solvent correlations there are clear differences between the X-ray diffraction data of the PTI solution and the solvent in the 4–6 Å−1 range, with real space differences persisting to at least 10 Å. Structural modelling using both neutron and X-ray datasets as a constraint reveal the formation of distinct, dense solvation shells surrounding the nanoparticles with a layer of Br−close to the PTI-solvent interface. This solvent ordering provides a configuration that is energetically favourable underpinning thermodynamically driven PTI dissolution. This article is part of the theme issue 'Exploring the length scales, timescales and chemistry of challenging materials (Part 2)'

Bulk and Confined Benzene-Cyclohexane Mixtures Studied by an Integrated Total Neutron Scattering and NMR Method

From Springer Nature via Jisc Publications RouterHistory: accepted 2021-04-10, registration 2021-04-10, pub-electronic 2021-04-23, online 2021-04-23, pub-print 2021-08Publication status: PublishedFunder: Engineering and Physical Sciences Research Council; doi: http://dx.doi.org/10.13039/501100000266; Grant(s): N008995, N009304Abstract: Herein mixtures of cyclohexane and benzene have been investigated in both the bulk liquid phase and when confined in MCM-41 mesopores. The bulk mixtures have been studied using total neutron scattering (TNS), and the confined mixtures have been studied by a new flow-utilising, integrated TNS and NMR system (Flow NeuNMR), all systems have been analysed using empirical potential structure refinement (EPSR). The Flow NeuNMR setup provided precise time-resolved chemical sample composition through NMR, overcoming the difficulties of ensuring compositional consistency for computational simulation of data ordinarily found in TNS experiments of changing chemical composition—such as chemical reactions. Unique to the liquid mixtures, perpendicularly oriented benzene molecules have been found at short distances from the cyclohexane rings in the regions perpendicular to the carbon–carbon bonds. Upon confinement of the hydrocarbon mixtures, a stronger parallel orientational preference of unlike molecular dimers, at short distances, has been found. At longer first coordination shell distances, the like benzene molecular spatial organisation within the mixture has also found to be altered upon confinement

Community based distribution of oral HIV self-testing kits in Zambia: a cluster-randomised trial nested in four HPTN 071 (PopART) intervention communities

Background The HPTN 071 (PopART) cluster-randomised trial provided door-to-door HIV testing services to a large proportion of individuals residing in 21 intervention communities in Zambia and South Africa from 2014 to 2017 and reached the UNAIDS first 90 target among women in Zambia, yet gaps remained among men and young adults. This cluster-randomised study nested in the HPTN 071 (PopART) trial sought to increase knowledge of HIV status across all groups by offering the choice of oral HIV self-testing in addition to routine door-to-door HIV testing services. Methods We nested this cluster-randomised trial in four HTPN 071 (PopART) intervention communities in northern Zambia. 66 zones (clusters) in these communities were randomly allocated (1:1) to either oral HIV self-testing plus routine door-to-door HIV testing services (HIV self-testing group) or the PopART standard of care of door-to-door HIV testing services alone (non- HIV self-testing group) over a 3-month period. All individuals aged 16 years or older were eligible for HIV testing. Randomisation was achieved by randomly selecting one allocation from a list of 10 000 possible allocations during a public ceremony. In HIV self-testing zones, trained lay-counsellors (known as community HIV care providers) visited households and offered eligible individuals the choice of HIV testing using HIV self-testing or routine door-to-door HIV testing services. For individuals aged 18 years or older whose partner was absent during the household visit, an HIV self-test kit could be left for secondary distribution to the absent partner. The primary outcome was knowledge of HIV status (defined as self-reporting HIV positive to the community HIV care providers or accepting an offer of HIV testing services). Outcomes were measured among households that were first visited, and individuals first enumerated as a household member during the HIV self-testing intervention period. We analysed data at the individual level using population-average logistic regression models, accounting for clustering of outcomes by zone, to estimate the effect of the intervention. This trial is registered with ClinicalTrials.gov, number NCT02994329. Findings Between Feb 1, and April 30, 2017, the community HIV care providers enumerated 13 267 eligible individuals in the HIV self-testing group and 13 706 in the non-HIV self-testing group. After intervention implementation, 9027 (68%) of 13 267 in the HIV self-testing group had knowledge of HIV status compared with 8952 (65%) of 13 706 in the non-HIV self-testing group (adjusted odds ratio 1·30, 95% CI 1·03–1·65; p=0·03). The effect differed by sex (pinteraction=0·01). Among men, knowledge of HIV status was higher in the HIV self-testing group than in the non-HIV self-testing group (3843 [60%] of 6368 vs 3571 [55%] of 6486; adjusted odds ratio 1·31, 95% CI 1·07–1·60; p=0·01). There was no evidence of a between-group difference among female participants. Interpretation Providing a choice of HIV self-testing during delivery of door-to-door HIV testing services increased knowledge of HIV status, driven by an effect among men. Lay counsellors have a vital role to play in adapting HIV self-testing interventions to local context

Projected outcomes of universal testing and treatment in a generalised HIV epidemic in Zambia and South Africa (the HPTN 071 [PopART] trial): a modelling study

Background The long-term impact of universal home-based testing and treatment as part of universal testing and treatment (UTT) on HIV incidence is unknown. We made projections using a detailed individual-based model of the effect of the intervention delivered in the HPTN 071 (PopART) cluster-randomised trial. Methods In this modelling study, we fitted an individual-based model to the HIV epidemic and HIV care cascade in 21 high prevalence communities in Zambia and South Africa that were part of the PopART cluster-randomised trial (intervention period Nov 1, 2013, to Dec 31, 2017). The model represents coverage of home-based testing and counselling by age and sex, delivered as part of the trial, antiretroviral therapy (ART) uptake, and any changes in national guidelines on ART eligibility. In PopART, communities were randomly assigned to one of three arms: arm A received the full PopART intervention for all individuals who tested positive for HIV, arm B received the intervention with ART provided in accordance with national guidelines, and arm C received standard of care. We fitted the model to trial data twice using Approximate Bayesian Computation, once before data unblinding and then again after data unblinding. We compared projections of intervention impact with observed effects, and for four different scenarios of UTT up to Jan 1, 2030 in the study communities. Findings Compared with standard of care, a 51% (95% credible interval 40–60) reduction in HIV incidence is projected if the trial intervention (arms A and B combined) is continued from 2020 to 2030, over and above a declining trend in HIV incidence under standard of care. Interpretation A widespread and continued commitment to UTT via home-based testing and counselling can have a substantial effect on HIV incidence in high prevalence communities. Funding National Institute of Allergy and Infectious Diseases, US President's Emergency Plan for AIDS Relief, International Initiative for Impact Evaluation, Bill & Melinda Gates Foundation, National Institute on Drug Abuse, and National Institute of Mental Health