21 research outputs found
Estimation and Mapping the Rubber Trees Growth Distribution using Multi Sensor Imagery With Remote Sensing and GIS Analysis
The plantation of rubber tree in different countries throughout the world are expanded rapidly in areas that are not known before in planting such as these vegetation species. Estimating and mapping the distribution of rubber trees stand ages in these regions is very necessary to get better understanding of the effects of the changes of land cover on the Carbon and Water Cycle and also the productivity of the latex in different ages. Many remote sensing techniques that have been used to estimate the land cover / land use for mapping and monitoring the distribution of rubber trees growth based on different remote sensing classification algorithms (Maximum likelihood, SAM classification, Decision Tree and Mahalanobis Distance) with different types of data (Multispectral, Hyperspectral or statistical) by using many sensor
Easy to use remote sensing and GIS analysis for landslide risk assessment
Many countries throughout the world suffered from the natural risks, they cause a large damage in property and loss in human lives, we cannot prevent the occurring of these hazards but, it is possible to reduce their affect in saving human lives and reducing the damage in properties. Several methodologies have been conducted to predict the suitable model for landslide assessment. The susceptibility maps of landslide hazard generated by combining the remote sensed data with the capability of GIS (geographic information system). We discussed different type of algorithms and factors for modeling the prediction of landslide risk assessment such as SVM (support vector machine), DT (decision tree), ANFIS (adaptive neural-fuzzy inference system), AHP (analytic hierarchy process), ANN (artificial neural network), probability frequency of landslides occurrence factors model and empirical model. The study evaluated various parameters that are responsible for landslide occurrence and the weighting for each parameter and its importance to probable of landslide activity. AHP method, Weights of evidence model, and back propagation method have been applied for weighting the factors. We found that using ANN algorithm with more than ten factors will give high accuracy result especially if the validation performs by field surveys data
Multi-Fusion algorithms for Detecting Land Surface Pattern Changes Using Multi-High Spatial Resolution Images and Remote Sensing Analysis
Producing accurate Land-Use and Land-Cover (LU/LC) maps using low-spatial-resolution images is a difficult task. Pan-sharpening is crucial for estimating LU/LC patterns. This study aimed to identify the most precise procedure for estimating LU/LC by adopting two fusion approaches, namely Color Normalized Brovey (BM) and Gram-Schmidt Spectral Sharpening (GS), on high-spatial-resolution Multi-sensor and Multi-spectral images, such as (1) the Unmanned Aerial Vehicle (UAV) system, (2) the WorldView-2 satellite system, and (3) low-spatial-resolution images like the Sentinel-2 satellite, to generate six levels of fused images with the three original multi-spectral images. The Maximum Likelihood method (ML) was used for classifying all nine images. A confusion matrix was used to evaluate the accuracy of each single classified image. The obtained results were statistically compared to determine the most reliable, accurate, and appropriate LU/LC map and procedure. It was found that applying GS to the fused image, which integrated WorldView-2 and Sentinel-2 satellite images and was classified by the ML method, produced the most accurate results. This procedure has an overall accuracy of 88.47% and a kappa coefficient of 0.85. However, the overall accuracies of the three classified multispectral images range between 86.84% to 76.49%. Furthermore, the accuracy assessment of the fused images by the Brovey method and the rest of the GS method and classified by the ML method ranges between 85.75% to 76.68%. This proposed procedure shows a lot of promise in the academic sphere for mapping LU/LC. Previous researchers have mostly used satellite images or datasets with similar spatial and spectral resolution, at least for tropical areas like the study area of this research, to detect land surface patterns. However, no one has previously investigated and examined the use and application of different datasets that have different spectral and spatial resolutions and their accuracy for mapping LU/LC. This study has successfully adopted different datasets provided by different sensors with varying spectral and spatial levels to investigate this. Doi: 10.28991/ESJ-2023-07-04-013 Full Text: PD
Fusion Landsat-8 Thermal TIRS and OLI Datasets for Superior Monitoring and Change Detection using Remote Sensing
Currently, updating the change detection (CD) of land use/land cover (LU/LC) geospatial information with high accuracy outcomes is important and very confusing with the different classification methods, datasets, satellite images, and ancillary dataset types available. However, using just the low spatial resolution visible bands of the remotely sensed images will not provide good information with high accuracy. Remotely sensed thermal data contains very valuable information to monitor and investigate the CD of the LU/LC. So, it needs to involve the thermal datasets for better outcomes. Fusion plays a big role to map the CD. Therefore, this study aims to find out a refining method for estimating the accurate CD method of the LU/LC patterns by investigating the integration of the effectiveness of the thermal satellite data with visible datasets by (a) adopting a noise removal model, (b) satellite images resampling, (c) image fusion, combining and integrating between the visible and thermal images using the Grim Schmidt spectral (GS) method, (d) applying image classification using Mahalanobis distances (MH), Maximum likelihood (ML) and artificial neural network (ANN) classifiers on datasets captured from the Landsat-8 TIRS and OLI satellite system, these images were captured from operational land imager (OLI) and the thermal infrared (TIRS) sensors of 2015 and 2020 to generate about of twelve LC maps. (e) The comparison was made among all the twelve classifiers' results. The results reveal that adopting the ANN technique on the integrated images of the combined TIRS and OLI datasets has the highest accuracy compared to the rest of the applied image classification approaches. The obtained overall accuracy was 96.31% and 98.40%, and the kappa coefficients were (0.94) and (0.97) for the years 2015 and 2020, respectively. However, the ML classifier obtains better results compared to the MH approach. The image fusion and integration of the thermal images improve the accuracy results by 5%–6% from the proposed method better than using low spatial-resolution visible datasets alone. Doi: 10.28991/ESJ-2023-07-02-09 Full Text: PD
Automatic keypoints extraction from UAV image with refine and improved scale invariant features transform (RI-SIFT)
In this study, the performance of Refine and Improved Scale Invariant Features Transform (RI-SIFT) recently developed and patented to automatically extract key points from UAV images was examined. First the RI- SIFT algorithm was used to detect and extract CPs from two overlapping UAV images. To evaluate the performance of RI-SIFT, the original SIFT which employs nearest neighbour (NN) algorithms was used to extract keypoints from the same adjacent UA V images. Finally, the quality of the points extracted with RI- SIFT was evaluated by feeding them into polynomial, adjust, and spline transform mosaicing algorithms to stitch the images. The result indicates that RI-SIFT performed better than SIFT and NN with 271, 1415, and 1557points extracted respectively. Also, spline transform gives the most accurate mosaicked image with subpixel RMSE value of 1.0925 pixels equivalent to 0.10051m, followed by adjust transform with root mean square error (RSME) value of 1.956821 pixel (0.17611m) while polynomial transform produced the least accuracy result
Easy To Use Remote Sensing and GIS Analysis for Landslide Risk Assessment.
الكثير من البلدان حول العالم تعاني من المخاطر الطبيعية, فهي تؤدي الى الكثير من الخسارة في الممتلكات والارواح, نحن لا نستطيع ان نمنع حدوث مثل هكذا مخاطر لكن, من الممكن تقليل اثارها والمحافظة على ارواح الناس وتقليل الخسارة بالممتلكات. العديد من الطرق اجريت لتخمين النموذج المناسب لتقييم انزلاق الارض. خرائط الحساسة للانزلاق الارضي انشأت من خلال دمج بين معلومات التحسس النائي مع امكانية نظم المعلومات الجغرافية .لقد ناقشنا مختلف انواع الخوارزميات والمعاملات لنمذجة توقع وتقييم خطر الانزلاق الارضي مثل دعم ناقلات الالة ,شجرة اتخاذ القرار ,التكيف لنظام الاستدلال العصبية الغامض, عملية التحليل الهرمي وشبكة الاعصاب الاصطناعية, نموذج معملات احتمالية تردد حدوث الانزلاق الارضي, والنموذج التجريبي. الدراسة تقيم مختلف المعاملات المسؤولة عن حدوث الانزلاق الارضي وترجيح كل معامل واھميتها لاحتمال نشاط انزلاق ارضي. طريقة عملية التحليل الهرمي , نموذج ترجيح الدليل, و الانتشار العكسي قد طبقت لترجيح العوامل .وجدنا ان استخدام طريقة شبكة الاعصاب الاصطناعية مع اكثر من عشر معاملات سوف تعطي دقة عالية خاصة اذا تم التحقيق بواسطة معلومات حقلية. Many countries throughout the world suffered from the natural risks, they cause a large damage in property and loss in human lives, we cannot prevent the occurring of these hazards but, it is possible to reduce their affect in saving human lives and reducing the damage in properties. Several methodologies have been conducted to predict the suitable model for landslide assessment. The susceptibility maps of landslide hazard generated by combining the remote sensed data with the capability of GIS (geographic information system). We discussed different type of algorithms and factors for modeling the prediction of landslide risk assessment such as SVM (support vector machine), DT (decision tree), ANFIS (adaptive neural-fuzzy inference system), AHP (analytic hierarchy process), ANN (artificial neural network), probability frequency of landslides occurrence factors model and empirical model. The study evaluated various parameters that are responsible for landslide occurrence and the weighting for each parameter and its importance to probable of landslide activity. AHP method, Weights of evidence model, and back propagation method have been applied for weighting the factors. We found that using ANN algorithm with more than ten factors will give high accuracy result especially if the validation performs by field surveys data
Integrating Highly Spatial Satellite Image for 3D Buildings Modelling Using Geospatial Algorithms and Architecture Environment
The growing demand for current and precise geographic information that pertains to urban areas has given rise to a significant interest in digital surface models that exhibit a high level of detail. Traditional methods for creating digital surface models are insufficient to reflect the details of earth’s features. These models only represent three-dimensional objects in a single texture and fail to offer a realistic depiction of the real world. Furthermore, the need for current and precise geographic information regarding urban areas has been increasing significantly. This study proposes a new technique to address this problem, which involves integrating remote sensing, Geographic Information Systems (GIS), and Architecture Environment software environments to generate a detailed three-dimensional model. The processing of this study starts with: 1) Downloading high-resolution satellite imagery; 2) Collecting ground truth datasets from fieldwork; 3) Imaging nose removing; 4) Generating a Two-dimensional Model to create a digital surface model in GIS using the extracted building outlines; 5) Converting the model into multi-patch layers to construct a 3D model for each object separately. The results show that the 3D model obtained through this method is highly detailed and effective for various applications, including environmental studies, urban development, expansion planning, and shape understanding tasks.Godkänd;2023;Nivå 0;2023-05-04 (joosat);Licens fulltext: CC BY License</p
Analysis of Remotely Sensed Imagery and Architecture Environment for Modelling 3D Detailed Buildings Using Geospatial Techniques
The use of three-dimensional maps is more effective than two-dimensional maps in representing the Earth’s surface. However, the traditional methods used to create digital surface models are not efficient for capturing the details of Earth’s features. This is because they represent only three-dimensional objects in a single texture and do not provide a realistic representation of the real world. Additionally, there is a growing demand for up-to-date and accurate geo-information, particularly in urban areas. To address this challenge, a new technique is proposed in this study that involves integrating remote sensing, Geographic Information System, and Architecture Environment software to generate a highly-detailed three-dimensional model. The method described in this study includes several steps such as acquiring high-resolution satellite imagery, gathering ground truth data, performing radiometric and geometric corrections during image preprocessing, producing a 2D map of the region of interest, constructing a digital surface model by extending the building outlines, and transforming the model into multi-patch layers to create a 3D model for each object individually. The research findings indicate that the digital surface model obtained with comprehensive information is suitable for different purposes, such as environmental research, urban development and expansion planning, and shape recognition tasks.Godkänd;2023;Nivå 0;2023-06-05 (joosat);Licens fulltext: CC BY License</p
Easy To Use Remote Sensing and GIS Analysis for Landslide Risk Assessment.
Many countries throughout the world suffered from the natural risks, they cause a large damage in property and loss in human lives, we cannot prevent the occurring of these hazards but, it is possible to reduce their affect in saving human lives and reducing the damage in properties. Several methodologies have been conducted to predict the suitable model for landslide assessment. The susceptibility maps of landslide hazard generated by combining the remote sensed data with the capability of GIS (geographic information system). We discussed different type of algorithms and factors for modeling the prediction of landslide risk assessment such as SVM (support vector machine), DT (decision tree), ANFIS (adaptive neural-fuzzy inference system), AHP (analytic hierarchy process), ANN (artificial neural network), probability frequency of landslides occurrence factors model and empirical model. The study evaluated various parameters that are responsible for landslide occurrence and the weighting for each parameter and its importance to probable of landslide activity. AHP method, Weights of evidence model, and back propagation method have been applied for weighting the factors. We found that using ANN algorithm with more than ten factors will give high accuracy result especially if the validation performs by field surveys data