660 research outputs found
Recommended from our members
Development of chromium-tungsten alloys
Cr alloys containing 0-30 weight % W were investigated for their high temperature strength and oxidation resistance. These experimental alloys are intended for use in elevated temperature applications. Alloys were melted in a water-cooled, copper-hearth arc furnace. Microstructure of the alloys was studied using X-ray diffraction, scanning electron microscopy, and light microscopy. Meyer and Vickers hardness tests were utilized for measuring room temperature strength. A hot hardness tester with a spherical ruby indenter was used to study the strength of these materials between 800ÂșC and 1200ÂșC. A parabolic relationship was observed between load and indent size at all temperatures. On the other hand, decrease in hardness of the alloys with temperature was linear up to 1200ÂșC
MICROSTRUCTURAL STABILITY AND OXIDATION RESISTANCE OF 9-12 CHROMIUM STEELS AT ELEVATED TEMPERATURES
ABSTRACT Various martensitic 9-12 Cr steels are utilized currently in fossil fuel powered energy plants for their good elevated temperature properties such as creep strength, steam side oxidation resistance, fire side corrosion resistance, and thermal fatigue resistance. Need for further improvements on the properties of 9-12 Cr steels for higher temperature (>600 o C) use is driven by the environmental concerns (i.e., improve efficiency to reduce emissions and fossil fuel consumption). In this paper, we will discuss the results of the research done to explore new subsitutional solute solution and precipitate hardening mechanisms for improved strength of 9-12 Cr martensitic steels. Stability of the phases present in the steels will be evaluated for various temperature and time exposures. A comparison of microstructural properties of the experimental steels and commercial steels will also be presented
Recommended from our members
Microstructural Stability and Oxidation Resistance of 9-12 Chromium Steels at Elevated Temperatures
Various martensitic 9-12 Cr steels are utilized currently in fossil fuel powered energy plants for their good elevated temperature properties such as creep strength, steam side oxidation resistance, fire side corrosion resistance, and thermal fatigue resistance. Need for further improvements on the properties of 9-12 Cr steels for higher temperature (>600oC) use is driven by the environmental concerns (i.e., improve efficiency to reduce emissions and fossil fuel consumption). In this paper, we will discuss the results of the research done to explore new subsitutional solute solution and precipitate hardening mechanisms for improved strength of 9-12 Cr martensitic steels. Stability of the phases present in the steels will be evaluated for various temperature and time exposures. A comparison of microstructural properties of the experimental steels and commercial steels will also be presented. The influence of a Ce surface treatment on oxidation behavior of a commercial (P91) and several experimental steels containing 9 to 12 weight percent Cr was examined at 650ÂșC in flowing dry and moist air. The oxidation behavior of all the alloys without the Ce modification was significantly degraded by the presence of moisture in the air during testing. For instance the weight gain for P91 was two orders of magnitude greater in moist air than in dry air. This was accompanied by a change in oxide scale from the formation of Cr-based scales in dry air to the formation of Fe-based scales in moist air. The Ce surface treatment was very effective in improving the oxidation resistance of the experimental steels in both moist and dry air. For instance, after exposure to moist air at 650ÂșC for 2000 hours, an experimental alloy with the cerium surface modification had a weight gain three orders of magnitude lower than the alloy without the Ce modification and two orders of magnitude lower than P91. The Ce surface treatment suppressed the formation of Fe-based scales and promoted the formation of more protective Cr-based scales. However, the Ce surface treatment was not effective in improving the resistance of P91. The results are discussed in terms of synergistic effects of constituent alloying elements
Recommended from our members
An update on field test results for an engineered refractory for slagging gasifiers
The widespread commercial adaptation of slagging gasifier technology to produce power, fuel, and/or chemicals from coal will depend in large measure on the technologyâs ability to prove itself both economic and reliable. Improvements in gasifier reliability, availability, and maintainability will in part depend on the development of improved performance structural materials with longer service life in this application. Current generation refractory materials used to line the air-cooled, slagging gasifier vessel, and contain the gasification reaction, often last no more than three to 18 months in commercial applications. The downtime required for tear-out and replacement of these critical materials contributes to gasifier on-line availabilities that fall short of targeted goals. In this talk we will discuss the development of an improved refractory material engineered by the NETL for longer service life in this application, and provide an update on recent field test results
Prospective in silico evaluation of cone-beam computed tomography-guided stereotactic adaptive radiation therapy (CT-STAR) for the ablative treatment of ultracentral thoracic disease
PURPOSE: We conducted a prospective, in silico study to evaluate the feasibility of cone-beam computed tomography (CBCT)-guided stereotactic adaptive radiation therapy (CT-STAR) for the treatment of ultracentral thoracic cancers (NCT04008537). We hypothesized that CT-STAR would reduce dose to organs at risk (OARs) compared with nonadaptive stereotactic body radiation therapy (SBRT) while maintaining adequate tumor coverage.
METHODS AND MATERIALS: Patients who were already receiving radiation therapy for ultracentral thoracic malignancies underwent 5 additional daily CBCTs on the ETHOS system as part of a prospective imaging study. These were used to simulate CT-STAR, in silico
RESULTS: Seven patients were accrued, 6 with intraparenchymal tumors and 1 with a subcarinal lymph node. CT-STAR was feasible in 34 of 35 simulated fractions. In total, 32 dose constraint violations occurred when the P
CONCLUSIONS: CT-STAR widened the dosimetric therapeutic index of ultracentral thorax SBRT compared with nonadaptive SBRT. A phase 1 protocol is underway to evaluate the safety of this paradigm for patients with ultracentral early-stage NSCLC
Addressing the high cervical cancer rates along the Texas-Mexico border through community outreach, patient navigation, and provider training/telementoring
Objective: Cervical cancer incidence and mortality rates are 68% and 57% higher, respectively, along the Texas-Mexico border compared with the rest of the United States. This is likely due to a combination of low health literacy, limited access to affordable screening, and a lack of trained personnel to perform colposcopy, loop electrosurgical excision procedures (LEEP), and appropriate management of women with pre-invasive disease. The objective of our study was to increase cervical cancer screening, diagnosis, and treatment rates in the Rio Grande Valley (RGV).
Method: We initiated a comprehensive program at two health centers and one mobile clinic in the RGV consisting of (1) a public education program designed for community health workers to teach women about cervical cancer screening and HPV vaccination coupled with patient navigation to participating clinics; (2) colposcopy and LEEP training for physicians and advanced-practice providers through locally held hands-on courses and mentoring program; and (3) implementation of Project ECHO (Extension for Community Health Outcomes), a well-established telementoring program using video conferencing to connect academic specialists with community providers for case-based learning. We compared screening, diagnosis, and treatment rates pre- and post-program implementation.
Results: From November 2014 to June 2018, local providers screened 19,028 women with Pap ± HPV testing (baseline 12,460, 53% increase); performed colposcopy on 2,644 women with abnormal screening results (baseline 945, 180% increase); and performed 483 LEEP procedures for treatment of cervical dysplasia (baseline 0). Ten women were diagnosed with invasive cancer and navigated to one of the participating gynecologic oncologists for treatment (baseline N/A). Five additional providers in the RGV completed the mentoring program to be certified to perform colposcopy (100% increase from baseline of 5) and two additional providers to perform LEEP (baseline 0). ECHO telementoring video conferences have been held every two weeks for a total 94 sessions (average of 22 participants/session) with 182 patient cases presented and discussed.
Conclusion: Our comprehensive approach has led to an increase in the number of women undergoing cervical cancer screening and diagnosis/treatment of dysplasia. If sustained, we anticipate these efforts will decrease cervical cancer rates in the RGV. The program is currently being expanded to additional medically underserved regions of Texas
Spectroscopic and Mechanistic Studies of Heterodimetallic Forms of Metallo-ÎČ-lactamase NDM-1
In an effort to characterize the roles of each metal ion in metallo-ÎČ-lactamase NDM-1, heterodimetallic analogues (CoCo-, ZnCo-, and CoCd-) of the enzyme were generated and characterized. UVâvis, 1H NMR, EPR, and EXAFS spectroscopies were used to confirm the fidelity of the metal substitutions, including the presence of a homogeneous, heterodimetallic cluster, with a single-atom bridge. This marks the first preparation of a metallo-ÎČ-lactamase selectively substituted with a paramagnetic metal ion, Co(II), either in the Zn1 (CoCd-NDM-1) or in the Zn2 site (ZnCo-NDM-1), as well as both (CoCo-NDM-1). We then used these metal-substituted forms of the enzyme to probe the reaction mechanism, using steady-state and stopped-flow kinetics, stopped-flow fluorescence, and rapid-freeze-quench EPR. Both metal sites show significant effects on the kinetic constants, and both paramagnetic variants (CoCd- and ZnCo-NDM-1) showed significant structural changes on reaction with substrate. These changes are discussed in terms of a minimal kinetic mechanism that incorporates all of the data
Measurement of Dijet Angular Distributions at CDF
We have used 106 pb^-1 of data collected in proton-antiproton collisions at
sqrt(s)=1.8 TeV by the Collider Detector at Fermilab to measure jet angular
distributions in events with two jets in the final state. The angular
distributions agree with next to leading order (NLO) predictions of Quantum
Chromodynamics (QCD) in all dijet invariant mass regions. The data exclude at
95% confidence level (CL) a model of quark substructure in which only up and
down quarks are composite and the contact interaction scale is Lambda_ud(+) <
1.6 TeV or Lambda_ud(-) < 1.4 TeV. For a model in which all quarks are
composite the excluded regions are Lambda(+) < 1.8 TeV and Lambda(-) < 1. 6
TeV.Comment: 16 pages, 2 figures, 2 tables, LaTex, using epsf.sty. Submitted to
Physical Review Letters on September 17, 1996. Postscript file of full paper
available at http://www-cdf.fnal.gov/physics/pub96/cdf3773_dijet_angle_prl.p
Search for New Particles Decaying to Dijets at CDF
We have used 106 pb^-1 of data collected with the Collider Detector at
Fermilab to search for new particles decaying to dijets. We exclude at the 95%
confidence level models containing the following new particles: axigluons and
flavor universal colorons with mass between 200 and 980 GeV/c, excited quarks
with mass between 80 and 570 GeV/c^2 and between 580 and 760 GeV/c^2, color
octet technirhos with mass between 260 and 480 GeV/c^2, W' bosons with mass
between 300 and 420 GeV/c^2, and E_6 diquarks with mass between 290 and 420
GeV/c^2.Comment: 18 pages, 4 figures, 1 table. Submitted to Physical Review D Rapid
Communications. Postscript file of paper is also available at
http://www-cdf.fnal.gov/physics/pub97/cdf3276_dijet_search_prd_rc.p
- âŠ