Patterns of gene action in plant development revealed by enhancer trap and gene trap transposable elements

The crucifer Arabidopsis thaliana has been used widely as a model organism for the study of plant development. We describe here the development of an efficient insertional mutagenesis system in Arabidopsis that permits identification of genes by their patterns of expression during development. Transposable elements of the Ac/Ds system carrying the GUS reporter gene have been designed to act as enhancer traps or gene traps. A novel selection scheme maximizes recovery of unlinked transposition events. In this study 491 plants carrying independent transposon insertions were generated and screened for expression patterns. One-half of the enhancer trap insertions and one-quarter of the gene trap insertions displayed GUS expression in seedlings or flowers, including expression patterns specific to organs, tissues, cell types, or developmental stages. The patterns identify genes that act during organogenesis, pattern formation, or cell differentiation. Transposon insertion lines with specific GUS expression patterns provide valuable markers for studies of Arabidopsis development and identify new cell types or subtypes in plants. The diversity of gene expression patterns generated suggests that the identification and cloning of Arabidopsis genes expressed in any developmental process is feasible using this system

Precautionary Regulation in Europe and the United States: A Quantitative Comparison

Much attention has been addressed to the question of whether Europe or the United States adopts a more precautionary stance to the regulation of potential environmental, health, and safety risks. Some commentators suggest that Europe is more risk-averse and precautionary, whereas the US is seen as more risk-taking and optimistic about the prospects for new technology. Others suggest that the US is more precautionary because its regulatory process is more legalistic and adversarial, while Europe is more lax and corporatist in its regulations. The flip-flop hypothesis claims that the US was more precautionary than Europe in the 1970s and early 1980s, and that Europe has become more precautionary since then. We examine the levels and trends in regulation of environmental, health, and safety risks since 1970. Unlike previous research, which has studied only a small set of prominent cases selected non-randomly, we develop a comprehensive list of almost 3,000 risks and code the relative stringency of regulation in Europe and the US for each of 100 risks randomly selected from that list for each year from 1970 through 2004. Our results suggest that: (a) averaging over risks, there is no significant difference in relative precaution over the period, (b) weakly consistent with the flip-flop hypothesis, there is some evidence of a modest shift toward greater relative precaution of European regulation since about 1990, although (c) there is a diversity of trends across risks, of which the most common is no change in relative precaution (including cases where Europe and the US are equally precautionary and where Europe or the US has been consistently more precautionary). The overall finding is of a mixed and diverse pattern of relative transatlantic precaution over the period

Tensile Fracture of Welded Polymer Interfaces: Miscibility, Entanglements and Crazing

Large-scale molecular simulations are performed to investigate tensile failure of polymer interfaces as a function of welding time $t$. Changes in the tensile stress, mode of failure and interfacial fracture energy $G_I$ are correlated to changes in the interfacial entanglements as determined from Primitive Path Analysis. Bulk polymers fail through craze formation, followed by craze breakdown through chain scission. At small $t$ welded interfaces are not strong enough to support craze formation and fail at small strains through chain pullout at the interface. Once chains have formed an average of about one entanglement across the interface, a stable craze is formed throughout the sample. The failure stress of the craze rises with welding time and the mode of craze breakdown changes from chain pullout to chain scission as the interface approaches bulk strength. The interfacial fracture energy $G_I$ is calculated by coupling the simulation results to a continuum fracture mechanics model. As in experiment, $G_I$ increases as $t^{1/2}$ before saturating at the average bulk fracture energy $G_b$. As in previous simulations of shear strength, saturation coincides with the recovery of the bulk entanglement density. Before saturation, $G_I$ is proportional to the areal density of interfacial entanglements. Immiscibiltiy limits interdiffusion and thus suppresses entanglements at the interface. Even small degrees of immisciblity reduce interfacial entanglements enough that failure occurs by chain pullout and $G_I \ll G_b$

The nonlinear time-dependent response of isotactic polypropylene

Tensile creep tests, tensile relaxation tests and a tensile test with a constant rate of strain are performed on injection-molded isotactic polypropylene at room temperature in the vicinity of the yield point. A constitutive model is derived for the time-dependent behavior of semi-crystalline polymers. A polymer is treated as an equivalent network of chains bridged by permanent junctions. The network is modelled as an ensemble of passive meso-regions (with affine nodes) and active meso-domains (where junctions slip with respect to their positions in the bulk medium with various rates). The distribution of activation energies for sliding in active meso-regions is described by a random energy model. Adjustable parameters in the stress--strain relations are found by fitting experimental data. It is demonstrated that the concentration of active meso-domains monotonically grows with strain, whereas the average potential energy for sliding of junctions and the standard deviation of activation energies suffer substantial drops at the yield point. With reference to the concept of dual population of crystalline lamellae, these changes in material parameters are attributed to transition from breakage of subsidiary (thin) lamellae in the sub-yield region to fragmentation of primary (thick) lamellae in the post-yield region of deformation.Comment: 29 pages, 12 figure

Extensional flow of hyaluronic acid solutions in an optimized micofluidic cross-slot device

We utilize a recently developed microfluidic device, the Optimized Shape Cross-slot Extensional Rheometer (OSCER), to study the elongational flow behavior and rheological properties of hyaluronic acid (HA) solutions representative of the synovial fluid (SF) found in the knee joint. The OSCER geometry is a stagnation point device that imposes a planar extensional flow with a homogenous extension rate over a significant length of the inlet and outlet channel axes. Due to the compressive nature of the flow generated along the inlet channels, and the planar elongational flow along the outlet channels, the flow field in the OSCER device can also be considered as representative of the flow field that arises between compressing articular cartilage layers of the knee joints during running or jumping movements. Full-field birefringence microscopy measurements demonstrate a high degree of localized macromolecular orientation along streamlines passing close to the stagnation point of the OSCER device, while micro-particle image velocimetry is used to quantify the flow kinematics. The stress-optical rule is used to assess the local extensional viscosity in the elongating fluid elements as a function of the measured deformation rate. The large limiting values of the dimensionless Trouton ratio, Tr ∼ O(50), demonstrate that these fluids are highly extensional-thickening, providing a clear mechanism for the load-dampening properties of SF. The results also indicate the potential for utilizing the OSCER in screening of physiological SF samples, which will lead to improved understanding of, and therapies for, disease progression in arthritis sufferers

Spatiotemporal flow instabilities of wormlike micellar solutions in rectangular microchannels

Flow velocimetry measurements are made on a non-shear-banding wormlike micellar solutionwithin high-aspect-ratio rectilinear microchannels over a wide range of imposed steady flow rates.At the lowest and highest flow rates tested, Newtonian-like velocity profiles are measured.However, at intermediate flow rates the velocity field never stabilizes on the timescale of theexperiments (up to several hours). Here, spatiotemporally dependent jets of high velocity fluidare observed to fluctuate within regions of essentially stagnant fluid. The reason for this flowinstability remains undetermined, but it has significant consequences for many industrialapplications and also for microfluidic rheometry of complex fluids

Microdevices for extensional rheometry of low viscosity elastic liquids : a review

Extensional flows and the underlying stability/instability mechanisms are of extreme relevance to the efficient operation of inkjet printing, coating processes and drug delivery systems, as well as for the generation of micro droplets. The development of an extensional rheometer to characterize the extensional properties of low viscosity fluids has therefore stimulated great interest of researchers, particularly in the last decade. Microfluidics has proven to be an extraordinary working platform and different configurations of potential extensional microrheometers have been proposed. In this review, we present an overview of several successful designs, together with a critical assessment of their capabilities and limitations

Multidisciplinary cancer care in Spain, or when the function creates the organ: qualitative interview study

Background The Spanish National Health System recognised multidisciplinary care as a health priority in 2006, when a national strategy for promoting quality in cancer care was first published. This institutional effort is being implemented on a co-operative basis within the context of Spain's decentralised health care system, so a high degree of variability is to be expected. This study was aimed to explore the views of professionals working with multidisciplinary cancer teams and identify which barriers to effective team work should be considered to ensure implementation of health policy. Methods Qualitative interview study with semi-structured, one-to-one interviews. Data were examined inductively, using content analysis to generate categories and an explanatory framework. 39 professionals performing their tasks, wholly or in part, in different multidisciplinary cancer teams were interviewed. The breakdown of participants' medical specialisations was as follows: medical oncologists (n = 10); radiation oncologists (n = 8); surgeons (n = 7); pathologists or radiologists (n = 6); oncology nurses (n = 5); and others (n = 3). Results Teams could be classified into three models of professional co-operation in multidisciplinary cancer care, namely, advisory committee, formal co-adaptation and integrated care process. The following barriers to implementation were posed: existence of different gateways for the same patient profile; variability in development and use of clinical protocols and guidelines; role of the hospital executive board; outcomes assessment; and the recording and documenting of clinical decisions in a multidisciplinary team setting. All these play a key role in the development of cancer teams and their ability to improve quality of care. Conclusion Cancer team development results from an specific adaptation to the hospital environment. Nevertheless, health policy plays an important role in promoting an organisational approach that changes the way in which professionals develop their clinical practice