Hot-air contactless single-point incremental forming

Single-point incremental forming (SPIF) has emerged as a time-efficient approach that offers increased material formability compared to conventional sheet-metal forming techniques. However, the physical interaction between the forming tool and the sheet poses challenges, such as tool wear and formability limits. This study introduces a novel sheet-forming technique called contactless single-point incremental forming (CSPIF), which uses hot compressed air as a deformation tool, eliminating the requirement for physical interaction between the sheet and a rigid forming tool. In this study, a polycarbonate sheet was chosen as the case-study material and subjected to the developed CSPIF. The experiments were carried out at an air temperature of 160 °C, air pressure of 1 bar, a nozzle speed of 750 mm/min, and a step-down thickness of 0.75 mm. A Schlieren setup and a thermal camera were used to visualize the motion of the compressed hot air as it traveled from the nozzle to the sheet. The results showed that the CSPIF technique allowed for the precise shaping of the polycarbonate sheet with minimal springback. However, minor deviations from the designed profile were observed, primarily at the starting point of the nozzle, which can be attributed to the bending effects of the sample. In addition, the occurrence of sheet thinning and material buildup on the deformed workpiece was also observed. The average surface roughness (Ra) of the deformed workpiece was measured to be 0.2871 micron

Optimisation of a novel hot air contactless single incremental point forming of polymers

This study presents a new contactless sheet forming method that utilises hot air as a forming tool to address tool wear challenges in single-point incremental forming. Experiments were conducted on a 3-axis CNC machine equipped with a hot air nozzle on a polycarbonate sheet. A design of experiment (DOE) approach was employed, evaluating five control factors: air pressure, air temperature, feed rate, tool offset, and step down. The evaluation criteria for the formed sheets are profile variation, thickness variation, and surface roughness. The results indicate that air temperature and feed rate have the most significant influence on the deformation process. Additionally, air pressure and feed rate substantially impact both thickness variation and surface roughness of the formed material. To optimise the process parameters for high-quality forming, a prediction model is developed. The optimised process shows good agreement with the predicted model regarding profile and thickness variations. However, it does not align with surface roughness due to the stepwise nature and inherent waviness of the contactless forming technique. This study offers a promising approach for developing innovative contactless forming techniques using hot pressurised air as a forming tool. The proposed technique has the potential to significantly reduce tool wear and lubrication requirements

Multi-locus phylogeny of the tribe Tragelaphini (Mammalia, Bovidae) and species delimitation in bushbuck: Evidence for chromosomal speciation mediated by interspecific hybridization

The bushbuck is the most widespread bovid species in Africa. Previous mitochondrial studies have revealed a polyphyletic pattern suggesting the possible existence of two distinct species. To assess this issue, we have sequenced 16 nuclear genes and one mitochondrial fragment (cytochrome b gene + control region) for most species of the tribe Tragelaphini, including seven bushbuck individuals belonging to the two divergent mtDNA haplogroups, Scriptus and Sylvaticus. Our phylogenetic analyses show that the Scriptus lineage is a sister-group of Sylvaticus in the nuclear tree, whereas it is related to Tragelaphus angasii in the mitochondrial tree. This mito-nuclear discordance indicates that the mitochondrial genome of Scriptus was acquired by introgression after one or several past events of hybridization between bushbuck and an extinct species closely related to T. angasii. The division into two bushbuck species is supported by the analyses of nuclear markers and by the karyotype here described for T. scriptus (2n = 57 M/58F), which is strikingly distinct from the one previously found for T. sylvaticus (2n = 33 M/34F). Molecular dating estimates suggest that the two species separated during the Early Pleistocene after an event of interspecific hybridization, which may have mediated massive chromosomal rearrangements in the common ancestor of T. scriptus

A case of uterine gangrene after termination of second trimester pregnancy complicated by chorioamnionitis

Uterine gangrene is a rare event during pregnancy. Here, we report the case of a 22-year-old patient pregnant in her second trimester presenting with premature rupture of membranes and a low-lying placenta. Hysterotomy was done to evacuate the pregnancy. The procedure was complicated by hemorrhage so bilateral uterine arteries and the left internal iliac artery were ligated to control the bleeding. She continued to run a fever in spite of antibiotics and on the 11th postoperative day, the patient developed signs of septicemia. Abdominal re-exploration was done revealing a gangrenous uterus with signs of peritonitis. Subtotal hysterectomy was done. The patient was discharged from the hospital in good health on the 10th post repeat laparotomy day

Draft genome of the lowland anoa (Bubalus depressicornis) and comparison with buffalo genome assemblies (Bovidae, Bubalina)

Genomic data for wild species of the genus Bubalus (Asian buffaloes) are still lacking while several whole genomes are currently available for domestic water buffaloes. To address this, we sequenced the genome of a wild endangered dwarf buffalo, the lowland anoa (Bubalus depressicornis), produced a draft genome assembly, and made comparison to published buffalo genomes. The lowland anoa genome assembly was 2.56 Gbp long and contained 103,135 contigs, the longest contig being 337.39 kbp long. N50 and L50 values were 38.73 kbp and 19.83 kbp, respectively, mean coverage was 44x and GC content was 41.74%. Two strategies were adopted to evaluate genome completeness: (i) determination of genomic features with de novo and homology-based predictions using annotations of chromosome-level genome assembly of the river buffalo, and (ii) employment of benchmarking against universal single-copy orthologs (BUSCO). Homology-based predictions identified 94.51% complete and 3.65% partial genomic features. De novo gene predictions identified 32,393 genes, representing 97.14% of the reference's annotated genes, whilst BUSCO search against the mammalian orthologues database identified 71.1% complete, 11.7% fragmented and 17.2% missing orthologues, indicating a good level of completeness for downstream analyses. Repeat analyses indicated that the lowland anoa genome contains 42.12% of repetitive regions. The genome assembly of the lowland anoa is expected to contribute to comparative genome analyses among bovid species. [Abstract copyright: © The Author(s) 2022. Published by Oxford University Press on behalf of Genetics Society of America.

Elastomer-based visuotactile sensor for normality of robotic manufacturing systems

Modern aircrafts require the assembly of thousands of components with high accuracy and reliability. The normality of drilled holes is a critical geometrical tolerance that is required to be achieved in order to realize an efficient assembly process. Failure to achieve the required tolerance leads to structures prone to fatigue problems and assembly errors. Elastomer-based tactile sensors have been used to support robots in acquiring useful physical interaction information with the environments. However, current tactile sensors have not yet been developed to support robotic machining in achieving the tight tolerances of aerospace structures. In this paper, a novel elastomer-based tactile sensor was developed for cobot machining. Three commercial silicon-based elastomer materials were characterised using mechanical testing in order to select a material with the best deformability. A Finite element model was developed to simulate the deformation of the tactile sensor upon interacting with surfaces with different normalities. Additive manufacturing was employed to fabricate the tactile sensor mould, which was chemically etched to improve the surface quality. The tactile sensor was obtained by directly casting and curing the optimum elastomer material onto the additively manufactured mould. A machine learning approach was used to train the simulated and experimental data obtained from the sensor. The capability of the developed vision tactile sensor was evaluated using real-world experiments with various inclination angles, and achieved a mean perpendicularity tolerance of 0.34°. The developed sensor opens a new perspective on low-cost precision cobot machining

Hybrid finite element–smoothed particle hydrodynamics modelling for optimizing cutting parameters in CFRP composites

Carbon-fibre-reinforced plastic (CFRP) is increasingly being used in various applications including aerospace, automotive, wind energy, sports, and robotics, which makes the precision modelling of its machining operations a critical research area. However, the classic finite element modelling (FEM) approach has limitations in capturing the complexity of machining, particularly with regard to the interaction between the fibre–matrix interface and the cutting edge. To overcome this limitation, a hybrid approach that integrates smoothed particle hydrodynamics (SPHs) with FEM was developed and tested in this study. The hybrid FEM-SPH approach was compared with the classic FEM approach and validated with experimental measurements that took into account the cutting tool’s round edge. The results showed that the hybrid FEM-SPH approach outperformed the classic FEM approach in predicting the thrust force and bounce back of CFRP machining due to the integrated cohesive model and the element conversion after failure in the developed approach. The accurate representation of the fibre–matrix interface in the FEM-SPH approach resulted in predicting precise chip formation in terms of direction and morphology. Nonetheless, the computing time of the FEM-SPH approach is higher than the classic FEM. The developed hybrid FEM-SPH model is promising for improving the accuracy of simulation in machining processes, combining the benefits of both techniques

Optimising surface roughness and density in titanium fabrication via laser powder bed fusion

The Ti6Al4V alloy has many advantages, such as being lightweight, formal, and resistant to corrosion. This makes it highly desirable for various applications, especially in the aerospace industry. Laser Powder Bed Fusion (LPBF) is a technique that allows for the production of detailed and unique parts with great flexibility in design. However, there are challenges when it comes to achieving high-quality surfaces and porosity formation in the material, which limits the wider use of LPBF. To tackle these challenges, this study uses statistical techniques called Design of Experiments (DoE) and Analysis of Variance (ANOVA) to investigate and optimise the process parameters of LPBF for making Ti6Al4V components with improved density and surface finish. The parameters examined in this study are laser power, laser scan speed, and hatch space. The optimisation study results show that using specific laser settings, like a laser power of 175 W, a laser scan speed of 1914 mm/s, and a hatch space of 53 µm, produces Ti6Al4V parts with a high relative density of 99.54% and low top and side surface roughness of 2.6 µm and 4.3 µm, respectively. This promising outcome demonstrates the practicality of optimising Ti6Al4V and other metal materials for a wide range of applications, thereby overcoming existing limitations and further expanding the potential of LPBF while minimising inherent process issues

Designing lightweight 3D-printable bioinspired structures for enhanced compression and energy absorption properties

Recent progress in additive manufacturing, also known as 3D printing, has offered several benefits, including high geometrical freedom and the ability to create bioinspired structures with intricate details. Mantis shrimp can scrape the shells of prey molluscs with its hammer-shaped stick, while beetles have highly adapted forewings that are lightweight, tough, and strong. This paper introduces a design approach for bioinspired lattice structures by mimicking the internal microstructures of a beetle’s forewing, a mantis shrimp’s shell, and a mantis shrimp’s dactyl club, with improved mechanical properties. Finite element analysis (FEA) and experimental characterisation of 3D printed polylactic acid (PLA) samples with bioinspired structures were performed to determine their compression and impact properties. The results showed that designing a bioinspired lattice with unit cells parallel to the load direction improved quasi-static compressive performance, among other lattice structures. The gyroid honeycomb lattice design of the insect forewings and mantis shrimp dactyl clubs outperformed the gyroid honeycomb design of the mantis shrimp shell, with improvements in ultimate mechanical strength, Young’s modulus, and drop weight impact. On the other hand, hybrid designs created by merging two different designs reduced bending deformation to control collapse during drop weight impact. This work holds promise for the development of bioinspired lattices employing designs with improved properties, which can have potential implications for lightweight high-performance applications