Design, synthesis, crystal structures and biological evaluation of some 1,3-thiazolidin-4-ones as dual CDK2/EGFR potent inhibitors with potential apoptotic antiproliferative effects

A series of novel thiazolidine-4-one derivatives was synthesized by reacting 1,4-disubstituted hydrazine carbothioamides with diethyl azodicarboxylate. The structures were confirmed by spectroscopic data as well as single-crystal X-ray analyses. The antiproliferative activity of the synthesized compounds was investigated against four human cancer cell lines using an MTT assay. Compounds 5d, 5e, and 5f revealed the most potent antiproliferative activity with GI$_{50}$ values ranging from 0.70 µM to 1.20 µM, compared to doxorubicin GI$_{50}$ value = 1.10 µM. Compounds 5d, 5e, and 5f were further investigated for their inhibitory activities against CDK2 and EGFR as potential targets for their molecular mechanism. Compounds 5e and 5f have showed potent inhibitory activity to CDK2 enzyme with IC$_{50}$ values of 18 and 14 nM, which is more potent than the reference dinaciclib (IC$_{50}$ = 20 nM). Moreover, compounds 5e and 5f were the most potent EGFR inhibitors, with IC$_{50}$ values of 93 and 87 nM, respectively, compared to the reference erlotinib (IC$_{50}$ = 70 nM). In addition, the most potent derivatives were tested for their apoptotic activity against caspases 3, 8, and 9, and the results showed that compounds 5d, 5e, and 5f revealed a greater increase in active caspases 3,8 and 9 than doxorubicin. Also, compounds 5d, 5e, and 5f elevated cytochrome C levels in the MCF-7 human breast cancer cell line by about 15.5, 15.8, and 16.5 times, respectively. Finally, a molecular docking study was performed to investigate the binding sites of these compounds within the active sites of CDK2 and EGFR targets, and the results confirmed that the most potent CDK2 and EGFR inhibitor 5h also have showed the highest docking score

Design, synthesis, crystal structures and biological evaluation of some 1,3-thiazolidin-4-ones as dual CDK2/EGFR potent inhibitors with potential apoptotic antiproliferative effects

A series of novel thiazolidine-4-one derivatives was synthesized by reacting 1,4disubstituted hydrazine carbothioamides with diethyl azodicarboxylate. The structures were confirmed by spectroscopic data as well as single-crystal X-ray analyses. The antiproliferative activity of the synthesized compounds was investigated against four human cancer cell lines using an MTT assay. Compounds 5d, 5e, and 5f revealed the most potent antiproliferative activity with GI50 values ranging from 0.70 mM to 1.20 mM, compared to doxorubicin GI50 value = 1.10 mM. Compounds 5d, 5e, and 5f were further investigated for their inhibitory activities against CDK2 and EGFR as potential targets for their molecular mechanism. Compounds 5e and 5f have showed potent inhibitory activity to CDK2 enzyme with IC50 values of 18 and 14 nM, which is more potent than the reference dinaciclib (IC50 = 20 nM). Moreover, compounds 5e and 5f were the most potent EGFR inhibitors, with IC50 values of 93 and 87 nM, respectively, compared to the reference erlotinib (IC50 = 70 nM). In addition, the most potent derivatives were tested for their apoptotic activity against caspases 3, 8, and 9, and the results showed that compounds 5d, 5e, and 5f revealed a greater increase in active caspases 3,8 and 9 than doxorubicin. Also, compounds 5d, 5e, and 5f elevated cytochrome C levels in the MCF-7 human breast cancer cell line by about 15.5, 15.8, and 16.5 times, respectively. Finally, a molecular docking study was performed to investigate the binding sites of these compounds within the active sites of CDK2 and EGFR targets, and the results confirmed that the most potent CDK2 and EGFR inhibitor 5h also have showed the highest docking (c) 2022 The Author(s). Published by Elsevier B.V. on behalf of King Saud University. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).Peer reviewe

Synthesis and Structure Determination of Substituted Thiazole Derivatives as EGFR/BRAFV600E^{V600E} Dual Inhibitors Endowed with Antiproliferative Activity

2,3,4-trisubstituted thiazoles 3a–i, having a methyl group in position four, were synthesized by the reaction of 1,4-disubstituted thiosemicarbazides with chloroacetone in ethyl acetate/Et$_3$N at room temperature or in ethanol under reflux. The structures of new compounds were determined using NMR spectroscopy, mass spectrometry, and elemental analyses. Moreover, the structure of compound 3a was unambiguously confirmed with X-ray analysis. The cell viability assay of 3a–i at 50 µM was greater than 87%, and none of the tested substances were cytotoxic. Compounds 3a–i demonstrated good antiproliferative activity, with GI$_{50}$ values ranging from 37 to 86 nM against the four tested human cancer cell lines, compared to the reference erlotinib, which had a GI$_{50}$ value of 33 nM. The most potent derivatives were found to be compounds 3a, 3c, 3d, and 3f, with GI50 values ranging from 37 nM to 54 nM. The EGFR-TK and BRAF$^{V600E}$ inhibitory assays’ results matched the antiproliferative assay’s results, with the most potent derivatives, as antiproliferative agents, also being the most potent EGFR and BRAF$^{V600E}$ inhibitors. The docking computations were employed to investigate the docking modes and scores of compounds 3a, 3c, 3d, and 3f toward BRAF$^{V600E}$ and EGFR. Docking computations demonstrated the good affinity of compound 3f against BRAF$^{V600E}$ and EGFR, with values of −8.7 and −8.5 kcal/mol, respectively

Synthesis of novel amidines via one-pot three component reactions: Selective topoisomerase I inhibitors with antiproliferative properties

Novel series of amidines were synthesized via the interaction between alicyclic amines, cyclic ketones, and a highly electrophilic 4-azidoquinolin-2(1H)-ones without any catalyst or additive. All the obtained products were elucidated based on NMR spectroscopy, mass spectrometry, and elemental analysis. The reaction conditions were optimized using cyclohexanone (2), piperidine (3a), and 4-azido-quinolin-2(1H)-one (1a) under an air atmosphere. The new compounds 4a-l and 5a-c were tested for antiproliferative activity against four cancer cell lines using doxorubicin as a reference drug. The most potent derivatives were compounds 4b, 4d, 4e, 4i, and 5c, with GI$_{50}$ ranging from 1.00 µM to 1.50 µM. Compound 5c was the most effective derivative against the four cancer cell lines, outperforming doxorubicin. The compounds 4b, 4d, 4e, 4i, and 5c were studied further as topoisomerase I and IIα inhibitors. The compounds tested showed selective inhibition of topo I over topo IIα. Finally, docking studies explain why these compounds prefer topo I over topo IIα

Asymptotic homogenization model for 3D grid-reinforced composite structures with generally orthotropic reinforcements

The asymptotic homogenization method is used to develop a comprehensive micromechanical model pertaining to three-dimensional composite structures with an embedded periodic grid of generally orthotropic reinforcements. The model developed transforms the original boundary-value problem into a simpler one characterized by some effective elastic coefficients. These effective coefficients are shown to depend only on the geometric and material parameters of the unit cell and are free from the periodicity complications that characterize their original material counterparts. As a consequence they can be used to study a wide variety of boundary-value problems associated with the composite of a given microstructure. The developed model is applied to different examples of orthotropic composite structures with cubic, conical and diagonal reinforcement orientations. It is shown in these examples that the model allows for complete flexibility in designing a grid-reinforced composite structure with desirable elastic coefficients to conform to any engineering application by changing some material and/or geometric parameter of interest. It is also shown in this work that in the limiting particular case of 2D grid-reinforced structure with isotropic reinforcements our results converge to the earlier published results

Micromechanical modeling of 3D grid-reinforced composite structures and nanocomposites

A micromechanical model for 3D composite structures with an embedded regular grid of generally orthotropic reinforcements is developed and applied to various anisotropic structures to calculate effective elastic properties. The model is based on application of the multiscale asymptotic homogenization technique, and it allows application to composite materials of various scales, including 3D grid-reinforced nanostructures. The model provides flexibility in the design of such structures with desirable properties by changing material and/or geometric parameters. It is illustrated by means of several examples of practical importance including single walled carbon nanotubes, 3D grid-reinforced nanocomposite materials, and 3D grid-reinforced orthotropic composite structures with different arrangements of generally orthotropic reinforcements. The explicit formulae for Young's and Shear moduli of single walled carbon nanotubes are derived in terms of the pertinent material and geometric characteristics. It is noted that the reinforcements can be in the form of covalent bonds such as the ones that exist between carbon atoms in carbon nanotubes or other nanostructures

Micromechanical model for 3D generally orthotropic grid-reinforced composites

A micromechanical model for 3D composites with an embedded periodic grid of generally orthotropic reinforcements is developed and applied to anisotropic structures with cubic, conical and diagonal reinforcement orientations to calculate effective elastic coefficients. The model allows flexibility in the design of such structures with desirable coefficients by changing material and/or geometric parameters

An asymptotic homogenization model for smart 3D grid-reinforced composite structures with generally orthotropic constituents

A comprehensive micromechanical model for smart 3D composite structures reinforced with a periodic grid of generally orthotropic cylindrical reinforcements that also exhibit piezoelectric behavior is developed. The original boundary value problem characterizing the piezothermoelastic behavior of these structures is decoupled into a set of three simpler unit cell problems dealing, separately, with the elastic, piezoelectric and thermal expansion characteristics of the smart composite. The technique used is that of asymptotic homogenization and the solution of the unit cell problems permits determination of the effective elastic, piezoelectric and thermal expansion coefficients. The general orthotropy of the constituent materials is very important from the practical viewpoint and makes the analysis much more complicated. Several examples of practical interest are used to illustrate the work including smart 3D composites with cubic and conical embedded grids as well as diagonally reinforced smart structures. It is also shown in this work that in the limiting particular case of 2D grid-reinforced structures with isotropic reinforcements our results converge to earlier published results