290 research outputs found
Synthetic Radar Dataset Generator for Macro-Gesture Recognition
Recent developments in mmWave technology allow the detection and classification of dynamic arm gestures. However, achieving a high accuracy and generalization requires a lot of samples for the training of a machine learning model. Furthermore, in order to capture variability in the gesture class, the participation of many subjects and the conduct of many gestures with different arm speed are required. In case of macro-gestures, the position of the subject must also vary inside the field of view of the device. This would require a significant amount of time and effort, which needs to be repeated in case that the sensor hardware or the modulation parameters are modified. In order to reduce the required manual effort, here we developed a synthetic data generator that is capable of simulating seven arm gestures by utilizing Blender, an open-source 3D creation suite. We used it to generate 600 artificial samples with varying speed of execution and relative position of the simulated subject, and used them to train a machine learning model. We tested the model using a real dataset recorded from ten subjects, using an experimental sensor. The test set yielded 84.2% accuracy, indicating that synthetic data generation can significantly contribute in the pre-training of a model
Fast high fidelity quantum non-demolition qubit readout via a non-perturbative cross-Kerr coupling
Qubit readout is an indispensable element of any quantum information
processor. In this work, we experimentally demonstrate a non-perturbative
cross-Kerr coupling between a transmon and a polariton mode which enables an
improved quantum non-demolition (QND) readout for superconducting qubits. The
new mechanism uses the same experimental techniques as the standard QND qubit
readout in the dispersive approximation, but due to its non-perturbative
nature, it maximizes the speed, the single-shot fidelity and the QND properties
of the readout. In addition, it minimizes the effect of unwanted decay channels
such as the Purcell effect. We observed a single-shot readout fidelity of 97.4%
for short 50 ns pulses, and we quantified a QND-ness of 99% for long
measurement pulses with repeated single-shot readouts
Qubit readout using in-situ bifurcation of a nonlinear dissipative polariton in the mesoscopic regime
We explore the nonlinear response to a strong drive of polaritonic meters for
superconducting qubit state readout. The two polaritonic meters result from the
strong hybridization between a bosonic mode of a 3D microwave cavity and an
anharmonic ancilla mode of the superconducting circuit. Both polaritons inherit
a self-Kerr nonlinearity , and decay rate from the ancilla and
cavity, respectively. They are coupled to a transmon qubit via a
non-perturbative cross-Kerr coupling resulting in a large cavity pull . By applying magnitic flux, the ancilla mode frequency varies
modifying the hybridization conditions and thus the properties of the readout
polariton modes. Using this, the hybridisation is tuned in the mesoscopic
regime of the non-linear dissipative polariton where the self-Kerr and decay
rates of one polariton are similar leading to bistability and
bifurcation behavior at small photon number. This bistability and bifurcation
behavior depends on the qubit state and we report qubit state readout in a
latching-like manner thanks to the bifurcation of the upper polariton. Without
any external quantum-limited amplifier, we obtain a single-shot fidelity of
in a ns integration time
Performance of prototypes for the ALICE electromagnetic calorimeter
The performance of prototypes for the ALICE electromagnetic sampling
calorimeter has been studied in test beam measurements at FNAL and CERN. A
array of final design modules showed an energy resolution of about
11% / 1.7 % with a uniformity of the response
to electrons of 1% and a good linearity in the energy range from 10 to 100 GeV.
The electromagnetic shower position resolution was found to be described by 1.5
mm 5.3 mm /. For an electron identification
efficiency of 90% a hadron rejection factor of was obtained.Comment: 10 pages, 10 figure
Transverse Momentum Dependent Parton Distribution/Fragmentation Functions at an Electron-Ion Collider
We present a summary of a recent workshop held at Duke University on Partonic
Transverse Momentum in Hadrons: Quark Spin-Orbit Correlations and Quark-Gluon
Interactions. The transverse momentum dependent parton distribution functions
(TMDs), parton-to-hadron fragmentation functions, and multi-parton correlation
functions, were discussed extensively at the Duke workshop. In this paper, we
summarize first the theoretical issues concerning the study of partonic
structure of hadrons at a future electron-ion collider (EIC) with emphasis on
the TMDs. We then present simulation results on experimental studies of TMDs
through measurements of single spin asymmetries (SSA) from semi-inclusive
deep-inelastic scattering (SIDIS) processes with an EIC, and discuss the
requirement of the detector for SIDIS measurements. The dynamics of parton
correlations in the nucleon is further explored via a study of SSA in D (`D)
production at large transverse momenta with the aim of accessing the unexplored
tri-gluon correlation functions. The workshop participants identified the SSA
measurements in SIDIS as a golden program to study TMDs in both the sea and
valence quark regions and to study the role of gluons, with the Sivers
asymmetry measurements as examples. Such measurements will lead to major
advancement in our understanding of TMDs in the valence quark region, and more
importantly also allow for the investigation of TMDs in the sea quark region
along with a study of their evolution.Comment: 44 pages 23 figures, summary of Duke EIC workshop on TMDs accepted by
EPJ
Precise Measurements of Beam Spin Asymmetries in Semi-inclusive π\u3csup\u3e0\u3c/sup\u3e Production
We present studies of single-spin asymmetries for neutral pion electroproduction in semi-inclusive deep-inelastic scattering of 5.776 GeV polarized electrons from an unpolarized hydrogen target, using the CEBAF Large Acceptance Spectrometer (CLAS) at the Thomas Jefferson National Accelerator Facility. A substantial sin phi(h) amplitude has been measured in the distribution of the cross section asymmetry as a function of the azimuthal angle φh of the produced neutral pion. The dependence of this amplitude on Bjorken x and on the pion transverse momentum is extracted with significantly higher precision than previous data and is compared to model calculations. (C) 2011 Elsevier B.V
Measurement of Angular Distributions and R= sigma_L/sigma_T in Diffractive Electroproduction of rho^0 Mesons
Production and decay angular distributions were extracted from measurements
of exclusive electroproduction of the rho^0(770) meson over a range in the
virtual photon negative four-momentum squared 0.5< Q^2 <4 GeV^2 and the
photon-nucleon invariant mass range 3.8< W <6.5 GeV. The experiment was
performed with the HERMES spectrometer, using a longitudinally polarized
positron beam and a ^3He gas target internal to the HERA e^{+-} storage ring.
The event sample combines rho^0 mesons produced incoherently off individual
nucleons and coherently off the nucleus as a whole. The distributions in one
production angle and two angles describing the rho^0 -> pi+ pi- decay yielded
measurements of eight elements of the spin-density matrix, including one that
had not been measured before. The results are consistent with the dominance of
helicity-conserving amplitudes and natural parity exchange. The improved
precision achieved at 47 GeV,
reveals evidence for an energy dependence in the ratio R of the longitudinal to
transverse cross sections at constant Q^2.Comment: 15 pages, 15 embedded figures, LaTeX for SVJour(epj) document class
Revision: Fig. 15 corrected, recent data added to Figs. 10,12,14,15; minor
changes to tex
- …